JAJSF13C March   2018  – January 2019 ADS1260 , ADS1261

PRODUCTION DATA.  

  1. 特長
  2. アプリケーション
  3. 概要
    1.     Device Images
      1.      ブロック図
  4. 改訂履歴
  5. 概要(続き)
  6. Device Comparison Table
  7. Pin Configuration and Functions
    1.     Pin Functions
  8. Specifications
    1. 8.1 Absolute Maximum Ratings
    2. 8.2 ESD Ratings
    3. 8.3 Recommended Operating Conditions
    4. 8.4 Thermal Information
    5. 8.5 Electrical Characteristics
    6. 8.6 Timing Requirements
    7. 8.7 Switching Characteristics
    8. 8.8 Typical Characteristics
  9. Parameter Measurement Information
    1. 9.1 Noise Performance
  10. 10Detailed Description
    1. 10.1 Overview
    2. 10.2 Functional Block Diagram
    3. 10.3 Feature Description
      1. 10.3.1  Analog Inputs
        1. 10.3.1.1 ESD Diodes
        2. 10.3.1.2 Input Multiplexer
        3. 10.3.1.3 Temperature Sensor
        4. 10.3.1.4 Power-Supply Readback
        5. 10.3.1.5 Inputs Open
        6. 10.3.1.6 Internal VCOM Connection
        7. 10.3.1.7 Alternate Functions
      2. 10.3.2  PGA
        1. 10.3.2.1 PGA Bypass Mode
        2. 10.3.2.2 PGA Voltage Monitor
      3. 10.3.3  Reference Voltage
        1. 10.3.3.1 Internal Reference
        2. 10.3.3.2 External Reference
        3. 10.3.3.3 AVDD - AVSS Reference (Default)
        4. 10.3.3.4 Reference Monitor
      4. 10.3.4  Level-Shift Voltage (VBIAS)
      5. 10.3.5  Burn-Out Current Sources
      6. 10.3.6  Sensor-Excitation Current Sources (IDAC1 and IDAC2)
      7. 10.3.7  General-Purpose Input/Outputs (GPIOs)
      8. 10.3.8  Oversampling
      9. 10.3.9  Modulator
      10. 10.3.10 Digital Filter
        1. 10.3.10.1 Sinc Filter
          1. 10.3.10.1.1 Sinc Filter Frequency Response
        2. 10.3.10.2 FIR Filter
          1. 10.3.10.2.1 FIR Filter Frequency Response
        3. 10.3.10.3 Filter Bandwidth
        4. 10.3.10.4 50-Hz and 60-Hz Normal Mode Rejection
    4. 10.4 Device Functional Modes
      1. 10.4.1 Conversion Control
        1. 10.4.1.1 Continuous-Conversion Mode
        2. 10.4.1.2 Pulse-Conversion Mode
        3. 10.4.1.3 Conversion Latency
        4. 10.4.1.4 Start-Conversion Delay
      2. 10.4.2 Chop Mode
      3. 10.4.3 AC-Excitation Mode
      4. 10.4.4 ADC Clock Mode
      5. 10.4.5 Power-Down Mode
        1. 10.4.5.1 Hardware Power-Down
        2. 10.4.5.2 Software Power-Down
      6. 10.4.6 Reset
        1. 10.4.6.1 Power-on Reset
        2. 10.4.6.2 Reset by Pin
        3. 10.4.6.3 Reset by Command
      7. 10.4.7 Calibration
        1. 10.4.7.1 Offset and Full-Scale Calibration
          1. 10.4.7.1.1 Offset Calibration Registers
          2. 10.4.7.1.2 Full-Scale Calibration Registers
        2. 10.4.7.2 Offset Self-Calibration (SFOCAL)
        3. 10.4.7.3 Offset System-Calibration (SYOCAL)
        4. 10.4.7.4 Full-Scale Calibration (GANCAL)
        5. 10.4.7.5 Calibration Command Procedure
        6. 10.4.7.6 User Calibration Procedure
    5. 10.5 Programming
      1. 10.5.1 Serial Interface
        1. 10.5.1.1 Chip Select (CS)
        2. 10.5.1.2 Serial Clock (SCLK)
        3. 10.5.1.3 Data Input (DIN)
        4. 10.5.1.4 Data Output/Data Ready (DOUT/DRDY)
        5. 10.5.1.5 Serial Interface Auto-Reset
      2. 10.5.2 Data Ready (DRDY)
        1. 10.5.2.1 DRDY in Continuous-Conversion Mode
        2. 10.5.2.2 DRDY in Pulse-Conversion Mode
        3. 10.5.2.3 Data Ready by Software Polling
      3. 10.5.3 Conversion Data
        1. 10.5.3.1 Status byte (STATUS)
        2. 10.5.3.2 Conversion Data Format
      4. 10.5.4 CRC
      5. 10.5.5 Commands
        1. 10.5.5.1  NOP Command
        2. 10.5.5.2  RESET Command
        3. 10.5.5.3  START Command
        4. 10.5.5.4  STOP Command
        5. 10.5.5.5  RDATA Command
        6. 10.5.5.6  SYOCAL Command
        7. 10.5.5.7  GANCAL Command
        8. 10.5.5.8  SFOCAL Command
        9. 10.5.5.9  RREG Command
        10. 10.5.5.10 WREG Command
        11. 10.5.5.11 LOCK Command
        12. 10.5.5.12 UNLOCK Command
    6. 10.6 Register Map
      1. 10.6.1  Device Identification (ID) Register (address = 00h) [reset = xxh]
        1. Table 30. ID Register Field Descriptions
      2. 10.6.2  Device Status (STATUS) Register (address = 01h) [reset = 01h]
        1. Table 31. STATUS Register Field Descriptions
      3. 10.6.3  Mode 0 (MODE0) Register (address = 02h) [reset = 24h]
        1. Table 32. MODE0 Register Field Descriptions
      4. 10.6.4  Mode 1 (MODE1) Register (address = 03h) [reset = 01h]
        1. Table 33. MODE1 Register Field Descriptions
      5. 10.6.5  Mode 2 (MODE2) Register (address = 04h) [reset = 00h]
        1. Table 34. MODE2 Register Field Descriptions
      6. 10.6.6  Mode 3 (MODE3) Register (address = 05h) [reset = 00h]
        1. Table 35. MODE3 Register Field Descriptions
      7. 10.6.7  Reference Configuration (REF) Register (address = 06h) [reset = 05h]
        1. Table 36. REF Register Field Descriptions
      8. 10.6.8  Offset Calibration (OFCALx) Registers (address = 07h, 08h, 09h) [reset = 00h, 00h, 00h]
        1. Table 37. OFCAL0, OFCAL1, OFCAL2 Registers Field Description
      9. 10.6.9  Full-Scale Calibration (FSCALx) Registers (address = 0Ah, 0Bh, 0Ch) [reset = 00h, 00h, 40h]
        1. Table 38. FSCAL0, FSCAL1, FSCAL2 Registers Field Description
      10. 10.6.10 IDAC Multiplexer (IMUX) Register (address = 0Dh) [reset = FFh]
        1. Table 39. IMUX Register Field Descriptions
      11. 10.6.11 IDAC Magnitude (IMAG) Register (address = 0Eh) [reset = 00h]
        1. Table 40. IMAG Register Field Descriptions
      12. 10.6.12 Reserved (RESERVED) Register (address = 0Fh) [reset = 00h]
        1. Table 41. RESERVED Register Field Descriptions
      13. 10.6.13 PGA Configuration (PGA) Register (address = 10h) [reset = 00h]
        1. Table 42. PGA Register Field Descriptions
      14. 10.6.14 Input Multiplexer (INPMUX) Register (address = 11h) [reset = FFh]
        1. Table 43. INPMUX Register Field Descriptions
      15. 10.6.15 Input Bias (INPBIAS) Register (address = 12h) [reset = 00h]
        1. Table 44. INPBIAS Register Field Descriptions
  11. 11Application and Implementation
    1. 11.1 Application Information
      1. 11.1.1 Input Range
      2. 11.1.2 Input Overload
      3. 11.1.3 Burn-Out Current Source
      4. 11.1.4 Unused Inputs and Outputs
      5. 11.1.5 AC-Excitation
      6. 11.1.6 Serial Interface and Digital Connections
    2. 11.2 Typical Application
      1. 11.2.1 Design Requirements
      2. 11.2.2 Detailed Design Procedure
      3. 11.2.3 Application Curves
    3. 11.3 Initialization Setup
  12. 12Power Supply Recommendations
    1. 12.1 Power-Supply Decoupling
    2. 12.2 Analog Power-Supply Clamp
    3. 12.3 Power-Supply Sequencing
  13. 13Layout
    1. 13.1 Layout Guidelines
    2. 13.2 Layout Example
  14. 14デバイスおよびドキュメントのサポート
    1. 14.1 ドキュメントのサポート
      1. 14.1.1 関連資料
    2. 14.2 関連リンク
    3. 14.3 ドキュメントの更新通知を受け取る方法
    4. 14.4 コミュニティ・リソース
    5. 14.5 商標
    6. 14.6 静電気放電に関する注意事項
    7. 14.7 Glossary
  15. 15メカニカル、パッケージ、および注文情報

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ(パッケージ|ピン)
  • RHB|32
サーマルパッド・メカニカル・データ
発注情報

Noise Performance

The ADS126x noise performance depends on the ADC configuration: data rate, PGA gain, digital filter configuration, and chop mode. The combination of the parameters affect noise performance. Two significant factors affecting noise performance are data rate and PGA gain. Since the profile of noise is predominantly white (flat vs frequency), decreasing the data rate proportionally decreases bandwidth and therefore, total noise. Since the noise of the PGA is lower than that of the modulator of the ADC, increasing the gain reduces noise when treated as an input-referred quantity. Noise performance also depends on the digital filter and chop mode. As the order of the digital filter increases, the noise bandwidth correspondingly decreases resulting in lower noise. Further, as a result of two-point data averaging in chop mode, noise performance improves by √2 compared to normal operation.

Table 1 shows noise performance in units of μVRMS (RMS = root mean square) under the conditions listed. The values in parenthesis are peak-to-peak values. Table 2 shows the noise performance in effective resolution (bits) under the specified conditions. The values shown in parenthesis are the noise-free resolution. Noise-free resolution is the resolution of the ADC with no code flicker. The noise-free resolution data are calculated based on the peak-to-peak noise measurements.

The effective resolution data listed in the tables are calculated using Equation 1:

Equation 1. Effective Resolution or Noise-Free Resolution = ln (FSR / en) / ln (2)

where

  • FSR = full scale range = 2 · VREF / Gain (See Recommended Operating Conditions for FSR)
  • en = Input referred voltage noise (RMS value to calculate effective resolution, p-p value to calculate noise-free resolution)

The data shown in the noise performance table represent typical ADC performance at TA = 25°C. The noise-performance data are the standard deviation and peak-to-peak computations of the ADC data. The noise data are acquired with inputs shorted, based on consecutive ADC readings for a period of ten seconds or 8192 data points, whichever occurs first. Because of the statistical nature of noise, repeated noise measurements may yield higher or lower noise performance results.

As a result of the increased full-scale input range provided by 5-V reference operation, effective resolution and noise-free resolution performance are typically optimized using a 5-V reference. The effective resolution and noise-free resolution performance data shown in Table 2 are with external 5-V reference operation.

Table 1. Noise in µVRMS (µVPP) at TA = 25°C and Internal 2.5-V Reference

DATA RATE (SPS) FILTER GAIN
1 2 4 8 16 32 64 128
2.5 FIR 0.18 (0.6) 0.078 (0.28) 0.046 (0.16) 0.025 (0.096) 0.014 (0.053) 0.012 (0.045) 0.01 (0.042) 0.01 (0.04)
2.5 Sinc1 0.15 (0.47) 0.071 (0.28) 0.038 (0.14) 0.019 (0.075) 0.012 (0.051) 0.01 (0.039) 0.009 (0.037) 0.009 (0.037)
2.5 Sinc2 0.14 (0.38) 0.065 (0.23) 0.032 (0.096) 0.018 (0.059) 0.011 (0.037) 0.007 (0.028) 0.007 (0.028) 0.008 (0.033)
2.5 Sinc3 0.12 (0.38) 0.062 (0.17) 0.028 (0.064) 0.016 (0.053) 0.01 (0.035) 0.008 (0.027) 0.007 (0.026) 0.006 (0.023)
2.5 Sinc4 0.1 (0.26) 0.059 (0.17) 0.032 (0.085) 0.016 (0.059) 0.010 (0.035) 0.008 (0.027) 0.006 (0.025) 0.006 (0.024)
5 FIR 0.22 (0.89) 0.11 (0.4) 0.058 (0.24) 0.032 (0.13) 0.021 (0.085) 0.016 (0.065) 0.014 (0.061) 0.015 (0.066)
5 Sinc1 0.18 (0.6) 0.093 (0.36) 0.047 (0.17) 0.025 (0.11) 0.017 (0.069) 0.014 (0.061) 0.012 (0.054) 0.014 (0.063)
5 Sinc2 0.16 (0.64) 0.084 (0.32) 0.043 (0.16) 0.023 (0.085) 0.015 (0.064) 0.011 (0.047) 0.010(0.046) 0.011 (0.049)
5 Sinc3 0.13 (0.51) 0.088 (0.32) 0.036 (0.15) 0.024 (0.091) 0.014 (0.053) 0.01 (0.043) 0.009 (0.045) 0.009 (0.042)
5 Sinc4 0.13 (0.51) 0.077 (0.28) 0.034 (0.12) 0.021 (0.075) 0.013 (0.053) 0.010 (0.044) 0.008 (0.038) 0.009 (0.038)
10 FIR 0.27 (1.4) 0.14 (0.72) 0.076 (0.4) 0.042 (0.21) 0.029 (0.15) 0.023 (0.12) 0.023 (0.11) 0.022 (0.11)
10 Sinc1 0.23 (1.1) 0.13 (0.57) 0.064 (0.3) 0.036 (0.19) 0.024 (0.13) 0.02 (0.1) 0.018 (0.083) 0.018 (0.089)
10 Sinc2 0.2 (0.89) 0.11 (0.51) 0.054 (0.24) 0.03 (0.14) 0.019 (0.093) 0.015 (0.075) 0.015 (0.079) 0.016 (0.077)
10 Sinc3 0.18 (0.81) 0.097 (0.38) 0.05 (0.22) 0.028 (0.14) 0.019 (0.088) 0.015 (0.063) 0.013 (0.067) 0.013 (0.065)
10 Sinc4 0.17 (0.68) 0.099 (0.45) 0.049 (0.24) 0.024 (0.12) 0.018 (0.085) 0.013 (0.063) 0.012 (0.061) 0.012 (0.062)
16.6 Sinc1 0.3 (1.4) 0.16 (0.81) 0.082 (0.43) 0.048 (0.25) 0.031 (0.17) 0.025 (0.15) 0.024 (0.12) 0.024 (0.14)
16.6 Sinc2 0.24 (1.2) 0.13 (0.64) 0.067 (0.34) 0.038 (0.2) 0.026 (0.14) 0.021 (0.11) 0.019 (0.099) 0.019 (0.098)
16.6 Sinc3 0.22 (0.98) 0.12 (0.64) 0.065 (0.3) 0.036 (0.18) 0.024 (0.12) 0.019 (0.095) 0.017 (0.092) 0.018 (0.093)
16.6 Sinc4 0.21 (1.1) 0.12 (0.53) 0.06 (0.29) 0.035 (0.18) 0.022 (0.11) 0.017 (0.084) 0.016 (0.085) 0.016 (0.086)
20 FIR 0.37 (2) 0.2 (1.1) 0.1 (0.56) 0.059 (0.34) 0.041 (0.22) 0.034 (0.18) 0.029 (0.17) 0.03 (0.15)
20 Sinc1 0.32 (1.8) 0.18 (0.92) 0.091 (0.48) 0.051 (0.26) 0.034 (0.2) 0.028 (0.15) 0.025 (0.14) 0.025 (0.14)
20 Sinc2 0.27 (1.4) 0.15 (0.77) 0.073 (0.35) 0.042 (0.22) 0.027 (0.14) 0.022 (0.13) 0.021 (0.11) 0.02 (0.11)
20 Sinc3 0.24 (1.2) 0.13 (0.64) 0.069 (0.35) 0.039 (0.21) 0.026 (0.14) 0.02 (0.11) 0.018 (0.099) 0.018 (0.1)
20 Sinc4 0.23 (1.1) 0.13 (0.66) 0.066 (0.33) 0.037 (0.19) 0.024 (0.12) 0.018 (0.095) 0.017 (0.095) 0.017 (0.099)
50 Sinc1 0.49 (2.9) 0.27 (1.6) 0.14 (0.83) 0.08 (0.5) 0.053 (0.31) 0.043 (0.25) 0.039 (0.23) 0.038 (0.23)
50 Sinc2 0.4 (2.3) 0.22 (1.3) 0.11 (0.69) 0.064 (0.38) 0.043 (0.27) 0.035 (0.22) 0.033 (0.2) 0.032 (0.2)
50 Sinc3 0.37 (2.2) 0.2 (1.2) 0.11 (0.64) 0.058 (0.35) 0.04 (0.25) 0.033 (0.19) 0.029 (0.18) 0.03 (0.18)
50 Sinc4 0.34 (2) 0.19 (1.1) 0.098 (0.61) 0.056 (0.32) 0.036 (0.23) 0.03 (0.17) 0.028 (0.17) 0.028 (0.17)
60 Sinc1 0.55 (3.3) 0.28 (1.9) 0.15 (0.88) 0.087 (0.53) 0.058 (0.34) 0.047 (0.28) 0.044 (0.29) 0.042 (0.26)
60 Sinc2 0.45 (2.7) 0.24 (1.4) 0.12 (0.71) 0.07 (0.45) 0.048 (0.32) 0.039 (0.25) 0.036 (0.21) 0.035 (0.21)
60 Sinc3 0.41 (2.7) 0.21 (1.3) 0.11 (0.68) 0.065 (0.4) 0.044 (0.25) 0.036 (0.23) 0.032 (0.19) 0.031 (0.19)
60 Sinc4 0.37 (2) 0.2 (1.1) 0.11 (0.6) 0.059 (0.36) 0.041 (0.25) 0.033 (0.21) 0.03 (0.18) 0.03 (0.17)
100 Sinc1 0.69 (4.5) 0.37 (2.4) 0.19 (1.3) 0.11 (0.73) 0.075 (0.5) 0.06 (0.39) 0.056 (0.37) 0.056 (0.38)
100 Sinc2 0.56 (3.5) 0.3 (1.9) 0.16 (0.97) 0.09 (0.55) 0.062 (0.39) 0.051 (0.32) 0.046 (0.31) 0.045 (0.29)
100 Sinc3 0.51 (3.4) 0.27 (1.8) 0.14 (0.9) 0.083 (0.51) 0.056 (0.36) 0.045 (0.3) 0.041 (0.27) 0.041 (0.25)
100 Sinc4 0.48 (3.3) 0.26 (1.6) 0.14 (0.87) 0.078 (0.48) 0.053 (0.34) 0.043 (0.27) 0.039 (0.24) 0.039 (0.26)
400 Sinc1 1.4 (9.6) 0.72 (5.4) 0.38 (2.7) 0.22 (1.6) 0.15 (1.1) 0.12 (0.85) 0.11 (0.85) 0.11 (0.79)
400 Sinc2 1.1 (8.2) 0.58 (4.2) 0.31 (2.3) 0.18 (1.3) 0.12 (0.9) 0.099 (0.74) 0.091 (0.65) 0.091 (0.69)
400 Sinc3 1 (7.4) 0.53 (3.7) 0.28 (2) 0.17 (1.2) 0.11 (0.8) 0.09 (0.66) 0.083 (0.61) 0.083 (0.59)
400 Sinc4 0.95 (6.9) 0.51 (3.6) 0.27 (1.9) 0.15 (1.2) 0.1 (0.7) 0.084 (0.58) 0.077 (0.55) 0.077 (0.57)
1200 Sinc1 2.3 (17) 1.2 (9.2) 0.64 (5) 0.37 (2.9) 0.25 (1.9) 0.2 (1.6) 0.19 (1.4) 0.19 (1.5)
1200 Sinc2 1.9 (14) 1 (7.6) 0.54 (3.9) 0.31 (2.4) 0.21 (1.6) 0.17 (1.3) 0.16 (1.2) 0.16 (1.2)
1200 Sinc3 1.8 (13) 0.92 (7) 0.49 (3.7) 0.29 (2.2) 0.19 (1.4) 0.16 (1.2) 0.14 (1.1) 0.14 (1.1)
1200 Sinc4 1.6 (12) 0.86 (6.4) 0.46 (3.6) 0.27 (2) 0.18 (1.4) 0.15 (1.1) 0.13 (1) 0.13 (1)
2400 Sinc1 3.2 (25) 1.7 (13) 0.88 (6.7) 0.51 (3.9) 0.35 (2.7) 0.28 (2.2) 0.26 (2) 0.26 (2)
2400 Sinc2 2.7 (21) 1.4 (10) 0.76 (5.8) 0.44 (3.3) 0.3 (2.2) 0.24 (1.9) 0.22 (1.6) 0.22 (1.6)
2400 Sinc3 2.5 (19) 1.3 (9.8) 0.69 (5.2) 0.4 (3) 0.27 (2.1) 0.22 (1.7) 0.2 (1.6) 0.2 (1.5)
2400 Sinc4 2.3 (17) 1.2 (9.4) 0.65 (4.9) 0.37 (2.8) 0.25 (2) 0.21 (1.5) 0.19 (1.5) 0.19 (1.4)
4800 Sinc1 4.3 (33) 2.3 (17) 1.2 (9.4) 0.69 (5.2) 0.46 (3.5) 0.37 (2.9) 0.34 (2.6) 0.34 (2.6)
4800 Sinc2 3.8 (29) 2 (15) 1.1 (8.5) 0.61 (4.7) 0.41 (3.1) 0.33 (2.6) 0.31 (2.3) 0.3 (2.3)
4800 Sinc3 3.5 (27) 1.8 (14) 0.97 (7.2) 0.56 (4.1) 0.38 (3) 0.31 (2.4) 0.28 (2.1) 0.28 (2.2)
4800 Sinc4 3.3 (25) 1.7 (13) 0.92 (7.1) 0.53 (4.1) 0.36 (2.7) 0.29 (2.2) 0.27 (2.1) 0.27 (1.9)
7200 Sinc1 5 (38) 2.6 (20) 1.4 (10) 0.8 (6) 0.53 (4) 0.43 (3.2) 0.39 (2.9) 0.39 (2.9)
7200 Sinc2 4.6 (35) 2.4 (19) 1.3 (9.9) 0.73 (5.4) 0.49 (3.8) 0.39 (2.9) 0.36 (2.8) 0.36 (2.7)
7200 Sinc3 4.3 (33) 2.2 (17) 1.2 (9.3) 0.68 (5) 0.46 (3.6) 0.37 (2.8) 0.34 (2.5) 0.34 (2.6)
7200 Sinc4 4.1 (31) 2.1 (15) 1.1 (8.8) 0.65 (5) 0.44 (3.3) 0.35 (2.6) 0.33 (2.5) 0.32 (2.5)
14400 Sinc5 6 (47) 3.1 (24) 1.7 (13) 0.93 (7.1) 0.61 (4.9) 0.49 (3.8) 0.45 (3.5) 0.45 (3.4)
19200 Sinc5 8.5 (67) 4.3 (34) 2.3 (17) 1.2 (9.6) 0.77 (6) 0.57 (4.3) 0.54 (4) 0.53 (4.1)
25600 Sinc5 19 (140) 9.5 (73) 4.8 (37) 2.5 (18) 1.3 (10) 0.83 (6.3) 0.8 (6) 0.81 (6)
40000 Sinc5 30 (220) 15 (110) 7.7 (56) 3.9 (29) 2 (15) 1.2 (9.4) 1.2 (8.9) 1.2 (9)

Table 2. Effective Resolution (Noise-Free Resolution) at TA = 25°C and External 5-V Reference

DATA RATE (SPS) FILTER GAIN
1 2 4 8 16 32 64 128
2.5 FIR 24 (24) 24 (22.8) 24 (23.8) 24 (23.8) 24 (23.8) 24 (22.8) 24 (22) 23 (20.8)
2.5 Sinc1 24 (24) 24 (22.8) 24 (23.8) 24 (23.8) 24 (22.8) 24 (22.8) 24 (22.4) 23.2 (21.2)
2.5 Sinc2 24 (24) 24 (22.8) 24 (23.8) 22.8 (23.8) 21.8 (22.8) 24 (23.8) 24 (22.4) 23.9 (22)
2.5 Sinc3 24 (24) 24 (22.8) 24 (23.8) 22.8 (23.8) 24 (23.8) 24 (23.8) 24 (22.4) 23.8 (22)
2.5 Sinc4 24 (24) 24 (22.8) 24 (23.8) 22.8 (23.8) 24 (23.8) 24 (23.8) 24 (23) 23.5 (22)
5 FIR 24 (23) 24 (22.8) 24 (23.8) 24 (22.8) 24 (22.2) 24 (21.8) 23.6 (21.7) 22.5 (20.7)
5 Sinc1 24 (23.7) 24 (23.8) 24 (23.8) 24 (22.8) 24 (22.2) 24 (22.8) 23.3 (21.4) 22.8 (20.7)
5 Sinc2 24 (24) 24 (23.8) 24 (23.8) 24 (23.8) 24 (23.8) 24 (22.8) 23.7 (21.7) 22.8 (21)
5 Sinc3 24 (24) 24 (23.8) 24 (23.8) 24 (23.8) 24 (23.8) 24 (22.8) 23.5 (21.4) 23.5 (21.7)
5 Sinc4 24 (24) 24 (23.8) 24 (23.8) 22.8 (23.8) 24 (23.8) 24 (23.8) 24 (22) 23.3 (21.2)
10 FIR 24 (22.4) 24 (22.8) 24 (22.8) 24 (22.2) 24 (21.8) 23.5 (21.2) 22.8 (20.5) 22.1 (19.9)
10 Sinc1 24 (23) 24 (22.8) 24 (22.8) 24 (22.8) 24 (22.2) 23.6 (21.2) 23.4 (21.2) 22.3 (19.8)
10 Sinc2 24 (23) 24 (22.8) 24 (22.8) 24 (22.8) 24 (22.2) 24 (22.2) 23.2 (21.4) 22.3 (20.2)
10 Sinc3 24 (24) 24 (22.8) 24 (23.8) 24 (23.8) 24 (22.8) 24 (22.2) 23.3 (21.2) 22.7 (20.7)
10 Sinc4 24 (24) 24 (22.8) 24 (23.8) 24 (22.8) 24 (22.8) 24 (22.2) 23.7 (21.4) 22.9 (20.8)
16.6 Sinc1 24 (22) 24 (21.8) 24 (22.2) 24 (21.8) 23.7 (21.2) 23.4 (21) 22.5 (20.3) 21.8 (19.6)
16.6 Sinc2 24 (22.4) 24 (22.8) 24 (22.2) 24 (22.2) 24 (21.8) 23.7 (21.2) 23 (20.7) 22 (19.5)
16.6 Sinc3 24 (23) 24 (22.8) 24 (22.2) 24 (22.8) 24 (22.8) 23.9 (21.5) 23.1 (21) 22 (19.8)
16.6 Sinc4 24 (23) 24 (22.8) 24 (22.8) 24 (22.8) 24 (22.2) 24 (21.5) 23.4 (20.7) 22.5 (20.1)
20 FIR 24 (22) 23.8 (21.5) 23.9 (21.8) 23.9 (21.5) 23.5 (21) 22.9 (20.5) 22.2 (19.8) 21.3 (18.7)
20 Sinc1 24 (22) 24 (22.2) 24 (21.8) 23.9 (21.8) 23.7 (21.5) 23.3 (21) 22.6 (20.3) 21.5 (19.2)
20 Sinc2 24 (23) 24 (22.2) 24 (22.2) 24 (21.8) 24 (21.8) 23.6 (21.2) 22.8 (20.3) 21.9 (19.6)
20 Sinc3 24 (22.4) 24 (22.8) 24 (22.2) 24 (22.8) 24 (21.8) 23.7 (21.5) 23 (20.7) 21.9 (19.4)
20 Sinc4 24 (23) 24 (22.8) 24 (22.8) 24 (22.2) 24 (22.2) 23.8 (21.2) 23.1 (20.7) 22 (19.4)
50 Sinc1 23.9 (21.4) 23.7 (21.5) 23.7 (21.2) 23.5 (20.8) 23.3 (20.6) 22.6 (20) 21.9 (19.3) 21 (18.6)
50 Sinc2 24 (21.7) 23.9 (21.5) 23.8 (21.2) 23.7 (21.5) 23.5 (20.8) 22.9 (20.2) 22.1 (19.3) 21.2 (18.8)
50 Sinc3 24 (22) 23.9 (21.5) 23.9 (21.5) 23.8 (21) 23.6 (21.2) 23 (20.5) 22.3 (19.8) 21.3 (18.6)
50 Sinc4 24 (22) 24 (21.8) 24 (21.8) 23.9 (21.5) 23.7 (21.2) 23.2 (20.8) 22.4 (20) 21.5 (18.9)
60 Sinc1 23.7 (21.4) 23.6 (21) 23.6 (21.2) 23.4 (20.8) 23.1 (20.5) 22.5 (19.9) 21.8 (19.1) 20.8 (18.2)
60 Sinc2 24 (21.4) 23.8 (21.5) 23.7 (21.2) 23.6 (21.2) 23.4 (20.8) 22.7 (20.2) 22.1 (19.3) 21.2 (18.5)
60 Sinc3 24 (21.7) 23.9 (21.5) 23.9 (21.5) 23.7 (21.2) 23.5 (20.8) 22.9 (20.5) 22.2 (19.5) 21.2 (18.8)
60 Sinc4 24 (22) 24 (21.8) 23.9 (21.5) 23.7 (21.2) 23.4 (20.6) 23 (20.2) 22.2 (19.5) 21.2 (18.7)
100 Sinc1 23.6 (21) 23.4 (20.6) 23.3 (20.5) 23.1 (20.4) 22.8 (20) 22.1 (19.4) 21.4 (18.8) 20.5 (17.7)
100 Sinc2 23.8 (21) 23.6 (21) 23.6 (21) 23.4 (21) 23 (20.2) 22.4 (19.7) 21.7 (19.1) 20.8 (18)
100 Sinc3 23.8 (21.2) 23.6 (21.2) 23.6 (21) 23.5 (21) 23.2 (20.5) 22.5 (19.9) 21.8 (19) 20.8 (17.9)
100 Sinc4 23.9 (21.4) 23.7 (21.2) 23.7 (21.2) 23.6 (21) 23.3 (20.6) 22.6 (19.7) 21.9 (19.4) 21 (18.1)
400 Sinc1 22.8 (19.8) 22.5 (19.7) 22.5 (19.6) 22.3 (19.6) 21.9 (19) 21.2 (18.2) 20.4 (17.6) 19.5 (16.6)
400 Sinc2 23.1 (20.3) 22.8 (20.1) 22.8 (20) 22.6 (19.6) 22.1 (19.2) 21.4 (18.6) 20.7 (17.9) 19.8 (17.1)
400 Sinc3 23.1 (20.4) 22.9 (20) 22.8 (19.9) 22.7 (20) 22.3 (19.4) 21.5 (18.7) 20.8 (17.8) 19.9 (17)
400 Sinc4 23.2 (20.3) 23 (20.2) 22.9 (20.1) 22.7 (20.1) 22.3 (19.5) 21.7 (18.9) 21 (18) 20 (17.2)
1200 Sinc1 22.1 (19.2) 21.8 (19.1) 21.7 (18.9) 21.6 (18.7) 21.1 (18.3) 20.4 (17.5) 19.7 (16.8) 18.8 (15.7)
1200 Sinc2 22.3 (19.5) 22.1 (19.3) 22 (19.1) 21.8 (18.9) 21.4 (18.4) 20.6 (17.7) 20 (17.1) 19 (16)
1200 Sinc3 22.4 (19.6) 22.2 (19.2) 22.1 (19.2) 21.9 (19) 21.5 (18.5) 20.8 (18) 20.1 (17.2) 19.2 (16.2)
1200 Sinc4 22.5 (19.6) 22.3 (19.6) 22.2 (19.2) 22 (19.1) 21.6 (18.7) 20.9 (18) 20.2 (17.3) 19.2 (16.4)
2400 Sinc1 21.6 (18.7) 21.4 (18.3) 21.3 (18.4) 21.1 (18.1) 20.7 (17.7) 19.9 (17.1) 19.2 (16.2) 18.3 (15.4)
2400 Sinc2 21.8 (18.8) 21.6 (18.6) 21.5 (18.6) 21.3 (18.5) 20.9 (18) 20.2 (17.3) 19.5 (16.6) 18.5 (15.6)
2400 Sinc3 21.9 (19.1) 21.7 (18.8) 21.6 (18.6) 21.4 (18.6) 21 (18.1) 20.3 (17.5) 19.6 (16.7) 18.7 (15.7)
2400 Sinc4 22 (19.1) 21.8 (19) 21.8 (19) 21.6 (18.6) 21.1 (18) 20.4 (17.5) 19.7 (16.7) 18.8 (15.9)
4800 Sinc1 21.1 (18.1) 20.9 (17.9) 20.9 (17.9) 20.6 (17.7) 20.2 (17.2) 19.5 (16.6) 18.8 (15.8) 17.9 (14.9)
4800 Sinc2 21.3 (18.4) 21.1 (18.1) 21 (18.1) 20.8 (17.9) 20.4 (17.4) 19.7 (16.6) 19 (16.1) 18 (14.9)
4800 Sinc3 21.4 (18.4) 21.2 (18.3) 21.1 (18.3) 21 (18) 20.5 (17.6) 19.8 (16.8) 19.1 (16.3) 18.2 (15.1)
4800 Sinc4 21.5 (18.6) 21.3 (18.4) 21.2 (18.2) 21.1 (18.1) 20.6 (17.7) 19.9 (17) 19.2 (16.3) 18.2 (15.3)
7200 Sinc1 20.9 (17.8) 20.7 (17.7) 20.6 (17.4) 20.4 (17.5) 20 (17) 19.3 (16.4) 18.6 (15.7) 17.7 (14.7)
7200 Sinc2 21 (18.1) 20.8 (17.9) 20.7 (17.9) 20.6 (17.6) 20.2 (17.2) 19.4 (16.4) 18.7 (15.9) 17.8 (14.9)
7200 Sinc3 21.1 (18.1) 20.9 (18.1) 20.8 (17.9) 20.6 (17.8) 20.2 (17.2) 19.5 (16.5) 18.8 (15.9) 17.9 (14.9)
7200 Sinc4 21.2 (18.1) 21 (18) 20.9 (18.1) 20.7 (18) 20.3 (17.2) 19.6 (16.7) 18.9 (15.9) 18 (15)
14400 Sinc5 20.5 (17.7) 20.3 (17.5) 20.2 (17.3) 20.1 (17.1) 19.8 (16.9) 19.1 (16.1) 18.4 (15.4) 17.5 (14.5)
19200 Sinc5 19.7 (16.8) 19.5 (16.5) 19.4 (16.5) 19.4 (16.3) 19.2 (16.2) 18.8 (15.9) 18 (15.1) 17 (14.2)
25600 Sinc5 18.2 (15.2) 18 (14.9) 18 (15.2) 17.9 (14.7) 17.9 (15.1) 17.8 (14.8) 17 (14.2) 16 (13.2)
40000 Sinc5 17.4 (14.6) 17.2 (14.2) 17.2 (14.2) 17.2 (14.3) 17.2 (14.2) 17.1 (14.3) 16.3 (13.4) 15.3 (12.5)