SNOS751E April   2000  – September 2014 LM6132 , LM6134

PRODUCTION DATA.  

  1. 1Features
  2. 2Applications
  3. 3Description
  4. 4Revision History
  5. 5Pin Configuration and Functions
  6. 6Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  Handling Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information, 8-Pin
    5. 6.5  Thermal Information, 14-Pin
    6. 6.6  5.0V DC Electrical Characteristics
    7. 6.7  5.0V AC Electrical Characteristics
    8. 6.8  2.7V DC Electrical Characteristics
    9. 6.9  2.7V AC Electrical Characteristics
    10. 6.10 24V DC Electrical Characteristics
    11. 6.11 24V AC Electrical Characteristics
    12. 6.12 Typical Performance Characteristics
  7. 7Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Enhanced Slew Rate
      1. 7.2.1 Driving Capacitive Loads
    3. 7.3 Typical Applications
      1. 7.3.1 Three Op Amp Instrumentation Amp with Rail-to-Rail Input and Output
      2. 7.3.2 Flat Panel Display Buffering
  8. 8Device and Documentation Support
    1. 8.1 Related Links
    2. 8.2 Trademarks
    3. 8.3 Electrostatic Discharge Caution
    4. 8.4 Glossary
  9. 9Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ

1 Features

  • (For 5V Supply, Typ Unless Noted)
  • Rail-to-Rail Input CMVR −0.25 V to 5.25 V
  • Rail-to-Rail Output Swing 0.01V to 4.99V
  • High Gain-Bandwidth, 10 MHz at 20 kHz
  • Slew Rate 12 V/μs
  • Low Supply Current 360 μA/Amp
  • Wide Supply Range 2.7 V to over 24 V
  • CMRR 100 dB
  • Gain 100 dB with RL = 10 k
  • PSRR 82 dB

2 Applications

  • Battery Operated Instrumentation
  • Instrumentation Amplifiers
  • Portable Scanners
  • Wireless Communications
  • Flat Panel Display Driver

3 Description

The LM6132/34 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 μA/amp supply current, the 10 MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.

The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.

Operating on supplies from 2.7 V to over 24 V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.

Device Information(1)

PART NUMBER PACKAGE BODY SIZE (NOM)
LM6132 SOIC (8) 4.90 mm x 3.91 mm
LM6132 PDIP (8) 9.81 mm x 6.35 mm
LM6134 SOIC (14) 8.65 mm x 3.91 mm
LM6134 PDIP (14) 19.177 mm x 6.35 mm
  1. For all available packages, see the orderable addendum at the end of the datasheet.


Supply Current vs. Supply Voltage

01234903.png

Offset Voltage vs. Supply Voltage

01234905.png