SPRS841E March   2012  – October 2019 TMS320C6652 , TMS320C6654

PRODUCTION DATA.  

  1. 1 Device Overview
    1. 1.1 Features
    2. 1.2 Applications
    3. 1.3 Description
    4. 1.4 Functional Block Diagram
  2. 2 Revision History
  3. 3 Device Comparison
    1. 3.1 Device Comparison
    2. 3.2 Related Products
  4. 4 Terminal Configuration and Functions
    1. 4.1 Pin Diagram
    2. 4.2 Terminal Functions
  5. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Power Consumption Summary
    5. 5.5 Electrical Characteristics
    6. 5.6 Thermal Resistance Characteristics for [CZH/GZH] Package
    7. 5.7 Timing and Switching Characteristics
      1. 5.7.1  SmartReflex
        1. Table 5-1 SmartReflex 4-Pin VID Interface Switching Characteristics
      2. 5.7.2  Reset Electrical Data / Timing
        1. Table 5-2 Reset Timing Requirements
        2. Table 5-3 Reset Switching Characteristics Over Recommended Operating Conditions
        3. Table 5-4 Boot Configuration Timing Requirements
      3. 5.7.3  Main PLL Stabilization, Lock, and Reset Times
      4. 5.7.4  Main PLL Controller/PCIe Clock Input Electrical Data/Timing
        1. Table 5-6 Main PLL Controller/PCIe Clock Input Timing Requirements
      5. 5.7.5  DDR3 PLL Input Clock Electrical Data/Timing
        1. Table 5-7 DDR3 PLL DDRSYSCLK1(N|P) Timing Requirements
      6. 5.7.6  External Interrupts Electrical Data/Timing
        1. Table 5-8 NMI and Local Reset Timing Requirements
      7. 5.7.7  DDR3 Memory Controller Electrical Data/Timing
      8. 5.7.8  I2C Electrical Data/Timing
        1. 5.7.8.1 Inter-Integrated Circuits (I2C) Timing
          1. Table 5-9  I2C Timing Requirements
          2. Table 5-10 I2C Switching Characteristics
      9. 5.7.9  SPI Peripheral
        1. 5.7.9.1 SPI Timing
          1. Table 5-11 SPI Timing Requirements
          2. Table 5-12 SPI Switching Characteristics
      10. 5.7.10 UART Peripheral
        1. Table 5-13 UART Timing Requirements
        2. Table 5-14 UART Switching Characteristics
      11. 5.7.11 EMIF16 Peripheral
        1. 5.7.11.1 EMIF16 Electrical Data/Timing
          1. Table 5-15 EMIF16 Asynchronous Memory Timing Requirements
      12. 5.7.12 MDIO Timing (C6654 Only)
        1. Table 5-16 MDIO Timing Requirements
        2. Table 5-17 MDIO Switching Characteristics
      13. 5.7.13 Timers Electrical Data/Timing
        1. Table 5-18 Timer Input Timing Requirements
        2. Table 5-19 Timer Output Switching Characteristics
      14. 5.7.14 General-Purpose Input/Output (GPIO)
        1. 5.7.14.1 GPIO Device-Specific Information
        2. 5.7.14.2 GPIO Electrical Data/Timing
          1. Table 5-20 GPIO Input Timing Requirements
          2. Table 5-21 GPIO Output Switching Characteristics
      15. 5.7.15 McBSP Electrical Data/Timing
        1. 5.7.15.1 McBSP Timing
          1. Table 5-22 McBSP Timing Requirements
          2. Table 5-23 McBSP Switching Characteristics
          3. Table 5-24 McBSP Timing Requirements for FSR When GSYNC = 1
      16. 5.7.16 uPP Timing and Switching
        1. Table 5-25 uPP Timing Requirements
        2. Table 5-26 uPP Switching Characteristics
      17. 5.7.17 Trace Electrical Data/Timing
        1. Table 5-27 DSP Trace Switching Characteristics
        2. Table 5-28 STM Trace Switching Characteristics
      18. 5.7.18 JTAG Electrical Data/Timing
        1. Table 5-29 JTAG Test Port Timing Requirements
        2. Table 5-30 JTAG Test Port Switching Characteristics
  6. 6 Detailed Description
    1. 6.1  Recommended Clock and Control Signal Transition Behavior
    2. 6.2  Power Supplies
      1. 6.2.1 Power Supply to Peripheral I/O Mapping
      2. 6.2.2 Power-Supply Sequencing
        1. 6.2.2.1 Core-Before-IO Power Sequencing
        2. 6.2.2.2 IO-Before-Core Power Sequencing
        3. 6.2.2.3 Prolonged Resets
        4. 6.2.2.4 Clocking During Power Sequencing
      3. 6.2.3 Power-Down Sequence
      4. 6.2.4 Power Supply Decoupling and Bulk Capacitors
    3. 6.3  Power Sleep Controller (PSC)
      1. 6.3.1 Power Domains
      2. 6.3.2 Clock Domains
      3. 6.3.3 PSC Register Memory Map
    4. 6.4  Reset Controller
      1. 6.4.1 Power-on Reset
      2. 6.4.2 Hard Reset
      3. 6.4.3 Soft Reset
      4. 6.4.4 Local Reset
      5. 6.4.5 Reset Priority
      6. 6.4.6 Reset Controller Register
    5. 6.5  Main PLL and PLL Controller
      1. 6.5.1 Main PLL Controller Device-Specific Information
        1. 6.5.1.1 Internal Clocks and Maximum Operating Frequencies
        2. 6.5.1.2 Main PLL Controller Operating Modes
      2. 6.5.2 PLL Controller Memory Map
        1. 6.5.2.1 PLL Secondary Control Register (SECCTL)
          1. Table 6-10 PLL Secondary Control Register (SECCTL) Field Descriptions
        2. 6.5.2.2 PLL Controller Divider Register (PLLDIV2, PLLDIV5, PLLDIV8)
          1. Table 6-11 PLL Controller Divider Register (PLLDIVn) Field Descriptions
        3. 6.5.2.3 PLL Controller Clock Align Control Register (ALNCTL)
          1. Table 6-12 PLL Controller Clock Align Control Register (ALNCTL) Field Descriptions
        4. 6.5.2.4 PLLDIV Divider Ratio Change Status Register (DCHANGE)
          1. Table 6-13 PLLDIV Divider Ratio Change Status Register (DCHANGE) Field Descriptions
        5. 6.5.2.5 SYSCLK Status Register (SYSTAT)
          1. Table 6-14 SYSCLK Status Register (SYSTAT) Field Descriptions
        6. 6.5.2.6 Reset Type Status Register (RSTYPE)
          1. Table 6-15 Reset Type Status Register (RSTYPE) Field Descriptions
        7. 6.5.2.7 Reset Control Register (RSTCTRL)
          1. Table 6-16 Reset Control Register (RSTCTRL) Field Descriptions
        8. 6.5.2.8 Reset Configuration Register (RSTCFG)
          1. Table 6-17 Reset Configuration Register (RSTCFG) Field Descriptions
        9. 6.5.2.9 Reset Isolation Register (RSISO)
          1. Table 6-18 Reset Isolation Register (RSISO) Field Descriptions
      3. 6.5.3 Main PLL Control Register
        1. Table 6-19 Main PLL Control Register 0 (MAINPLLCTL0) Field Descriptions
        2. Table 6-20 Main PLL Control Register 1 (MAINPLLCTL1) Field Descriptions
      4. 6.5.4 Main PLL and PLL Controller Initialization Sequence
    6. 6.6  DDR3 PLL
      1. 6.6.1 DDR3 PLL Control Register
        1. Table 6-21 DDR3 PLL Control Register 0 Field Descriptions
        2. Table 6-22 DDR3 PLL Control Register 1 Field Descriptions
      2. 6.6.2 DDR3 PLL Device-Specific Information
      3. 6.6.3 DDR3 PLL Initialization Sequence
    7. 6.7  Enhanced Direct Memory Access (EDMA3) Controller
      1. 6.7.1 EDMA3 Device-Specific Information
      2. 6.7.2 EDMA3 Channel Controller Configuration
      3. 6.7.3 EDMA3 Transfer Controller Configuration
      4. 6.7.4 EDMA3 Channel Synchronization Events
    8. 6.8  Interrupts
      1. 6.8.1 Interrupt Sources and Interrupt Controller
      2. 6.8.2 CIC Registers
        1. 6.8.2.1 CIC0 Register Map
        2. 6.8.2.2 CIC1 Register Map
      3. 6.8.3 Interprocessor Register Map
      4. 6.8.4 NMI and LRESET
    9. 6.9  Memory Protection Unit (MPU)
      1. 6.9.1 MPU Registers
        1. 6.9.1.1 MPU Register Map
        2. 6.9.1.2 Device-Specific MPU Registers
          1. 6.9.1.2.1 Configuration Register (CONFIG)
            1. Table 6-42 Configuration Register (CONFIG) Field Descriptions
      2. 6.9.2 MPU Programmable Range Registers
        1. 6.9.2.1 Programmable Range n Start Address Register (PROGn_MPSAR)
          1. Table 6-43 Programmable Range n Start Address Register (PROGn_MPSAR) Field Descriptions
        2. 6.9.2.2 Programmable Range n End Address Register (PROGn_MPEAR)
          1. Table 6-44 Programmable Range n End Address Register (PROGn_MPEAR) Field Descriptions
        3. 6.9.2.3 Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA)
          1. Table 6-45 Programmable Range n Memory Protection Page Attribute Register (PROGn_MPPA) Field Descriptions
        4. 6.9.2.4 MPU Registers Reset Values
    10. 6.10 DDR3 Memory Controller
      1. 6.10.1 DDR3 Memory Controller Device-Specific Information
    11. 6.11 I2C Peripheral
      1. 6.11.1 I2C Device-Specific Information
      2. 6.11.2 I2C Peripheral Register Description(s)
    12. 6.12 PCIe Peripheral (C6654 Only)
    13. 6.13 Ethernet Media Access Controller (EMAC) (C6654 Only)
      1. 6.13.1 EMAC Device-Specific Information
      2. 6.13.2 EMAC Peripheral Register Description(s)
      3. 6.13.3 EMAC Electrical Data/Timing (SGMII)
    14. 6.14 Management Data Input/Output (MDIO) (C6654 Only)
      1. 6.14.1 MDIO Peripheral Registers
    15. 6.15 Timers
      1. 6.15.1 Timers Device-Specific Information
    16. 6.16 Semaphore2
    17. 6.17 Multichannel Buffered Serial Port (McBSP)
      1. 6.17.1 McBSP Peripheral Register
    18. 6.18 Universal Parallel Port (uPP)
      1. 6.18.1 uPP Register Descriptions
    19. 6.19 Emulation Features and Capability
      1. 6.19.1 Advanced Event Triggering (AET)
      2. 6.19.2 Trace
      3. 6.19.3 IEEE 1149.1 JTAG
        1. 6.19.3.1 IEEE 1149.1 JTAG Compatibility Statement
    20. 6.20 DSP Core Description
    21. 6.21 Memory Map Summary
    22. 6.22 Boot Sequence
    23. 6.23 Boot Modes Supported and PLL Settings
      1. 6.23.1 Boot Device Field
        1. Table 6-61 Boot Mode Pins: Boot Device Values
      2. 6.23.2 Device Configuration Field
        1. 6.23.2.1 EMIF16 / UART / No Boot Device Configuration
          1. Table 6-62 EMIF16 / UART / No Boot Configuration Field Descriptions
          2. 6.23.2.1.1 No Boot Mode
            1. Table 6-63 No Boot Configuration Field Descriptions
          3. 6.23.2.1.2 UART Boot Mode
            1. Table 6-64 UART Boot Configuration Field Descriptions
          4. 6.23.2.1.3 EMIF16 Boot Mode
            1. Table 6-65 EMIF16 Boot Configuration Field Descriptions
        2. 6.23.2.2 Ethernet (SGMII) Boot Device Configuration (C6654 Only)
          1. Table 6-66 Ethernet (SGMII) Configuration Field Descriptions
        3. 6.23.2.3 NAND Boot Device Configuration
          1. Table 6-67 NAND Configuration Field Descriptions
        4. 6.23.2.4 PCI Boot Device Configuration (C6654 Only)
          1. Table 6-68 PCI Device Configuration Field Descriptions
        5. 6.23.2.5 I2C Boot Device Configuration
          1. 6.23.2.5.1 I2C Master Mode
            1. Table 6-70 I2C Master Mode Device Configuration Field Descriptions
          2. 6.23.2.5.2 I2C Passive Mode
            1. Table 6-71 I2C Passive Mode Device Configuration Field Descriptions
        6. 6.23.2.6 SPI Boot Device Configuration
          1. Table 6-72 SPI Device Configuration Field Descriptions
      3. 6.23.3 Boot Parameter Table
        1. Table 6-75 PLL Configuration Field Description
        2. 6.23.3.1   Sleep / XIP Mode Parameter Table
          1. Table 6-77 EMIF16 XIP Option Field Descriptions
        3. 6.23.3.2   Ethernet Mode Boot Parameter Table (C6654 Only)
          1. Table 6-79 Ethernet Options Field Descriptions
          2. Table 6-80 SGMII Config Field Descriptions
        4. 6.23.3.3   NAND Mode Boot Parameter Table
          1. Table 6-82 NAND Boot Parameter Options Bit Field Descriptions
        5. 6.23.3.4   PCIE Mode Boot Parameter Table
          1. Table 6-84 PCIe Options Field Descriptions
        6. 6.23.3.5   I2C Mode Boot Parameter Table
          1. Table 6-86 Register Description
        7. 6.23.3.6   SPI Mode Boot Parameter Table
          1. Table 6-88 SPI Options Field Description
        8. 6.23.3.7   UART Mode Boot Parameter Table
    24. 6.24 PLL Boot Configuration Settings
    25. 6.25 Second-Level Bootloaders
  7. 7 C66x CorePac
    1. 7.1 Memory Architecture
      1. 7.1.1 L1P Memory
      2. 7.1.2 L1D Memory
      3. 7.1.3 L2 Memory
      4. 7.1.4 MSM Controller
      5. 7.1.5 L3 Memory
    2. 7.2 Memory Protection
    3. 7.3 Bandwidth Management
    4. 7.4 Power-Down Control
    5. 7.5 C66x CorePac Revision
      1. Table 7-2 CorePac Revision ID Register (MM_REVID) Field Descriptions
    6. 7.6 C66x CorePac Register Descriptions
  8. 8 Device Configuration
    1. 8.1 Device Configuration at Device Reset
    2. 8.2 Peripheral Selection After Device Reset
    3. 8.3 Device State Control Registers
      1. 8.3.1  Device Status Register
        1. Table 8-3 Device Status Register Field Descriptions
      2. 8.3.2  Device Configuration Register
        1. Table 8-4 Device Configuration Register Field Descriptions
      3. 8.3.3  JTAG ID (JTAGID) Register Description
        1. Table 8-5 JTAG ID Register Field Descriptions
      4. 8.3.4  Kicker Mechanism (KICK0 and KICK1) Register
      5. 8.3.5  LRESETNMI PIN Status (LRSTNMIPINSTAT) Register
        1. Table 8-6 LRESETNMI PIN Status Register (LRSTNMIPINSTAT) Field Descriptions
      6. 8.3.6  LRESETNMI PIN Status Clear (LRSTNMIPINSTAT_CLR) Register
        1. Table 8-7 LRESETNMI PIN Status Clear Register (LRSTNMIPINSTAT_CLR) Field Descriptions
      7. 8.3.7  Reset Status (RESET_STAT) Register
        1. Table 8-8 Reset Status Register (RESET_STAT) Field Descriptions
      8. 8.3.8  Reset Status Clear (RESET_STAT_CLR) Register
        1. Table 8-9 Reset Status Clear Register (RESET_STAT_CLR) Field Descriptions
      9. 8.3.9  Boot Complete (BOOTCOMPLETE) Register
        1. Table 8-10 Boot Complete Register (BOOTCOMPLETE) Field Descriptions
      10. 8.3.10 Power State Control (PWRSTATECTL) Register
        1. Table 8-11 Power State Control Register (PWRSTATECTL) Field Descriptions
      11. 8.3.11 NMI Event Generation to CorePac (NMIGRx) Register
        1. Table 8-12 NMI Generation Register (NMIGRx) Field Descriptions
      12. 8.3.12 IPC Generation (IPCGRx) Registers
        1. Table 8-13 IPC Generation Registers (IPCGRx) Field Descriptions
      13. 8.3.13 IPC Acknowledgement (IPCARx) Registers
        1. Table 8-14 IPC Acknowledgement Registers (IPCARx) Field Descriptions
      14. 8.3.14 IPC Generation Host (IPCGRH) Register
        1. Table 8-15 IPC Generation Registers (IPCGRH) Field Descriptions
      15. 8.3.15 IPC Acknowledgement Host (IPCARH) Register
        1. Table 8-16 IPC Acknowledgement Register (IPCARH) Field Descriptions
      16. 8.3.16 Timer Input Selection Register (TINPSEL)
        1. Table 8-17 Timer Input Selection Field Description (TINPSEL)
      17. 8.3.17 Timer Output Selection Register (TOUTPSEL)
        1. Table 8-18 Timer Output Selection Field Description (TOUTPSEL)
      18. 8.3.18 Reset Mux (RSTMUXx) Register
        1. Table 8-19 Reset Mux Register Field Descriptions
      19. 8.3.19 Device Speed (DEVSPEED) Register
        1. Table 8-20 Device Speed Register Field Descriptions
      20. 8.3.20 Pin Control 0 (PIN_CONTROL_0) Register
        1. Table 8-21 Pin Control 0 Register Field Descriptions
      21. 8.3.21 Pin Control 1 (PIN_CONTROL_1) Register
        1. Table 8-22 Pin Control 1 Register Field Descriptions
      22. 8.3.22 uPP Clock Source (UPP_CLOCK) Register
        1. Table 8-23 uPP Clock Source Register Field Descriptions
    4. 8.4 Pullup and Pulldown Resistors
  9. 9 System Interconnect
    1. 9.1 Internal Buses and Switch Fabrics
    2. 9.2 Switch Fabric Connections Matrix
    3. 9.3 TeraNet Switch Fabric Connections
    4. 9.4 Bus Priorities
      1. 9.4.1 Packet DMA Priority Allocation (PKTDMA_PRI_ALLOC) Register
        1. Table 9-3 Packet DMA Priority Allocation Register (PKTDMA_PRI_ALLOC) Field Descriptions
      2. 9.4.2 EMAC / uPP Priority Allocation (EMAC_UPP_PRI_ALLOC) Register (C6654 Only)
        1. Table 9-4 EMAC / uPP Priority Allocation Register (EMAC_UPP_PRI_ALLOC) Field Descriptions
  10. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
    2. 10.2 Tools and Software
    3. 10.3 Documentation Support
    4. 10.4 Related Links
    5. 10.5 Support Resources
    6. 10.6 Trademarks
    7. 10.7 Electrostatic Discharge Caution
    8. 10.8 Glossary
  11. 11Mechanical Packaging and Orderable Information
    1. 11.1 Packaging Information

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • CZH|625
サーマルパッド・メカニカル・データ
発注情報

6.8.2.1 CIC0 Register Map

Table 6-29 describes the CIC0 registers.

Table 6-29 CIC0 Register

ADDRESS OFFSET REGISTER MNEMONIC REGISTER NAME
0x0 REVISION_REG Revision Register
0x4 CONTROL_REG Control Register
0xc HOST_CONTROL_REG Host Control Register
0x10 GLOBAL_ENABLE_HINT_REG Global Host Int Enable Register
0x20 STATUS_SET_INDEX_REG Status Set Index Register
0x24 STATUS_CLR_INDEX_REG Status Clear Index Register
0x28 ENABLE_SET_INDEX_REG Enable Set Index Register
0x2c ENABLE_CLR_INDEX_REG Enable Clear Index Register
0x34 HINT_ENABLE_SET_INDEX_REG Host Int Enable Set Index Register
0x38 HINT_ENABLE_CLR_INDEX_REG Host Int Enable Clear Index Register
0x200 RAW_STATUS_REG0 Raw Status Register 0
0x204 RAW_STATUS_REG1 Raw Status Register 1
0x208 RAW_STATUS_REG2 Raw Status Register 2
0x20c RAW_STATUS_REG3 Raw Status Register 3
0x210 RAW_STATUS_REG4 Raw Status Register 4
0x214 RAW_STATUS_REG5 Raw Status Register 5
0x218 RAW_STATUS_REG6 Raw Status Register 6
0x280 ENA_STATUS_REG0 Enabled Status Register 0
0x284 ENA_STATUS_REG1 Enabled Status Register 1
0x288 ENA_STATUS_REG2 Enabled Status Register 2
0x28c ENA_STATUS_REG3 Enabled Status Register 3
0x290 ENA_STATUS_REG4 Enabled Status Register 4
0x294 ENA_STATUS_REG5 Enabled Status Register 5
0x298 ENA_STATUS_REG6 Enabled Status Register 6
0x300 ENABLE_REG0 Enable Register 0
0x304 ENABLE_REG1 Enable Register 1
0x308 ENABLE_REG2 Enable Register 2
0x30c ENABLE_REG3 Enable Register 3
0x310 ENABLE_REG4 Enable Register 4
0x314 ENABLE_REG5 Enable Register 5
0x318 ENABLE_REG6 Enable Register 6
0x380 ENABLE_CLR_REG0 Enable Clear Register 0
0x384 ENABLE_CLR_REG1 Enable Clear Register 1
0x388 ENABLE_CLR_REG2 Enable Clear Register 2
0x38c ENABLE_CLR_REG3 Enable Clear Register 3
0x390 ENABLE_CLR_REG4 Enable Clear Register 4
0x394 ENABLE_CLR_REG5 Enable Clear Register 5
0x398 ENABLE_CLR_REG6 Enable Clear Register 6
0x400 CH_MAP_REG0 Interrupt Channel Map Register for 0 to 0+3
0x404 CH_MAP_REG1 Interrupt Channel Map Register for 4 to 4+3
0x408 CH_MAP_REG2 Interrupt Channel Map Register for 8 to 8+3
0x40c CH_MAP_REG3 Interrupt Channel Map Register for 12 to 12+3
0x410 CH_MAP_REG4 Interrupt Channel Map Register for 16 to 16+3
0x414 CH_MAP_REG5 Interrupt Channel Map Register for 20 to 20+3
0x418 CH_MAP_REG6 Interrupt Channel Map Register for 24 to 24+3
0x41c CH_MAP_REG7 Interrupt Channel Map Register for 28 to 28+3
0x420 CH_MAP_REG8 Interrupt Channel Map Register for 32 to 32+3
0x424 CH_MAP_REG9 Interrupt Channel Map Register for 36 to 36+3
0x428 CH_MAP_REG10 Interrupt Channel Map Register for 40 to 40+3
0x42c CH_MAP_REG11 Interrupt Channel Map Register for 44 to 44+3
0x430 CH_MAP_REG12 Interrupt Channel Map Register for 48 to 48+3
0x434 CH_MAP_REG13 Interrupt Channel Map Register for 52 to 52+3
0x438 CH_MAP_REG14 Interrupt Channel Map Register for 56 to 56+3
0x43c CH_MAP_REG15 Interrupt Channel Map Register for 60 to 60+3
0x440 CH_MAP_REG16 Interrupt Channel Map Register for 64 to 64+3
0x444 CH_MAP_REG17 Interrupt Channel Map Register for 68 to 68+3
0x448 CH_MAP_REG18 Interrupt Channel Map Register for 72 to 72+3
0x44c CH_MAP_REG19 Interrupt Channel Map Register for 76 to 76+3
0x450 CH_MAP_REG20 Interrupt Channel Map Register for 80 to 80+3
0x454 CH_MAP_REG21 Interrupt Channel Map Register for 84 to 84+3
0x458 CH_MAP_REG22 Interrupt Channel Map Register for 88 to 88+3
0x45c CH_MAP_REG23 Interrupt Channel Map Register for 92 to 92+3
0x460 CH_MAP_REG24 Interrupt Channel Map Register for 96 to 96+3
0x464 CH_MAP_REG25 Interrupt Channel Map Register for 100 to 100+3
0x468 CH_MAP_REG26 Interrupt Channel Map Register for 104 to 104+3
0x46c CH_MAP_REG27 Interrupt Channel Map Register for 108 to 108+3
0x470 CH_MAP_REG28 Interrupt Channel Map Register for 112 to 112+3
0x474 CH_MAP_REG29 Interrupt Channel Map Register for 116 to 116+3
0x478 CH_MAP_REG30 Interrupt Channel Map Register for 120 to 120+3
0x47c CH_MAP_REG31 Interrupt Channel Map Register for 124 to 124+3
0x480 CH_MAP_REG32 Interrupt Channel Map Register for 128 to 128+3
0x484 CH_MAP_REG33 Interrupt Channel Map Register for 132 to 132+3
0x488 CH_MAP_REG34 Interrupt Channel Map Register for 136 to 136+3
0x48c CH_MAP_REG35 Interrupt Channel Map Register for 140 to 140+3
0x490 CH_MAP_REG36 Interrupt Channel Map Register for 144 to 144+3
0x494 CH_MAP_REG37 Interrupt Channel Map Register for 148 to 148+3
0x498 CH_MAP_REG38 Interrupt Channel Map Register for 152 to 152+3
0x49c CH_MAP_REG39 Interrupt Channel Map Register for 156 to 156+3
0x4a0 CH_MAP_REG40 Interrupt Channel Map Register for 160 to 160+3
0x4a4 CH_MAP_REG41 Interrupt Channel Map Register for 164 to 164+3
0x4a8 CH_MAP_REG42 Interrupt Channel Map Register for 168 to 168+3
0x4ac CH_MAP_REG43 Interrupt Channel Map Register for 172 to 172+3
0x4b0 CH_MAP_REG44 Interrupt Channel Map Register for 176 to 176+3
0x4b4 CH_MAP_REG45 Interrupt Channel Map Register for 180 to 180+3
0x4b8 CH_MAP_REG46 Interrupt Channel Map Register for 184 to 184+3
0x4bc CH_MAP_REG47 Interrupt Channel Map Register for 188 to 188+3
0x4c0 CH_MAP_REG48 Interrupt Channel Map Register for 192 to 192+3
0x4c4 CH_MAP_REG49 Interrupt Channel Map Register for 196 to 196+3
0x4c8 CH_MAP_REG50 Interrupt Channel Map Register for 200 to 200+3
0x4cc CH_MAP_REG51 Interrupt Channel Map Register for 204 to 204+3
0x800 HINT_MAP_REG0 Host Interrupt Map Register for 0 to 0+3
0x804 HINT_MAP_REG1 Host Interrupt Map Register for 4 to 4+3
0x808 HINT_MAP_REG2 Host Interrupt Map Register for 8 to 8+3
0x80c HINT_MAP_REG3 Host Interrupt Map Register for 12 to 12+3
0x810 HINT_MAP_REG4 Host Interrupt Map Register for 16 to 16+3
0x814 HINT_MAP_REG5 Host Interrupt Map Register for 20 to 20+3
0x818 HINT_MAP_REG6 Host Interrupt Map Register for 24 to 24+3
0x81c HINT_MAP_REG7 Host Interrupt Map Register for 28 to 28+3
0x820 HINT_MAP_REG8 Host Interrupt Map Register for 32 to 32+3
0x824 HINT_MAP_REG9 Host Interrupt Map Register for 36 to 36+3
0x828 HINT_MAP_REG10 Host Interrupt Map Register for 40 to 40+3
0x82c HINT_MAP_REG11 Host Interrupt Map Register for 44 to 44+3
0x830 HINT_MAP_REG12 Host Interrupt Map Register for 48 to 48+3
0x834 HINT_MAP_REG13 Host Interrupt Map Register for 52 to 52+3
0x838 HINT_MAP_REG14 Host Interrupt Map Register for 56 to 56+3
0x83c HINT_MAP_REG15 Host Interrupt Map Register for 60 to 60+3
0x840 HINT_MAP_REG16 Host Interrupt Map Register for 64 to 64+3
0x844 HINT_MAP_REG17 Host Interrupt Map Register for 68 to 68+3
0x848 HINT_MAP_REG18 Host Interrupt Map Register for 72 to 72+3
0x84c HINT_MAP_REG19 Host Interrupt Map Register for 76 to 76+3
0x850 HINT_MAP_REG20 Host Interrupt Map Register for 80 to 80+3
0x854 HINT_MAP_REG21 Host Interrupt Map Register for 84 to 84+3
0x858 HINT_MAP_REG22 Host Interrupt Map Register for 88 to 88+3
0x860 HINT_MAP_REG23 Host Interrupt Map Register for 92 to 92+3
0x1500 ENABLE_HINT_REG0 Host Int Enable Register 0
0x1504 ENABLE_HINT_REG1 Host Int Enable Register 1
0x1508 ENABLE_HINT_REG2 Host Int Enable Register 2