5.43.3 Current Consumption, Reduced-Power ModesTA = 25°C, VCC = 3 V (unless otherwise noted)(1)
||RF crystal oscillator only(3)
|IDLE state (including RF crystal oscillator)
| FSTXON state (only the frequency synthesizer is running)(2)
All measurement results are obtained using the EM430F6137RF900 with BOM according to tested frequency range (see Table 7-1
(2) This current consumption is also representative of other intermediate states when going from IDLE to RX or TX, including the calibration state.
To measure the current, follow this sequence:
- Enable XT2 with XOSC_FORCE_ON = 1.
- Set radio to sleep mode.
- Disable XT2 clock requests from any module.