SNLS579A April 2018 – November 2018 DP83TC811S-Q1
|Autonomous Command||Reserved||Sleep Enable||LPS Transmission Enable|
|6||Autonomous Command||RW, COR||Strap||Autonomous Command:
1 = Device in Autonomous operation
0 = Device in Managed operation
Note: This bit is a one-time event. Once written to or read, the bit will always read 0b0. Managed mode can only be entered at power-up or reset when the bootstrap is sampled.
|1||Sleep Enable||RW||1||Sleep Enable:
1 = Sleep enabled
0 = Standby enabled
The device will transition to Sleep state after negotiating with a Link Partner if this bit is set. Otherwise, once LPS negotiation is complete, the device will transition to Standby.
|0||LPS Transmission Enable||RW||0||LPS Transmission Enable:
1 = Device allowed to send LPS code-groups
0 = No LPS code-groups enabled
Device is only allowed to send LPS code-groups when this bit is set.