SPRSP35G February   2019  – March 2021 DRA829J , DRA829V

ADVANCE INFORMATION  

  1. Features
  2. Applications
  3. Description
    1. 3.1 Functional Block Diagram
  4. Revision History
  5. Device Comparison
    1. 5.1 Related Products
  6. Terminal Configuration and Functions
    1. 6.1 Pin Diagram
    2. 6.2 Pin Attributes
    3. 6.3 Signal Descriptions
      1. 6.3.1  ADC
        1. 6.3.1.1 MCU Domain
      2. 6.3.2  DDRSS
        1. 6.3.2.1 MAIN Domain
      3. 6.3.3  GPIO
        1. 6.3.3.1 MAIN Domain
        2. 6.3.3.2 WKUP Domain
      4. 6.3.4  I2C
        1. 6.3.4.1 MAIN Domain
        2. 6.3.4.2 MCU Domain
        3. 6.3.4.3 WKUP Domain
      5. 6.3.5  I3C
        1. 6.3.5.1 MAIN Domain
        2. 6.3.5.2 MCU Domain
      6. 6.3.6  MCAN
        1. 6.3.6.1 MAIN Domain
        2. 6.3.6.2 MCU Domain
      7. 6.3.7  MCSPI
        1. 6.3.7.1 MAIN Domain
        2. 6.3.7.2 MCU Domain
      8. 6.3.8  UART
        1. 6.3.8.1 MAIN Domain
        2. 6.3.8.2 MCU Domain
        3. 6.3.8.3 WKUP Domain
      9. 6.3.9  MDIO
        1. 6.3.9.1 MCU Domain
      10. 6.3.10 CPSW2G
        1. 6.3.10.1 MCU Domain
      11. 6.3.11 CPSW9G
        1. 6.3.11.1 MAIN Domain
      12. 6.3.12 ECAP
        1. 6.3.12.1 MAIN Domain
      13. 6.3.13 EQEP
        1. 6.3.13.1 MAIN Domain
      14. 6.3.14 EHRPWM
        1. 6.3.14.1 MAIN Domain
      15. 6.3.15 USB
        1. 6.3.15.1 MAIN Domain
      16. 6.3.16 SERDES
        1. 6.3.16.1 MAIN Domain
      17. 6.3.17 OSPI
        1. 6.3.17.1 MCU Domain
      18. 6.3.18 Hyperbus
        1. 6.3.18.1 MCU Domain
      19. 6.3.19 GPMC
        1. 6.3.19.1 MAIN Domain
      20. 6.3.20 MMC
        1. 6.3.20.1 MAIN Domain
      21. 6.3.21 CPTS
        1. 6.3.21.1 MAIN Domain
      22. 6.3.22 UFS
        1. 6.3.22.1 MAIN Domain
      23. 6.3.23 PRU_ICSSG [Currently Not Supported]
        1. 6.3.23.1 MAIN Domain
      24. 6.3.24 MCASP
        1. 6.3.24.1 MAIN Domain
      25. 6.3.25 DSS
        1. 6.3.25.1 MAIN Domain
      26. 6.3.26 DP
        1. 6.3.26.1 MAIN Domain
      27. 6.3.27 Camera Streaming Interface Receiver (CSI_RX_IF) Subsystem
        1. 6.3.27.1 MAIN Domain
      28. 6.3.28 DSI_TX
        1. 6.3.28.1 MAIN Domain
      29. 6.3.29 VPFE
        1. 6.3.29.1 MAIN Domain
      30. 6.3.30 DMTIMER
        1. 6.3.30.1 MAIN Domain
        2. 6.3.30.2 MCU Domain
      31. 6.3.31 Emulation and Debug
        1. 6.3.31.1 MAIN Domain
      32. 6.3.32 System and Miscellaneous
        1. 6.3.32.1 Boot Mode Configuration
          1. 6.3.32.1.1 MAIN Domain
          2. 6.3.32.1.2 MCU Domain
        2. 6.3.32.2 Clock
          1. 6.3.32.2.1 MAIN Domain
          2. 6.3.32.2.2 WKUP Domain
        3. 6.3.32.3 System
          1. 6.3.32.3.1 MAIN Domain
          2. 6.3.32.3.2 WKUP Domain
        4. 6.3.32.4 EFUSE
      33. 6.3.33 Power Supply
    4. 6.4 Pin Multiplexing
    5. 6.5 Connections for Unused Pins
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Power-On-Hour (POH) Limits
    4. 7.4  Recommended Operating Conditions
    5. 7.5  Operating Performance Points
    6. 7.6  Power Consumption Summary
    7. 7.7  Electrical Characteristics
      1. 7.7.1 USB2PHY Electrical Characteristics
      2. 7.7.2 SerDes 2-L-PHY/4-L-PHY Electrical Characteristics
      3. 7.7.3 UFS M-PHY Electrical Characteristics
      4. 7.7.4 eDP/DP AUX-PHY Electrical Characteristics
      5. 7.7.5 DDR0 Electrical Characteristics
    8. 7.8  VPP Specifications for One-Time Programmable (OTP) eFuses
      1. 7.8.1 Recommended Operating Conditions for OTP eFuse Programming
      2. 7.8.2 Hardware Requirements
      3. 7.8.3 Programming Sequence
      4. 7.8.4 Impact to Your Hardware Warranty
    9. 7.9  Thermal Resistance Characteristics
      1. 7.9.1 Thermal Resistance Characteristics for ALF Package
    10. 7.10 Timing and Switching Characteristics
      1. 7.10.1 Timing Parameters and Information
      2. 7.10.2 Power Supply Sequencing
        1. 7.10.2.1 Power Supply Slew Rate Requirement
        2. 7.10.2.2 Combined MCU and Main Domains Power-Up Sequencing
        3. 7.10.2.3 Combined MCU and Main Domains Power- Down Sequencing
        4. 7.10.2.4 Independent MCU and Main Domains Power- Up Sequencing
        5. 7.10.2.5 Independent MCU and Main Domains, Primary Power- Down Sequencing
        6. 7.10.2.6 Entry and Exit of MCU Only State
        7. 7.10.2.7 Entry and Exit of DDR Retention State
      3. 7.10.3 System Timing
        1. 7.10.3.1 Reset Timing
        2. 7.10.3.2 Safety Signal Timing
        3. 7.10.3.3 Clock Timing
      4. 7.10.4 Clock Specifications
        1. 7.10.4.1 Input and Output Clocks / Oscillators
          1. 7.10.4.1.1 WKUP_OSC0 Internal Oscillator Clock Source
            1. 7.10.4.1.1.1 Load Capacitance
            2. 7.10.4.1.1.2 Shunt Capacitance
          2. 7.10.4.1.2 WKUP_OSC0 LVCMOS Digital Clock Source
          3. 7.10.4.1.3 Auxiliary OSC1 Internal Oscillator Clock Source
            1. 7.10.4.1.3.1 Load Capacitance
            2. 7.10.4.1.3.2 Shunt Capacitance
          4. 7.10.4.1.4 Auxiliary OSC1 LVCMOS Digital Clock Source
          5. 7.10.4.1.5 Auxiliary OSC1 Not Used
          6. 7.10.4.1.6 WKUP_LFOSC0 Internal Oscillator Clock Source
          7. 7.10.4.1.7 WKUP_LFOSC0 Not Used
        2. 7.10.4.2 Output Clocks
        3. 7.10.4.3 PLLs
        4. 7.10.4.4 Device Inputs and Outputs Module Clocks Frequencies
      5. 7.10.5 Peripherals
        1. 7.10.5.1  ATL
          1. 7.10.5.1.1 ATL_PCLK Timing Requirements
          2. 7.10.5.1.2 ATL_AWS[x] Timing Requirements
          3. 7.10.5.1.3 ATL_BWS[x] Timing Requirements
          4. 7.10.5.1.4 ATCLK[x] Switching Characteristics
        2. 7.10.5.2  VPFE
        3. 7.10.5.3  CPSW2G
          1. 7.10.5.3.1 CPSW2G MDIO Interface Timings
          2. 7.10.5.3.2 CPSW2G RMII Timings
            1. 7.10.5.3.2.1 CPSW2G RMII[x]_REF_CLK Timing Requirements – RMII Mode
            2. 7.10.5.3.2.2 CPSW2G RMII[x]_RXD[1:0], RMII[x]_CRS_DV, and RMII[x]_RX_ER Timing Requirements – RMII Mode
            3. 7.10.5.3.2.3 CPSW2G RMII[x]_TXD[1:0], and RMII[x]_TX_EN Switching Characteristics – RMII Mode
          3. 7.10.5.3.3 CPSW2G RGMII Timings
            1. 7.10.5.3.3.1 RGMII[x]_RXC Timing Requirements – RGMII Mode
            2. 7.10.5.3.3.2 CPSW2G Timing Requirements for RGMII[x]_RD[3:0], and RGMII[x]_RCTL – RGMII Mode
            3. 7.10.5.3.3.3 CPSW2G RGMII[x]_TXC Switching Characteristics – RGMII Mode
            4. 7.10.5.3.3.4 RGMII[x]_TD[3:0], and RGMII[x]_TX_CTL Switching Characteristics – RGMII Mode
        4. 7.10.5.4  CPSW9G
          1. 7.10.5.4.1 CPSW9G MDIO Interface Timings
          2. 7.10.5.4.2 CPSW9G RMII Timings
            1. 7.10.5.4.2.1 RMII[x]_REF_CLK Timing Requirements – RMII Mode
            2. 7.10.5.4.2.2 RMII[x]_RXD[1:0], RMII[x]_CRS_DV, and RMII[x]_RX_ER Timing Requirements – RMII Mode
            3. 7.10.5.4.2.3 RMII[x]_TXD[1:0], and RMII[x]_TXEN Switching Characteristics – RMII Mode
          3. 7.10.5.4.3 CPSW9G RGMII Timings
            1. 7.10.5.4.3.1 RGMII[x]_RXC Timing Requirements – RGMII Mode
            2. 7.10.5.4.3.2 RGMII[x]_RD[3:0] and RGMII[x]_RCTL Timing Requirements – RGMII Mode
            3. 7.10.5.4.3.3 RGMII[x]_TXC Switching Characteristics – RGMII Mode
            4. 7.10.5.4.3.4 RGMII[x]_TD[3:0] and RGMII[x]_TX_CTL Switching Characteristics – RGMII Mode
        5. 7.10.5.5  CSI-2
        6. 7.10.5.6  DDRSS
        7. 7.10.5.7  DSS
        8. 7.10.5.8  eCAP
          1. 7.10.5.8.1 Timing Requirements for eCAP
          2. 7.10.5.8.2 Switching Characteristics for eCAP
        9. 7.10.5.9  EPWM
          1. 7.10.5.9.1 Timing Requirements for eHRPWM
          2. 7.10.5.9.2 Switching Characteristics for eHRPWM
        10. 7.10.5.10 eQEP
          1. 7.10.5.10.1 Timing Requirements for eQEP
          2. 7.10.5.10.2 Switching Characteristics for eQEP
        11. 7.10.5.11 GPIO
          1. 7.10.5.11.1 GPIO Timing Requirements
          2. 7.10.5.11.2 GPIO Switching Characteristics
        12. 7.10.5.12 GPMC
          1. 7.10.5.12.1 GPMC and NOR Flash — Synchronous Mode
            1. 7.10.5.12.1.1 GPMC and NOR Flash Timing Requirements — Synchronous Mode
            2. 7.10.5.12.1.2 GPMC and NOR Flash Switching Characteristics – Synchronous Mode
          2. 7.10.5.12.2 GPMC and NOR Flash — Asynchronous Mode
            1. 7.10.5.12.2.1 GPMC and NOR Flash Timing Requirements – Asynchronous Mode
            2. 7.10.5.12.2.2 GPMC and NOR Flash Switching Characteristics – Asynchronous Mode
          3. 7.10.5.12.3 GPMC and NAND Flash — Asynchronous Mode
            1. 7.10.5.12.3.1 GPMC and NAND Flash Timing Requirements – Asynchronous Mode
            2. 7.10.5.12.3.2 GPMC and NAND Flash Switching Characteristics – Asynchronous Mode
        13. 7.10.5.13 HyperBus
          1. 7.10.5.13.1 Timing Requirements for HyperBus
          2. 7.10.5.13.2 HyperBus 166 MHz Switching Characteristics
          3. 7.10.5.13.3 HyperBus 100 MHz Switching Characteristics
        14. 7.10.5.14 I2C
        15. 7.10.5.15 I3C
        16. 7.10.5.16 MCAN
        17. 7.10.5.17 MCASP
        18. 7.10.5.18 MCSPI
          1. 7.10.5.18.1 MCSPI — Master Mode
          2. 7.10.5.18.2 MCSPI — Slave Mode
        19. 7.10.5.19 MMCSD
          1. 7.10.5.19.1 MMC0 - eMMC Interface
            1. 7.10.5.19.1.1 Legacy SDR Mode
            2. 7.10.5.19.1.2 High Speed SDR Mode
            3. 7.10.5.19.1.3 High Speed DDR Mode
            4. 7.10.5.19.1.4 HS200 Mode
          2. 7.10.5.19.2 MMC1/2 - SD/SDIO Interface
            1. 7.10.5.19.2.1 Default Speed Mode
            2. 7.10.5.19.2.2 High Speed Mode
            3. 7.10.5.19.2.3 UHS–I SDR12 Mode
            4. 7.10.5.19.2.4 UHS–I SDR25 Mode
            5. 7.10.5.19.2.5 UHS–I SDR50 Mode
            6. 7.10.5.19.2.6 UHS–I DDR50 Mode
        20. 7.10.5.20 CPTS
          1. 7.10.5.20.1 CPTS Timing Requirements
          2. 7.10.5.20.2 CPTS Switching Characteristics
        21. 7.10.5.21 OSPI
          1. 7.10.5.21.1 OSPI With Data Training
            1. 7.10.5.21.1.1 OSPI Switching Characteristics – Data Training
          2. 7.10.5.21.2 OSPI Without Data Training
            1. 7.10.5.21.2.1 OSPI Switching Characteristics – DDR Mode
            2. 7.10.5.21.2.2 OSPI Switching Characteristics – SDR Mode
            3. 7.10.5.21.2.3 OSPI Timing Requirements – DDR Mode
            4. 7.10.5.21.2.4 OSPI Timing Requirements – SDR Mode
        22. 7.10.5.22 OLDI
          1. 7.10.5.22.1 OLDI Switching Characteristics
        23. 7.10.5.23 PCIE
        24. 7.10.5.24 Timers
          1. 7.10.5.24.1 Timing Requirements for Timers
          2. 7.10.5.24.2 Switching Characteristics for Timers
        25. 7.10.5.25 UART
          1. 7.10.5.25.1 Timing Requirements for UART
          2. 7.10.5.25.2 UART Switching Characteristics
        26. 7.10.5.26 USB
      6. 7.10.6 Emulation and Debug
        1. 7.10.6.1 Trace
        2. 7.10.6.2 JTAG
          1. 7.10.6.2.1 JTAG Electrical Data and Timing
            1. 7.10.6.2.1.1 JTAG Timing Requirements
            2. 7.10.6.2.1.2 JTAG Switching Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Processor Subsystems
      1. 8.2.1 Arm Cortex-A72
      2. 8.2.2 Arm Cortex-R5F
      3. 8.2.3 DSP C71x
      4. 8.2.4 DSP C66x
    3. 8.3 Accelerators and Coprocessors
      1. 8.3.1 GPU
      2. 8.3.2 D5520MP2
      3. 8.3.3 VXE384MP2
    4. 8.4 Other Subsystems
      1. 8.4.1 MSMC
      2. 8.4.2 NAVSS
        1. 8.4.2.1 NAVSS0
        2. 8.4.2.2 MCU_NAVSS
        3. 8.4.2.3
      3. 8.4.3 PDMA Controller
      4. 8.4.4 Peripherals
        1. 8.4.4.1  ADC
        2. 8.4.4.2  ATL
        3. 8.4.4.3  CSI
          1. 8.4.4.3.1 Camera Streaming Interface Receiver (CSI_RX_IF) and MIPI DPHY Receiver (DPHY_RX)
          2. 8.4.4.3.2 Camera Streaming Interface Transmitter (CSI_TX_IF)
        4. 8.4.4.4  CPSW2G
        5. 8.4.4.5  CPSW9G
        6. 8.4.4.6  DCC
        7. 8.4.4.7  DDRSS
        8. 8.4.4.8  DSS
          1. 8.4.4.8.1 DSI
          2. 8.4.4.8.2 eDP
        9. 8.4.4.9  VPFE
        10. 8.4.4.10 eCAP
        11. 8.4.4.11 EPWM
        12. 8.4.4.12 ELM
        13. 8.4.4.13 ESM
        14. 8.4.4.14 eQEP
        15. 8.4.4.15 GPIO
        16. 8.4.4.16 GPMC
        17. 8.4.4.17 Hyperbus
        18. 8.4.4.18 I2C
        19. 8.4.4.19 I3C
        20. 8.4.4.20 MCAN
        21. 8.4.4.21 MCASP
        22. 8.4.4.22 MCRC Controller
        23. 8.4.4.23 MCSPI
        24. 8.4.4.24 MMC/SD
        25. 8.4.4.25 OSPI
        26. 8.4.4.26 PCIE
        27. 8.4.4.27 SerDes
        28. 8.4.4.28 WWDT
        29. 8.4.4.29 Timers
        30. 8.4.4.30 UART
        31. 8.4.4.31 USB
        32. 8.4.4.32 UFS
  9. Applications and Implementation
    1. 9.1 Power Supply Mapping
    2. 9.2 Device Connection and Layout Fundamentals
      1. 9.2.1 Power Supply Decoupling and Bulk Capacitors
        1. 9.2.1.1 Power Distribution Network Implementation Guidance
      2. 9.2.2 External Oscillator
      3. 9.2.3 JTAG and EMU
      4. 9.2.4 Reset
      5. 9.2.5 Unused Pins
      6. 9.2.6 Hardware Design Guide for AM752x/DRA829/TDA4VM Devices
    3. 9.3 Peripheral- and Interface-Specific Design Information
      1. 9.3.1 LPDDR4 Board Design and Layout Guidelines
      2. 9.3.2 OSPI and QSPI Board Design and Layout Guidelines
        1. 9.3.2.1 No Loopback and Internal Pad Loopback
        2. 9.3.2.2 External Board Loopback
        3. 9.3.2.3 DQS (only available in Octal Flash devices)
      3. 9.3.3 SERDES REFCLK Design Guidelines
      4. 9.3.4 USB VBUS Design Guidelines
      5. 9.3.5 System Power Supply Monitor Design Guidelines
      6. 9.3.6 High Speed Differential Signal Routing Guidance
      7. 9.3.7 External Capacitors
      8. 9.3.8 Thermal Solution Guidance
  10. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
      1. 10.1.1 Standard Package Symbolization
      2. 10.1.2 Device Naming Convention
    2. 10.2 Tools and Software
    3. 10.3 Documentation Support
    4. 10.4 Support Resources
    5. 10.5 Trademarks
    6. 10.6 Glossary
  11. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Packaging Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ(パッケージ|ピン)
  • ALF|827
サーマルパッド・メカニカル・データ
発注情報

WKUP Domain

Table 6-9 GPIO0 Signal Descriptions
SIGNAL NAME [1]DESCRIPTION [2]PIN TYPE [3]BALL [4]
WKUP_GPIO0_0General Purpose Input/OutputIOF26
WKUP_GPIO0_1General Purpose Input/OutputIOF25
WKUP_GPIO0_2General Purpose Input/OutputIOF28
WKUP_GPIO0_3General Purpose Input/OutputIOF27
WKUP_GPIO0_4General Purpose Input/OutputIOG25
WKUP_GPIO0_5General Purpose Input/OutputIOG24
WKUP_GPIO0_6General Purpose Input/OutputIOF29
WKUP_GPIO0_7General Purpose Input/OutputIOG28
WKUP_GPIO0_8General Purpose Input/OutputIOG27
WKUP_GPIO0_9General Purpose Input/OutputIOG26
WKUP_GPIO0_10General Purpose Input/OutputIOH26
WKUP_GPIO0_11General Purpose Input/OutputIOH27
WKUP_GPIO0_12General Purpose Input/OutputIOG29
WKUP_GPIO0_13General Purpose Input/OutputIOH28
WKUP_GPIO0_14General Purpose Input/OutputIOH29
WKUP_GPIO0_15General Purpose Input/OutputIOJ27
WKUP_GPIO0_16General Purpose Input/OutputIOE20
WKUP_GPIO0_17General Purpose Input/OutputIOC21
WKUP_GPIO0_18General Purpose Input/OutputIOD21
WKUP_GPIO0_19General Purpose Input/OutputIOD20
WKUP_GPIO0_20General Purpose Input/OutputIOG19
WKUP_GPIO0_21General Purpose Input/OutputIOG20
WKUP_GPIO0_22General Purpose Input/OutputIOF20
WKUP_GPIO0_23General Purpose Input/OutputIOF21
WKUP_GPIO0_24General Purpose Input/OutputIOE21
WKUP_GPIO0_25General Purpose Input/OutputIOB22
WKUP_GPIO0_26General Purpose Input/OutputIOG21
WKUP_GPIO0_27General Purpose Input/OutputIOF19
WKUP_GPIO0_28General Purpose Input/OutputIOE19
WKUP_GPIO0_29General Purpose Input/OutputIOF22
WKUP_GPIO0_30General Purpose Input/OutputIOA23
WKUP_GPIO0_31General Purpose Input/OutputIOB23
WKUP_GPIO0_32General Purpose Input/OutputIOD22
WKUP_GPIO0_33General Purpose Input/OutputIOG22
WKUP_GPIO0_34General Purpose Input/OutputIOD23
WKUP_GPIO0_35General Purpose Input/OutputIOC23
WKUP_GPIO0_36General Purpose Input/OutputIOC22
WKUP_GPIO0_37General Purpose Input/OutputIOE22
WKUP_GPIO0_38General Purpose Input/OutputIOB27
WKUP_GPIO0_39General Purpose Input/OutputIOC25
WKUP_GPIO0_40General Purpose Input/OutputIOA28
WKUP_GPIO0_41General Purpose Input/OutputIOA27
WKUP_GPIO0_42General Purpose Input/OutputIOA26
WKUP_GPIO0_43General Purpose Input/OutputIOB25
WKUP_GPIO0_44General Purpose Input/OutputIOB26
WKUP_GPIO0_45General Purpose Input/OutputIOC24
WKUP_GPIO0_46General Purpose Input/OutputIOA25
WKUP_GPIO0_47General Purpose Input/OutputIOD24
WKUP_GPIO0_48General Purpose Input/OutputIOA24
WKUP_GPIO0_49General Purpose Input/OutputIOB24
WKUP_GPIO0_50General Purpose Input/OutputIOE23
WKUP_GPIO0_51General Purpose Input/OutputIOF23
WKUP_GPIO0_52General Purpose Input/OutputIOE27
WKUP_GPIO0_53General Purpose Input/OutputIOE24
WKUP_GPIO0_54General Purpose Input/OutputIOE28
WKUP_GPIO0_55General Purpose Input/OutputIOE25
WKUP_GPIO0_56General Purpose Input/OutputIOJ29
WKUP_GPIO0_57General Purpose Input/OutputIOJ28
WKUP_GPIO0_58General Purpose Input/OutputIOD29
WKUP_GPIO0_59General Purpose Input/OutputIOC29
WKUP_GPIO0_60General Purpose Input/OutputIOD26
WKUP_GPIO0_61General Purpose Input/OutputIOD25
WKUP_GPIO0_62General Purpose Input/OutputIOJ25
WKUP_GPIO0_63General Purpose Input/OutputIOH24
WKUP_GPIO0_64General Purpose Input/OutputIOJ26
WKUP_GPIO0_65General Purpose Input/OutputIOH25
WKUP_GPIO0_66General Purpose Input/OutputIOE26
WKUP_GPIO0_67General Purpose Input/OutputIOG23