SLES270A November   2012  – April 2015 TAS5548

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics
    6. 6.6  Dynamic Performance
    7. 6.7  SRC Performance
    8. 6.8  Timing I2C Serial Control Port Operation
    9. 6.9  Reset Timing (RESET)
    10. 6.10 Power-Down (PDN) Timing
    11. 6.11 Back-End Error (BKND_ERR)
    12. 6.12 Mute Timing (MUTE)
    13. 6.13 Headphone Select (HP_SEL)
    14. 6.14 Switching Characteristics - Clock Signals
    15. 6.15 Switching Characteristics - Serial Audio Port
    16. 6.16 Volume Control
    17. 6.17 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Serial Audio Interface Control and Timing
        1. 7.3.1.1 Input I2S Timing
        2. 7.3.1.2 Left-Justified Timing
        3. 7.3.1.3 Right-Justified Timing
      2. 7.3.2 OUTPUT Serial Audio Output
      3. 7.3.3 I2S Master Mode
      4. 7.3.4 LRCKO and SCLKO
      5. 7.3.5 PWM Features
        1. 7.3.5.1 DC Blocking (High-Pass Filter Enable/Disable)
        2. 7.3.5.2 AM Interference Avoidance
      6. 7.3.6 TAS5548 Controls and Status
        1. 7.3.6.1 I2C Status Registers
          1. 7.3.6.1.1 General Status Register (0x01)
          2. 7.3.6.1.2 Error Status Register (0x02)
        2. 7.3.6.2 TAS5548 Pin Controls
          1. 7.3.6.2.1 Reset (RESET)
          2. 7.3.6.2.2 Power Down (PDN)
          3. 7.3.6.2.3 Back-End Error (BKND_ERR)
            1. 7.3.6.2.3.1 BKND_ERR and VALID
          4. 7.3.6.2.4 Speaker/Headphone Selector (HP_SEL)
          5. 7.3.6.2.5 Mute (MUTE)
          6. 7.3.6.2.6 Power-Supply Volume Control (PSVC)
    4. 7.4 Device Functional Modes
      1. 7.4.1  Power Supply
      2. 7.4.2  Clock, PLL, and Serial Data Interface
      3. 7.4.3  Serial Audio Interface
      4. 7.4.4  I 2C Serial-Control Interface
      5. 7.4.5  Device Control
      6. 7.4.6  Energy Manager
      7. 7.4.7  Digital Audio Processor (DAP)
        1. 7.4.7.1 TAS5548 Audio-Processing Configurations
        2. 7.4.7.2 TAS5548 Audio-Processing Feature Sets
      8. 7.4.8  Pulse Width Modulation Schemes
      9. 7.4.9  TAS5548 DAP Architecture Diagrams
      10. 7.4.10 I 2C Coefficient Number Formats
        1. 7.4.10.1 Digital Audio Processor (DAP) Arithmetic Unit
        2. 7.4.10.2 28-Bit 5.23 Number Format
        3. 7.4.10.3 TAS5548 Audio Processing
      11. 7.4.11 Input Crossbar Mixer
      12. 7.4.12 Biquad Filters
      13. 7.4.13 Bass and Treble Controls
      14. 7.4.14 Volume, Automute, and Mute
      15. 7.4.15 Loudness Compensation
        1. 7.4.15.1 Loudness Example
      16. 7.4.16 Dynamic Range Control (DRC)
        1. 7.4.16.1 DRC Implementation
        2. 7.4.16.2 Compression/Expansion Coefficient Computation Engine Parameters
          1. 7.4.16.2.1 Threshold Parameter Computation
          2. 7.4.16.2.2 Offset Parameter Computation
          3. 7.4.16.2.3 Slope Parameter Computation
      17. 7.4.17 THD Manager
      18. 7.4.18 Downmix Algorithm and I2S Out
      19. 7.4.19 Stereo Downmixes/(or Fold-Downs)
        1. 7.4.19.1 Left Total/Right Total (Lt/Rt)
        2. 7.4.19.2 Left Only/Right Only (Lo/Ro)
      20. 7.4.20 Output Mixer
      21. 7.4.21 Device Configuration Controls
        1. 7.4.21.1 Channel Configuration
        2. 7.4.21.2 Headphone Configuration Registers
        3. 7.4.21.3 Audio System Configurations
          1. 7.4.21.3.1 Using Line Outputs in 6-Channel Configurations
        4. 7.4.21.4 Recovery from Clock Error
        5. 7.4.21.5 Power-Supply Volume-Control Enable
        6. 7.4.21.6 Volume and Mute Update Rate
        7. 7.4.21.7 Modulation Index Limit
      22. 7.4.22 Master Clock and Serial Data Rate Controls
        1. 7.4.22.1 192kHz Native Processing Mode
        2. 7.4.22.2 PLL Operation
    5. 7.5 Programming
      1. 7.5.1 I2C Serial-Control Interface (Slave Addresses 0x36)
        1. 7.5.1.1 General I2C Operation
        2. 7.5.1.2 Single- and Multiple-Byte Transfers
        3. 7.5.1.3 Single-Byte Write
        4. 7.5.1.4 Multiple-Byte Write
        5. 7.5.1.5 Incremental Multiple-Byte Write
        6. 7.5.1.6 Single-Byte Read
        7. 7.5.1.7 Multiple-Byte Read
    6. 7.6 Register Maps
      1. 7.6.1 Serial-Control I2C Register Summary
      2. 7.6.2 Serial-Control Interface Register Definitions
        1. 7.6.2.1  General Status Register 0 (0x01)
        2. 7.6.2.2  Error Status Register (0x02)
        3. 7.6.2.3  System Control Register 1 (0x03)
        4. 7.6.2.4  System Control Register 2 (0x04)
        5. 7.6.2.5  Channel Configuration Control Registers (0x05-0x0C)
        6. 7.6.2.6  Headphone Configuration Control Register (0x0D)
        7. 7.6.2.7  Serial Data Interface Control Register (0x0E)
        8. 7.6.2.8  Soft Mute Register (0x0F)
        9. 7.6.2.9  Energy Manager Status Register (0x10)
        10. 7.6.2.10 Automute Control Register (0x14)
        11. 7.6.2.11 Output Automute PWM Threshold and Back-End Reset Period Register (0x15)
        12. 7.6.2.12 Modulation Index Limit Register (0x16, 0x17, 0x18, 0x19)
        13. 7.6.2.13 AD Mode - 8 Interchannel Channel Delay and Global Offset Registers (0x1B to 0x23)
        14. 7.6.2.14 Special Low Z and Mid Z Ramp/Stop Period (0x24)
        15. 7.6.2.15 PWM and EMO Control Register (0x25)
        16. 7.6.2.16 Individual Channel Shutdown (0x27)
        17. 7.6.2.17 Input Mux Registers (0x30, 0x31, 0x32, 0x33)
        18. 7.6.2.18 PWM Mux Registers (0x34, 0x35, 0x36, 0x37)
        19. 7.6.2.19 BD Mode and Ternary - 8 Interchannel Channel Delay (0x38 to 0x3F)
        20. 7.6.2.20 Input Mixer Registers, Channels 1-8 (0x41-0x48)
        21. 7.6.2.21 Bass Mixer Registers (0x49-0x50)
        22. 7.6.2.22 Biquad Filter Register (0x51-0x88)
        23. 7.6.2.23 Bass and Treble Register, Channels 1-8 (0x89-0x90)
        24. 7.6.2.24 Loudness Registers (0x91-0x95)
        25. 7.6.2.25 DRC1 Control Register CH1-7 (0x96) - Write
        26. 7.6.2.26 DRC2 Control Register CH8 (0x97) - Write Register
        27. 7.6.2.27 DRC1 Data Registers (0x98-0x9C)
        28. 7.6.2.28 DRC2 Data Registers (0x9D-0xA1)
        29. 7.6.2.29 DRC Bypass Registers (0xA2-0xA9)
        30. 7.6.2.30 Output Select and Mix Registers 8x2 (0x-0xAF)
        31. 7.6.2.31 8×3 Output Mixer Registers (0xB0-0xB1)
        32. 7.6.2.32 ASRC Registers (0xC3-C5)
        33. 7.6.2.33 Auto Mute Behavior (0xCC)
        34. 7.6.2.34 PSVC Volume Biquad Register (0xCF)
        35. 7.6.2.35 Volume, Treble, and Bass Slew Rates Register (0xD0)
        36. 7.6.2.36 Volume Registers (0xD1-0xD9)
        37. 7.6.2.37 Bass Filter Set Register (0xDA)
        38. 7.6.2.38 Bass Filter Index Register (0xDB)
        39. 7.6.2.39 Treble Filter Set Register (0xDC)
        40. 7.6.2.40 Treble Filter Index (0xDD)
        41. 7.6.2.41 AM Mode Register (0xDE)
        42. 7.6.2.42 PSVC Range Register (0xDF)
        43. 7.6.2.43 General Control Register (0xE0)
        44. 7.6.2.44 96kHz Dolby Downmix Coefficients (0xE3 to 0xE8)
        45. 7.6.2.45 THD Manager Configuration (0xE9 and 0xEA)
        46. 7.6.2.46 SDIN5 Input Mixer (0xEC-0xF3)
        47. 7.6.2.47 192kHZ Process Flow Output Mixer (0xF4-0xF7)
        48. 7.6.2.48 192kHz Dolby Downmix Coefficients (0xFB and 0xFC)
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 TAS5558 DVD Receiver Application
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
        3. 8.2.1.3 Application Curves
      2. 8.2.2 Serial Port Master/Slave Configurations
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Detailed Design Procedure
        3. 8.2.2.3 Application Curves
      3. 8.2.3 Device System Diagrams
        1. 8.2.3.1 Design Requirements
        2. 8.2.3.2 Detailed Design Procedure
        3. 8.2.3.3 Application Curves
    3. 8.3 Do’s and Don’ts
      1. 8.3.1 Frequency Scaling AM Avoidance
    4. 8.4 Initialization Set Up
      1. 8.4.1 Startup Register Writes to get Audio Functioning
  9. Power Supply Recommendations
    1. 9.1 Power Supply
    2. 9.2 Energy Manager
    3. 9.3 Programming Energy Manager
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Trademarks
    3. 11.3 Electrostatic Discharge Caution
    4. 11.4 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

12 Mechanical, Packaging, and Orderable Information

The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation.