JAJSFO4B August   2017  – December 2018 OPA2810

PRODUCTION DATA.  

  1. 特長
  2. アプリケーション
    1.     マルチチャネル・センサ・インターフェイス
  3. 概要
    1.     高調波歪みと周波数との関係
  4. 改訂履歴
  5. Pin Configuration and Functions
    1.     Pin Functions
  6. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: 10 V
    6. 6.6  Electrical Characteristics: 24 V
    7. 6.7  Electrical Characteristics: 5 V
    8. 6.8  Typical Characteristics: VS = 10 V
    9. 6.9  Typical Characteristics: VS = 24 V
    10. 6.10 Typical Characteristics: VS = 5 V
    11. 6.11 Typical Characteristics: ±2.375 V to ±12 V Split Supply
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
      1. 7.2.1 ESD Protection
    3. 7.3 Feature Description
      1. 7.3.1 OPA2810 Comparison
    4. 7.4 Device Functional Modes
      1. 7.4.1 Split-Supply Operation (±2.375 V to ±13.5 V)
      2. 7.4.2 Single-Supply Operation (4.75 V to 27 V)
  8. Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Selection of Feedback Resistors
      2. 8.1.2 Noise Analysis and the Effect of Resistor Elements on Total Noise
    2. 8.2 Typical Applications
      1. 8.2.1 Transimpedance Amplifier
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
      2. 8.2.2 Multichannel Sensor Interface
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Thermal Considerations
    2. 10.2 Layout Example
  11. 11デバイスおよびドキュメントのサポート
    1. 11.1 ドキュメントのサポート
      1. 11.1.1 関連資料
    2. 11.2 ドキュメントの更新通知を受け取る方法
    3. 11.3 コミュニティ・リソース
    4. 11.4 商標
    5. 11.5 静電気放電に関する注意事項
    6. 11.6 Glossary
  12. 12メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

Typical Characteristics: VS = 10 V

at VS+ = 5 V, VS– = –5 V, RL = 1 kΩ, input and output are biased to midsupply, and TA ≈ 25°C. For AC specifications, VO = 2 VPP, G = 2 V/V, RF = 1 kΩ, and CL = 4.7 pF (unless otherwise noted)
OPA2810 D041_SBOS789_SSBW_Vs_Gain_10V.gif
See Figure 65 and Figure 66, VO = 20 mVPP
Figure 1. Small-Signal Frequency Response vs Gain
OPA2810 D043_SBOS789_SSBW_Vs_Rload_gain2_10V.gif
See Figure 65, VO = 20 mVPP, Gain = 2 V/V
Figure 3. Small-Signal Frequency Response vs Output Load
OPA2810 D045_SBOS789_SSBW_Vs_Cload_gain2_10V.gif
See Figure 65and Figure 63, VO = 20 mVPP, Gain = 2 V/V
Figure 5. Small-Signal Frequency Response vs CL
OPA2810 D047_SBOS789_LSBW_Vs_Vout_gain2_10V.gif
See Figure 65, Gain = 2 V/V
Figure 7. Large-Signal Frequency Response vs Output Voltage
OPA2810 D048_SBOS789_HD_Vs_Freq_RL_gain2_10V.gif
See Figure 65, Gain = 2 V/V
Figure 9. Harmonic Distortion vs Frequency
OPA2810 D050_SBOS789_HD_Vs_Freq_Gain_10V.gif
See Figure 65 and Figure 66, RF = 0 Ω for Gain = 1 V/V
Figure 11. Harmonic Distortion vs Gain
OPA2810 D053_SBOS789_OvershootUndershoot_Vs_Cout_10V.gif
See Figure 65, Gain = 1 V/V, RF = 0 Ω
Figure 13. Overshoot and Undershoot vs CL
OPA2810 D055_SBOS789_Output_Overdrive_5V.gif
See Figure 66, Gain = -1 V/V
Figure 15. Output Overdrive Recovery
OPA2810 D057_SBOS789_SCCurrent_vs_temp_10V.gif
Output saturated and then short-circuited, Io measured after
TDelay = 5 msec
Figure 17. Output Short-Circuit Current vs Ambient Temperature
OPA2810 D042_SBOS789_SSBW_Vs_Rload_gain1_10V.gif
See Figure 65, VO = 20 mVPP, Gain = 1 V/V, RF = 0 Ω
Figure 2. Small-Signal Frequency Response vs Output Load
OPA2810 D044_SBOS789_SSBW_Vs_Cload_gain1_10V.gif
See Figure 65 and Figure 63,
VO = 20 mVPP, Gain = 1 V/V, RF = 0 Ω
Figure 4. Small-Signal Frequency Response vs CL
OPA2810 D046_SBOS789_LSBW_Vs_Vout_gain1_10V.gif
See Figure 65, Gain = 1 V/V, RF = 0 Ω
Figure 6. Large-Signal Frequency Response vs Output Voltage
OPA2810 D051_SBOS789_RespFlat_Vs_Gain_10V.gif
See Figure 65 and Figure 66, VO = 20 mVPP
Figure 8. Small-Signal Response Flatness vs Gain
OPA2810 D049_SBOS789_HD_Vs_Freq_RL_gain-1_10V.gif
See Figure 66, Gain = –1 V/V
Figure 10. Harmonic Distortion vs Frequency
OPA2810 D052_SBOS789_Small_Signal_Transient_200mVpp_10V.gif
See Figure 65, Gain = 1 V/V, RF = 0 Ω
Figure 12. Small-Signal Transient Response
OPA2810 D054_SBOS789_Input_Overdrive_10V.gif
See Figure 65, Gain = 1 V/V, RF = 0 Ω
Figure 14. Input Overdrive Recovery
OPA2810 D056_SBOS789_Claw_10V.gif
Figure 16. Output Voltage vs Load Current
OPA2810 D058_SBOS789_Vos_vs_Vcm.gif
Measured for 34 units
Figure 18. Input Offset Voltage vs Input Common-Mode Voltage