Typical values stated where TA = 25°C and VBAT = 59.2 V, min/max values stated where TA = -40°C to 85°C and VBAT = 4.7 V to 80 V (unless otherwise noted)(1)
||Internal pullup current from BAT pin to LD pin, used for load detect functionality
||VBAT ≥ 4.7 V, VLD = VSS
||Internal pulldown resistance on LD pin in SHUTDOWN mode
||VBAT ≥ 4.7 V
(1) Operation with VBAT up to 80 V is supported when the charge pump is not in operation. Whenever the charge pump is in operation (in 5.5 V or 11 V mode), the maximum voltage on VBAT should be reduced to ensure the voltage on CP1, CHG, and DSG does not exceed their maximum specified voltage.