JAJSCX0C October   2015  – November 2018 DRV8885

PRODUCTION DATA.  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
    1.     Device Images
      1.      概略回路図
      2.      マイクロステッピング電流の波形
  4. 4 改訂履歴
  5. 5 概要（続き）
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Indexer Timing Requirements
    7. 7.7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Stepper Motor Driver Current Ratings
        1. 8.3.1.1 Peak Current Rating
        2. 8.3.1.2 RMS Current Rating
        3. 8.3.1.3 Full-Scale Current Rating
      2. 8.3.2  PWM Motor Drivers
      3. 8.3.3  Microstepping Indexer
      4. 8.3.4  Current Regulation
      5. 8.3.5  Controlling RREF With an MCU
      6. 8.3.6  Decay Modes
        1. 8.3.6.1 Mode 1: Slow Decay for Increasing and Decreasing Current
        2. 8.3.6.2 Mode 2: Slow Decay for Increasing Current, Mixed Decay for Decreasing Current
        3. 8.3.6.3 Mode 3: Mixed Decay for Increasing and Decreasing Current
      7. 8.3.7  Blanking Time
      8. 8.3.8  Charge Pump
      9. 8.3.9  LDO Voltage Regulator
      10. 8.3.10 Logic and Multi-Level Pin Diagrams
      11. 8.3.11 Protection Circuits
        1. 8.3.11.1 VM Undervoltage Lockout (UVLO)
        2. 8.3.11.2 VCP Undervoltage Lockout (CPUV)
        3. 8.3.11.3 Overcurrent Protection (OCP)
        4. 8.3.11.4 Thermal Shutdown (TSD)
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Stepper Motor Speed
        2. 9.2.2.2 Current Regulation
        3. 9.2.2.3 Decay Modes
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
    1. 10.1 Bulk Capacitance
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12デバイスおよびドキュメントのサポート
    1. 12.1 ドキュメントのサポート
      1. 12.1.1 関連資料
    2. 12.2 ドキュメントの更新通知を受け取る方法
    3. 12.3 コミュニティ・リソース
    4. 12.4 商標
    5. 12.5 静電気放電に関する注意事項
    6. 12.6 Glossary
  13. 13メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

8.3.6 Decay Modes

The DRV8885 decay mode is selected by setting the quad-level DECAY pin to the voltage range in Table 6.

Table 6. Decay Mode Settings

DECAY INCREASING STEPS DECREASING STEPS
100 mV
Can be tied to ground		 Slow decay Mixed decay: 30% fast
300 mV, 15 kΩ to GND Mixed decay: 30% fast Mixed decay: 30% fast
1.0 V, 45 kΩ to GND Mixed decay: 60% fast Mixed decay: 60% fast
2.9 V
Can be tied to DVDD		 Slow decay Slow decay

Increasing and decreasing current are defined in the chart below. For the Slow/Mixed decay mode, the decay mode is set as slow during increasing current steps and mixed decay during decreasing current steps. In full step mode the decreasing steps decay mode is always used.

DRV8885 inc_and_dec_curr_lvsd39.gifFigure 17. Definition of Increasing and Decreasing Steps