JAJSIF7J February   2019  – August 2021 TDA4VM , TDA4VM-Q1

PRODUCTION DATA  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
    1. 3.1 機能ブロック図
  4. 4 Revision History
  5. 5 Device Comparison
    1. 5.1 Related Products
  6. 6 Terminal Configuration and Functions
    1. 6.1 Pin Diagram
    2. 6.2 Pin Attributes
    3. 6.3 Signal Descriptions
      1. 6.3.1  ADC
        1. 6.3.1.1 MCU Domain
      2. 6.3.2  DDRSS
        1. 6.3.2.1 MAIN Domain
      3. 6.3.3  GPIO
        1. 6.3.3.1 MAIN Domain
        2. 6.3.3.2 WKUP Domain
      4. 6.3.4  I2C
        1. 6.3.4.1 MAIN Domain
        2. 6.3.4.2 MCU Domain
        3. 6.3.4.3 WKUP Domain
      5. 6.3.5  I3C
        1. 6.3.5.1 MAIN Domain
        2. 6.3.5.2 MCU Domain
      6. 6.3.6  MCAN
        1. 6.3.6.1 MAIN Domain
        2. 6.3.6.2 MCU Domain
      7. 6.3.7  MCSPI
        1. 6.3.7.1 MAIN Domain
        2. 6.3.7.2 MCU Domain
      8. 6.3.8  UART
        1. 6.3.8.1 MAIN Domain
        2. 6.3.8.2 MCU Domain
        3. 6.3.8.3 WKUP Domain
      9. 6.3.9  MDIO
        1. 6.3.9.1 MCU Domain
      10. 6.3.10 CPSW2G
        1. 6.3.10.1 MCU Domain
      11. 6.3.11 CPSW9G
        1. 6.3.11.1 MAIN Domain
      12. 6.3.12 ECAP
        1. 6.3.12.1 MAIN Domain
      13. 6.3.13 EQEP
        1. 6.3.13.1 MAIN Domain
      14. 6.3.14 EHRPWM
        1. 6.3.14.1 MAIN Domain
      15. 6.3.15 USB
        1. 6.3.15.1 MAIN Domain
      16. 6.3.16 SERDES
        1. 6.3.16.1 MAIN Domain
      17. 6.3.17 OSPI
        1. 6.3.17.1 MCU Domain
      18. 6.3.18 Hyperbus
        1. 6.3.18.1 MCU Domain
      19. 6.3.19 GPMC
        1. 6.3.19.1 MAIN Domain
      20. 6.3.20 MMC
        1. 6.3.20.1 MAIN Domain
      21. 6.3.21 CPTS
        1. 6.3.21.1 MCU Domain
        2. 6.3.21.2 MAIN Domain
      22. 6.3.22 UFS
        1. 6.3.22.1 MAIN Domain
      23. 6.3.23 PRU_ICSSG [Currently Not Supported]
        1. 6.3.23.1 MAIN Domain
      24. 6.3.24 MCASP
        1. 6.3.24.1 MAIN Domain
      25. 6.3.25 DSS
        1. 6.3.25.1 MAIN Domain
      26. 6.3.26 DP
        1. 6.3.26.1 MAIN Domain
      27. 6.3.27 Camera Streaming Interface Receiver (CSI_RX_IF) Subsystem
        1. 6.3.27.1 MAIN Domain
      28. 6.3.28 DSI_TX
        1. 6.3.28.1 MAIN Domain
      29. 6.3.29 VPFE
        1. 6.3.29.1 MAIN Domain
      30. 6.3.30 DMTIMER
        1. 6.3.30.1 MAIN Domain
        2. 6.3.30.2 MCU Domain
      31. 6.3.31 Emulation and Debug
        1. 6.3.31.1 MAIN Domain
      32. 6.3.32 System and Miscellaneous
        1. 6.3.32.1 Boot Mode Configuration
          1. 6.3.32.1.1 MAIN Domain
          2. 6.3.32.1.2 MCU Domain
        2. 6.3.32.2 Clock
          1. 6.3.32.2.1 MAIN Domain
          2. 6.3.32.2.2 WKUP Domain
        3. 6.3.32.3 System
          1. 6.3.32.3.1 MAIN Domain
          2. 6.3.32.3.2 WKUP Domain
        4. 6.3.32.4 EFUSE
      33. 6.3.33 Power Supply
    4. 6.4 Pin Multiplexing
    5. 6.5 Connections for Unused Pins
  7. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Power-On-Hour (POH) Limits
    4. 7.4  Recommended Operating Conditions
    5. 7.5  Operating Performance Points
    6. 7.6  Power Consumption Summary
    7. 7.7  Electrical Characteristics
    8. 7.8  VPP Specifications for One-Time Programmable (OTP) eFuses
      1. 7.8.1 Recommended Operating Conditions for OTP eFuse Programming
      2. 7.8.2 Hardware Requirements
      3. 7.8.3 Programming Sequence
      4. 7.8.4 Impact to Your Hardware Warranty
    9. 7.9  Thermal Resistance Characteristics
      1. 7.9.1 Thermal Resistance Characteristics for ALF Package
    10. 7.10 Timing and Switching Characteristics
      1. 7.10.1 Timing Parameters and Information
      2. 7.10.2 Power Supply Sequencing
        1. 7.10.2.1 Power Supply Slew Rate Requirement
        2. 7.10.2.2 Combined MCU and Main Domains Power-Up Sequencing
        3. 7.10.2.3 Combined MCU and Main Domains Power- Down Sequencing
        4. 7.10.2.4 Isolated MCU and Main Domains Power- Up Sequencing
        5. 7.10.2.5 Isolated MCU and Main Domains, Primary Power- Down Sequencing
        6. 7.10.2.6 Entry and Exit of MCU Only State
        7. 7.10.2.7 Entry and Exit of DDR Retention State
      3. 7.10.3 System Timing
        1. 7.10.3.1 Reset Timing
        2. 7.10.3.2 Safety Signal Timing
        3. 7.10.3.3 Clock Timing
      4. 7.10.4 Clock Specifications
        1. 7.10.4.1 Input and Output Clocks / Oscillators
          1. 7.10.4.1.1 WKUP_OSC0 Internal Oscillator Clock Source
            1. 7.10.4.1.1.1 Load Capacitance
            2. 7.10.4.1.1.2 Shunt Capacitance
          2. 7.10.4.1.2 WKUP_OSC0 LVCMOS Digital Clock Source
          3. 7.10.4.1.3 Auxiliary OSC1 Internal Oscillator Clock Source
            1. 7.10.4.1.3.1 Load Capacitance
            2. 7.10.4.1.3.2 Shunt Capacitance
          4. 7.10.4.1.4 Auxiliary OSC1 LVCMOS Digital Clock Source
          5. 7.10.4.1.5 Auxiliary OSC1 Not Used
          6. 7.10.4.1.6 WKUP_LFOSC0 Internal Oscillator Clock Source
          7. 7.10.4.1.7 WKUP_LFOSC0 Not Used
        2. 7.10.4.2 Output Clocks
        3. 7.10.4.3 PLLs
        4. 7.10.4.4 Module and Peripheral Clocks Frequencies
      5. 7.10.5 Peripherals
        1. 7.10.5.1  ATL
          1. 7.10.5.1.1 ATL_PCLK Timing Requirements
          2. 7.10.5.1.2 ATL_AWS[x] Timing Requirements
          3. 7.10.5.1.3 ATL_BWS[x] Timing Requirements
          4. 7.10.5.1.4 ATCLK[x] Switching Characteristics
        2. 7.10.5.2  VPFE
        3. 7.10.5.3  CPSW2G
          1. 7.10.5.3.1 CPSW2G MDIO Interface Timings
          2. 7.10.5.3.2 CPSW2G RMII Timings
            1. 7.10.5.3.2.1 CPSW2G RMII[x]_REF_CLK Timing Requirements – RMII Mode
            2. 7.10.5.3.2.2 CPSW2G RMII[x]_RXD[1:0], RMII[x]_CRS_DV, and RMII[x]_RX_ER Timing Requirements – RMII Mode
            3. 7.10.5.3.2.3 CPSW2G RMII[x]_TXD[1:0], and RMII[x]_TX_EN Switching Characteristics – RMII Mode
          3. 7.10.5.3.3 CPSW2G RGMII Timings
            1. 7.10.5.3.3.1 RGMII[x]_RXC Timing Requirements – RGMII Mode
            2. 7.10.5.3.3.2 CPSW2G Timing Requirements for RGMII[x]_RD[3:0], and RGMII[x]_RCTL – RGMII Mode
            3. 7.10.5.3.3.3 CPSW2G RGMII[x]_TXC Switching Characteristics – RGMII Mode
            4. 7.10.5.3.3.4 RGMII[x]_TD[3:0], and RGMII[x]_TX_CTL Switching Characteristics – RGMII Mode
        4. 7.10.5.4  CPSW9G
          1. 7.10.5.4.1 CPSW9G MDIO Interface Timings
          2. 7.10.5.4.2 CPSW9G RMII Timings
            1. 7.10.5.4.2.1 RMII[x]_REF_CLK Timing Requirements – RMII Mode
            2. 7.10.5.4.2.2 RMII[x]_RXD[1:0], RMII[x]_CRS_DV, and RMII[x]_RX_ER Timing Requirements – RMII Mode
            3. 7.10.5.4.2.3 RMII[x]_TXD[1:0], and RMII[x]_TXEN Switching Characteristics – RMII Mode
          3. 7.10.5.4.3 CPSW9G RGMII Timings
            1. 7.10.5.4.3.1 RGMII[x]_RXC Timing Requirements – RGMII Mode
            2. 7.10.5.4.3.2 RGMII[x]_RD[3:0] and RGMII[x]_RCTL Timing Requirements – RGMII Mode
            3. 7.10.5.4.3.3 RGMII[x]_TXC Switching Characteristics – RGMII Mode
            4. 7.10.5.4.3.4 RGMII[x]_TD[3:0] and RGMII[x]_TX_CTL Switching Characteristics – RGMII Mode
        5. 7.10.5.5  CSI-2
        6. 7.10.5.6  DDRSS
        7. 7.10.5.7  DSS
        8. 7.10.5.8  eCAP
          1. 7.10.5.8.1 Timing Requirements for eCAP
          2. 7.10.5.8.2 Switching Characteristics for eCAP
        9. 7.10.5.9  EPWM
          1. 7.10.5.9.1 Switching Characteristics for eHRPWM
          2. 7.10.5.9.2 Timing Requirements for eHRPWM
        10. 7.10.5.10 eQEP
          1. 7.10.5.10.1 Timing Requirements for eQEP
          2. 7.10.5.10.2 Switching Characteristics for eQEP
        11. 7.10.5.11 GPIO
          1. 7.10.5.11.1 GPIO Timing Requirements
          2. 7.10.5.11.2 GPIO Switching Characteristics
        12. 7.10.5.12 GPMC
          1. 7.10.5.12.1 GPMC and NOR Flash — Synchronous Mode
            1. 7.10.5.12.1.1 GPMC and NOR Flash Timing Requirements — Synchronous Mode
            2. 7.10.5.12.1.2 GPMC and NOR Flash Switching Characteristics – Synchronous Mode
          2. 7.10.5.12.2 GPMC and NOR Flash — Asynchronous Mode
            1. 7.10.5.12.2.1 GPMC and NOR Flash Timing Requirements – Asynchronous Mode
            2. 7.10.5.12.2.2 GPMC and NOR Flash Switching Characteristics – Asynchronous Mode
          3. 7.10.5.12.3 GPMC and NAND Flash — Asynchronous Mode
            1. 7.10.5.12.3.1 GPMC and NAND Flash Timing Requirements – Asynchronous Mode
            2. 7.10.5.12.3.2 GPMC and NAND Flash Switching Characteristics – Asynchronous Mode
          4. 7.10.5.12.4 GPMC0 IOSET
        13. 7.10.5.13 HyperBus
          1. 7.10.5.13.1 Timing Requirements for HyperBus
          2. 7.10.5.13.2 HyperBus 166 MHz Switching Characteristics
          3. 7.10.5.13.3 HyperBus 100 MHz Switching Characteristics
        14. 7.10.5.14 I2C
        15. 7.10.5.15 I3C
        16. 7.10.5.16 MCAN
        17. 7.10.5.17 MCASP
        18. 7.10.5.18 MCSPI
          1. 7.10.5.18.1 MCSPI — Master Mode
          2. 7.10.5.18.2 MCSPI — Slave Mode
        19. 7.10.5.19 MMCSD
          1. 7.10.5.19.1 MMC0 - eMMC Interface
            1. 7.10.5.19.1.1 Legacy SDR Mode
            2. 7.10.5.19.1.2 High Speed SDR Mode
            3. 7.10.5.19.1.3 High Speed DDR Mode
            4. 7.10.5.19.1.4 HS200 Mode
          2. 7.10.5.19.2 MMC1/2 - SD/SDIO Interface
            1. 7.10.5.19.2.1 Default Speed Mode
            2. 7.10.5.19.2.2 High Speed Mode
            3. 7.10.5.19.2.3 UHS–I SDR12 Mode
            4. 7.10.5.19.2.4 UHS–I SDR25 Mode
            5. 7.10.5.19.2.5 UHS–I SDR50 Mode
            6. 7.10.5.19.2.6 UHS–I DDR50 Mode
            7. 7.10.5.19.2.7 UHS–I SDR104 Mode
        20. 7.10.5.20 CPTS
          1. 7.10.5.20.1 CPTS Timing Requirements
          2. 7.10.5.20.2 CPTS Switching Characteristics
        21. 7.10.5.21 OSPI
          1. 7.10.5.21.1 OSPI With Data Training
            1. 7.10.5.21.1.1 OSPI Switching Characteristics – Data Training
          2. 7.10.5.21.2 OSPI Without Data Training
            1. 7.10.5.21.2.1 OSPI Timing Requirements – SDR Mode
            2. 7.10.5.21.2.2 OSPI Switching Characteristics – SDR Mode
            3. 7.10.5.21.2.3 OSPI Timing Requirements – DDR Mode
            4. 7.10.5.21.2.4 OSPI Switching Characteristics – DDR Mode
        22. 7.10.5.22 OLDI
          1. 7.10.5.22.1 OLDI Switching Characteristics
        23. 7.10.5.23 PCIE
        24. 7.10.5.24 Timers
          1. 7.10.5.24.1 Timing Requirements for Timers
          2. 7.10.5.24.2 Switching Characteristics for Timers
        25. 7.10.5.25 UART
          1. 7.10.5.25.1 Timing Requirements for UART
          2. 7.10.5.25.2 UART Switching Characteristics
        26. 7.10.5.26 USB
      6. 7.10.6 Emulation and Debug
        1. 7.10.6.1 Trace
        2. 7.10.6.2 JTAG
          1. 7.10.6.2.1 JTAG Electrical Data and Timing
            1. 7.10.6.2.1.1 JTAG Timing Requirements
            2. 7.10.6.2.1.2 JTAG Switching Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Processor Subsystems
      1. 8.2.1 Arm Cortex-A72
      2. 8.2.2 Arm Cortex-R5F
      3. 8.2.3 DSP C71x
      4. 8.2.4 DSP C66x
    3. 8.3 Accelerators and Coprocessors
      1. 8.3.1 GPU
      2. 8.3.2 VPAC
      3. 8.3.3 DMPAC
      4. 8.3.4 D5520MP2
      5. 8.3.5 VXE384MP2
    4. 8.4 Other Subsystems
      1. 8.4.1 MSMC
      2. 8.4.2 NAVSS
        1. 8.4.2.1 NAVSS0
        2. 8.4.2.2 MCU_NAVSS
      3. 8.4.3 PDMA Controller
      4. 8.4.4 Power Supply
      5. 8.4.5 Peripherals
        1. 8.4.5.1  ADC
        2. 8.4.5.2  ATL
        3. 8.4.5.3  CSI
          1. 8.4.5.3.1 Camera Streaming Interface Receiver (CSI_RX_IF) and MIPI DPHY Receiver (DPHY_RX)
          2. 8.4.5.3.2 Camera Streaming Interface Transmitter (CSI_TX_IF)
        4. 8.4.5.4  CPSW2G
        5. 8.4.5.5  CPSW9G
        6. 8.4.5.6  DCC
        7. 8.4.5.7  DDRSS
        8. 8.4.5.8  DSS
          1. 8.4.5.8.1 DSI
          2. 8.4.5.8.2 eDP
        9. 8.4.5.9  VPFE
        10. 8.4.5.10 eCAP
        11. 8.4.5.11 EPWM
        12. 8.4.5.12 ELM
        13. 8.4.5.13 ESM
        14. 8.4.5.14 eQEP
        15. 8.4.5.15 GPIO
        16. 8.4.5.16 GPMC
        17. 8.4.5.17 Hyperbus
        18. 8.4.5.18 I2C
        19. 8.4.5.19 I3C
        20. 8.4.5.20 MCAN
        21. 8.4.5.21 MCASP
        22. 8.4.5.22 MCRC Controller
        23. 8.4.5.23 MCSPI
        24. 8.4.5.24 MMC/SD
        25. 8.4.5.25 OSPI
        26. 8.4.5.26 PCIE
        27. 8.4.5.27 SerDes
        28. 8.4.5.28 WWDT
        29. 8.4.5.29 Timers
        30. 8.4.5.30 UART
        31. 8.4.5.31 USB
        32. 8.4.5.32 UFS
  9. 9 Applications and Implementation
    1. 9.1 Power Supply Mapping
    2. 9.2 Device Connection and Layout Fundamentals
      1. 9.2.1 Power Supply Decoupling and Bulk Capacitors
        1. 9.2.1.1 Power Distribution Network Implementation Guidance
      2. 9.2.2 External Oscillator
      3. 9.2.3 JTAG and EMU
      4. 9.2.4 Reset
      5. 9.2.5 Unused Pins
      6. 9.2.6 Hardware Design Guide for JacintoTM 7 Devices
    3. 9.3 Peripheral- and Interface-Specific Design Information
      1. 9.3.1 LPDDR4 Board Design and Layout Guidelines
      2. 9.3.2 OSPI and QSPI Board Design and Layout Guidelines
        1. 9.3.2.1 No Loopback and Internal Pad Loopback
        2. 9.3.2.2 External Board Loopback
        3. 9.3.2.3 DQS (only available in Octal Flash devices)
      3. 9.3.3 SERDES REFCLK Design Guidelines
      4. 9.3.4 USB VBUS Design Guidelines
      5. 9.3.5 System Power Supply Monitor Design Guidelines
      6. 9.3.6 High Speed Differential Signal Routing Guidance
      7. 9.3.7 Thermal Solution Guidance
  10. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
      1. 10.1.1 Standard Package Symbolization
      2. 10.1.2 Device Naming Convention
    2. 10.2 Tools and Software
    3. 10.3 Documentation Support
    4. 10.4 サポート・リソース
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 Glossary
  11. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Packaging Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • ALF|827
サーマルパッド・メカニカル・データ
発注情報
7.10.5.12.4 GPMC0 IOSET

Table 7-58 present the specific groupings of signals (IOSET) for use with GPMC0.

Table 7-58 GPMC0 IOSET
Signals IOSET1 IOSET2
BALL NAME MUX BALL NAME MUX
GPMC0_WAIT2 MDIO0_MDC 8 MDIO0_MDC 8
GPMC0_BE1n PRG1_PRU0_GPO0 8 RGMII6_RD1 8
GPMC0_WAIT0 PRG1_PRU0_GPO1 8 PRG1_PRU0_GPO1 8
GPMC0_WAIT1 PRG1_PRU0_GPO2 8 PRG1_PRU0_GPO2 8
GPMC0_DIR PRG1_PRU0_GPO3 8 PRG1_PRU0_GPO3 8
GPMC0_CSn2 PRG1_PRU0_GPO4 8 PRG1_PRU0_GPO4 8
GPMC0_WEn PRG1_PRU0_GPO5 8 PRG1_PRU0_GPO5 8
GPMC0_CSn3 PRG1_PRU0_GPO6 8 PRG1_PRU0_GPO6 8
GPMC0_OEn_REn PRG1_PRU0_GPO8 8 PRG1_PRU0_GPO8 8
GPMC0_ADVn_ALE PRG1_PRU0_GPO9 8 PRG1_PRU0_GPO9 8
GPMC0_BE0n_CLE PRG1_PRU0_GPO10 8 PRG1_PRU0_GPO10 8
GPMC0_WPn PRG1_PRU1_GPO5 8 PRG1_PRU1_GPO5 8
GPMC0_CSn1 PRG1_PRU1_GPO8 8 PRG1_PRU1_GPO8 8
GPMC0_CSn0 PRG1_PRU1_GPO9 8 PRG1_PRU1_GPO9 8
GPMC0_CLKOUT PRG1_PRU1_GPO10 8 PRG1_PRU1_GPO10 8
GPMC0_AD0 PRG0_PRU0_GPO5 8 PRG0_PRU0_GPO5 8
GPMC0_AD1 PRG0_PRU0_GPO7 8 PRG0_PRU0_GPO7 8
GPMC0_AD2 PRG0_PRU0_GPO8 8 PRG0_PRU0_GPO8 8
GPMC0_AD3 PRG0_PRU0_GPO9 8 PRG0_PRU0_GPO9 8
GPMC0_AD4 PRG0_PRU0_GPO10 8 PRG0_PRU0_GPO10 8
GPMC0_AD5 PRG0_PRU0_GPO17 8 PRG0_PRU0_GPO17 8
GPMC0_AD6 PRG0_PRU0_GPO18 8 PRG0_PRU0_GPO18 8
GPMC0_AD7 PRG0_PRU0_GPO19 8 PRG0_PRU0_GPO19 8
GPMC0_AD8 PRG0_PRU1_GPO5 8 PRG0_PRU1_GPO5 8
GPMC0_AD9 PRG0_PRU1_GPO7 8 PRG0_PRU1_GPO7 8
GPMC0_AD10 PRG0_PRU1_GPO8 8 PRG0_PRU1_GPO8 8
GPMC0_AD11 PRG0_PRU1_GPO9 8 PRG0_PRU1_GPO9 8
GPMC0_AD12 PRG0_PRU1_GPO10 8 PRG0_PRU1_GPO10 8
GPMC0_AD13 PRG0_PRU1_GPO17 8 PRG0_PRU1_GPO17 8
GPMC0_AD14 PRG0_PRU1_GPO18 8 PRG0_PRU1_GPO18 8
GPMC0_AD15 PRG0_PRU1_GPO19 8 PRG0_PRU1_GPO19 8
GPMC0_A0 PRG0_MDIO0_MDC 8 PRG0_MDIO0_MDC 8
GPMC0_A1 RGMII5_TX_CTL 8 RGMII5_TX_CTL 8
GPMC0_A2 RGMII5_RX_CTL 8 RGMII5_RX_CTL 8
GPMC0_A3 RGMII5_TD3 8 RGMII5_TD3 8
GPMC0_A4 RGMII5_TD2 8 RGMII5_TD2 8
GPMC0_A5 RGMII5_TD1 8 RGMII5_TD1 8
GPMC0_A6 RGMII5_TD0 8 RGMII5_TD0 8
GPMC0_A7 RGMII5_TXC 8 RGMII5_TXC 8
GPMC0_A8 RGMII5_RXC 8 RGMII5_RXC 8
GPMC0_A9 RGMII5_RD3 8 RGMII5_RD3 8
GPMC0_A10 RGMII5_RD2 8 RGMII5_RD2 8
GPMC0_A11 RGMII5_RD1 8 RGMII5_RD1 8
GPMC0_A12 RGMII5_RD0 8 RGMII5_RD0 8
GPMC0_A13 RGMII6_TX_CTL 8 RGMII6_TX_CTL 8
GPMC0_A14 RGMII6_RX_CTL 8 RGMII6_RX_CTL 8
GPMC0_A15 RGMII6_TD3 8 RGMII6_TD3 8
GPMC0_A16 RGMII6_TD2 8 RGMII6_TD2 8
GPMC0_A17 RGMII6_TD1 8 RGMII6_TD1 8
GPMC0_A18 RGMII6_TD0 8 RGMII6_TD0 8
GPMC0_A19 RGMII6_TXC 8 RGMII6_TXC 8
GPMC0_A20 RGMII6_RXC 8 RGMII6_RXC 8
GPMC0_A21 RGMII6_RD3 8 RGMII6_RD3 8
GPMC0_A22 RGMII6_RD2 8 RGMII6_RD2 8
GPMC0_A23 PRG0_PRU1_GPO2 8 PRG0_PRU1_GPO2 8
GPMC0_A24 PRG0_PRU1_GPO4 8 PRG0_PRU1_GPO4 8
GPMC0_A25 PRG0_PRU1_GPO6 8 PRG0_PRU1_GPO6 8
GPMC0_A26 PRG0_PRU1_GPO11 8 PRG0_PRU1_GPO11 8
GPMC0_A27 PRG0_MDIO0_MDIO 8 PRG0_MDIO0_MDIO 8
GPMC0_WAIT3 MDIO0_MDIO 8 MDIO0_MDIO 8