JAJSHI3C March   2019  – October 2019 TPS23881

PRODUCTION DATA.  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
    1.     Device Images
      1.      概略回路図
  4. 4 改訂履歴
  5. 5 概要（続き）
  6. 6 Device Comparison Table
  7. 7 Pin Configuration and Functions
    1.     Pin Functions
    2. 7.1 Detailed Pin Description
  8. 8 Specifications
    1. 8.1 Absolute Maximum Ratings
    2. 8.2 ESD Ratings
    3. 8.3 Recommended Operating Conditions
    4. 8.4 Thermal Information
    5. 8.5 Electrical Characteristics
    6. 8.6 Typical Characteristics
  9. 9 Parameter Measurement Information
    1. 9.1 Timing Diagrams
  10. 10Detailed Description
    1. 10.1 Overview
      1. 10.1.1 Operating Modes
        1. 10.1.1.1 Auto
        2. 10.1.1.2 Autonomous
        3. 10.1.1.3 Semiauto
        4. 10.1.1.4 Manual/Diagnostic
        5. 10.1.1.5 Power Off
      2. 10.1.2 Channel versus Port Terminology
      3. 10.1.3 Requested Class versus Assigned Class
      4. 10.1.4 Power Allocation and Power Demotion
    2. 10.2 Functional Block Diagram
    3. 10.3 Feature Description
      1. 10.3.1 Port Remapping
      2. 10.3.2 Port Power Priority
      3. 10.3.3 Analog-to-Digital Converters (ADC)
      4. 10.3.4 I2C Watchdog
      5. 10.3.5 Current Foldback Protection
    4. 10.4 Device Functional Modes
      1. 10.4.1 Detection
      2. 10.4.2 Connection Check
      3. 10.4.3 Classification
      4. 10.4.4 DC Disconnect
    5. 10.5 I2C Programming
      1. 10.5.1 I2C Serial Interface
    6. 10.6 Register Maps
      1. 10.6.1 Complete Register Set
      2. 10.6.2 Detailed Register Descriptions
        1. 10.6.2.1  INTERRUPT Register
          1. Table 5. INTERRUPT Register Field Descriptions
        2. 10.6.2.2  INTERRUPT MASK Register
          1. Table 6. INTERRUPT MASK Register Field Descriptions
        3. 10.6.2.3  POWER EVENT Register
          1. Table 7. POWER EVENT Register Field Descriptions
        4. 10.6.2.4  DETECTION EVENT Register
          1. Table 8. DETECTION EVENT Register Field Descriptions
        5. 10.6.2.5  FAULT EVENT Register
          1. Table 9. FAULT EVENT Register Field Descriptions
        6. 10.6.2.6  START/ILIM EVENT Register
          1. Table 10. START/ILIM EVENT Register Field Descriptions
        7. 10.6.2.7  SUPPLY and FAULT EVENT Register
          1. Table 11.  SUPPLY and FAULT EVENT Register Field Descriptions
          2. 10.6.2.7.1 Detected SRAM Faults and "Safe Mode"
            1. 10.6.2.7.1.1 ULA (Ultra Low Alpha) Package Option: TPS23881A
        8. 10.6.2.8  CHANNEL 1 DISCOVERY Register
        9. 10.6.2.9  CHANNEL 2 DISCOVERY Register
        10. 10.6.2.10 CHANNEL 3 DISCOVERY Register
        11. 10.6.2.11 CHANNEL 4 DISCOVERY Register
          1. Table 12. CHANNEL n DISCOVERY Register Field Descriptions
        12. 10.6.2.12 POWER STATUS Register
          1. Table 13. POWER STATUS Register Field Descriptions
        13. 10.6.2.13 PIN STATUS Register
          1. Table 14.   PIN STATUS Register Field Descriptions
          2. 10.6.2.13.1 AUTONOMOUS MODE
        14. 10.6.2.14 OPERATING MODE Register
          1. Table 16. OPERATING MODE Register Field Descriptions
        15. 10.6.2.15 DISCONNECT ENABLE Register
          1. Table 20. DISCONNECT ENABLE Register Field Descriptions
        16. 10.6.2.16 DETECT/CLASS ENABLE Register
          1. Table 21. DETECT/CLASS ENABLE Register Field Descriptions
        17. 10.6.2.17 Power Priority / 2Pair PCUT Disable Register Name
          1. Table 22. Power Priority / 2P-PCUT Disable Register Field Descriptions
        18. 10.6.2.18 TIMING CONFIGURATION Register
          1. Table 24. TIMING CONFIGURATION Register Field Descriptions
        19. 10.6.2.19 GENERAL MASK Register
          1. Table 25. GENERAL MASK Register Field Descriptions
        20. 10.6.2.20 DETECT/CLASS RESTART Register
          1. Table 27. DETECT/CLASS RESTART Register Field Descriptions
        21. 10.6.2.21 POWER ENABLE Register
          1. Table 28. POWER ENABLE Register Field Descriptions
        22. 10.6.2.22 RESET Register
          1. Table 32. RESET Register Field Descriptions
        23. 10.6.2.23 ID Register
          1. Table 34. ID Register Field Descriptions
        24. 10.6.2.24 Connection Check and Auto Class Status Register
          1. Table 35. Connection Check and Auto Class Field Descriptions
        25. 10.6.2.25 2-Pair Police Ch-1 Configuration Register
        26. 10.6.2.26 2-Pair Police Ch-2 Configuration Register
        27. 10.6.2.27 2-Pair Police Ch-3 Configuration Register
        28. 10.6.2.28 2-Pair Police Ch-4 Configuration Register
          1. Table 36. 2-Pair Policing Register Fields Descriptions
        29. 10.6.2.29 Capacitance (Legacy PD) Detection
          1. Table 39. Capacitance Detection Register Field Descriptions
        30. 10.6.2.30 Power-on Fault Register
          1. Table 40. Power-on Fault Register Field Descriptions
        31. 10.6.2.31 PORT RE-MAPPING Register
          1. Table 41. PORT RE-MAPPING Register Field Descriptions
        32. 10.6.2.32 Channels 1 and 2 Multi Bit Priority Register
        33. 10.6.2.33 Channels 3 and 4 Multi Bit Priority Register
          1. Table 42. Channels n MBP Register Field Descriptions
        34. 10.6.2.34 4-Pair Wired and Port Power Allocation Register
          1. Table 44. 4-Pair Wired and Power Allocation Register Field Descriptions
        35. 10.6.2.35 4-Pair Police Ch-1 and 2 Configuration Register
        36. 10.6.2.36 4-Pair Police Ch-3 and 4 Configuration Register
          1. Table 46. 4-Pair Police Register Field Descriptions
        37. 10.6.2.37 TEMPERATURE Register
          1. Table 48. TEMPERATURE Register Field Descriptions
        38. 10.6.2.38 4-Pair Fault Configuration Register
          1. Table 49. 4-Pair Fault Register Field Descriptions
        39. 10.6.2.39 INPUT VOLTAGE Register
          1. Table 50. INPUT VOLTAGE Register Field Descriptions
        40. 10.6.2.40 CHANNEL 1 CURRENT Register
        41. 10.6.2.41 CHANNEL 2 CURRENT Register
        42. 10.6.2.42 CHANNEL 3 CURRENT Register
        43. 10.6.2.43 CHANNEL 4 CURRENT Register
          1. Table 51. CHANNEL n CURRENT Register Field Descriptions
        44. 10.6.2.44 CHANNEL 1 VOLTAGE Register
        45. 10.6.2.45 CHANNEL 2 VOLTAGE Register
        46. 10.6.2.46 CHANNEL 3 VOLTAGE Register
        47. 10.6.2.47 CHANNEL 4 VOLTAGE Register
          1. Table 52. CHANNEL n VOLTAGE Register Field Descriptions
        48. 10.6.2.48 2x FOLDBACK SELECTION Register
          1. Table 53. 2x FOLDBACK SELECTION Register Field Descriptions
        49. 10.6.2.49 FIRMWARE REVISION Register
          1. Table 54. FIRMWARE REVISION Register Field Descriptions
        50. 10.6.2.50 I2C WATCHDOG Register
          1. Table 55. I2C WATCHDOG Register Field Descriptions
        51. 10.6.2.51 DEVICE ID Register
          1. Table 57. DEVICE ID Register Field Descriptions
        52. 10.6.2.52 CHANNEL 1 DETECT RESISTANCE Register
        53. 10.6.2.53 CHANNEL 2 DETECT RESISTANCE Register
        54. 10.6.2.54 CHANNEL 3 DETECT RESISTANCE Register
        55. 10.6.2.55 CHANNEL 4 DETECT RESISTANCE Register
          1. Table 58. DETECT RESISTANCE Register Fields Descriptions
        56. 10.6.2.56 CHANNEL 1 DETECT CAPACITANCE Register
        57. 10.6.2.57 CHANNEL 2 DETECT CAPACITANCE Register
        58. 10.6.2.58 CHANNEL 3 DETECT CAPACITANCE Register
        59. 10.6.2.59 CHANNEL 4 DETECT CAPACITANCE Register
          1. Table 59. DETECT CAPACITANCE Register Fields Descriptions
        60. 10.6.2.60 CHANNEL 1 ASSIGNED CLASS Register
        61. 10.6.2.61 CHANNEL 2 ASSIGNED CLASS Register
        62. 10.6.2.62 CHANNEL 3 ASSIGNED CLASS Register
        63. 10.6.2.63 CHANNEL 4 ASSIGNED CLASS Register
          1. Table 60. CHANNEL n ASSIGNED CLASS Register Field Descriptions
        64. 10.6.2.64 AUTO CLASS CONTROL Register
          1. Table 63. AUTO CLASS CONTROL Register Field Descriptions
        65. 10.6.2.65 CHANNEL 1 AUTO CLASS POWER Register
        66. 10.6.2.66 CHANNEL 2 AUTO CLASS POWER Register
        67. 10.6.2.67 CHANNEL 3 AUTO CLASS POWER Register
        68. 10.6.2.68 CHANNEL 4 AUTO CLASS POWER Register
          1. Table 65. AUTO CLASS POWER Register Fields Descriptions
        69. 10.6.2.69 ALTERNATIVE FOLDBACK Register
          1. Table 66. ALTERNATIVE FOLDBACK Register Field Descriptions
        70. 10.6.2.70 SRAM CONTROL Register
          1. Table 67. SRAM CONTROL Register Field Descriptions
        71. 10.6.2.71 SRAM START ADDRESS (LSB) Register
        72. 10.6.2.72 SRAM START ADDRESS (MSB) Register
          1. Table 68. SRAM START ADDRESS Register Field Descriptions
  11. 11Application and Implementation
    1. 11.1 Application Information
      1. 11.1.1 Autonomous Operation
      2. 11.1.2 Introduction to PoE
        1. 11.1.2.1 2-Pair Versus 4-Pair Power and the New IEEE802.3bt Standard
      3. 11.1.3 SRAM Programming
    2. 11.2 Typical Application
      1. 11.2.1 Design Requirements
      2. 11.2.2 Detailed Design Procedure
        1. 11.2.2.1 Connections on Unused Channels
        2. 11.2.2.2 Power Pin Bypass Capacitors
        3. 11.2.2.3 Per Port Components
        4. 11.2.2.4 System Level Components (not shown in the schematic diagrams)
      3. 11.2.3 Application Curves
  12. 12Power Supply Recommendations
    1. 12.1 VDD
    2. 12.2 VPWR
  13. 13Layout
    1. 13.1 Layout Guidelines
      1. 13.1.1 Kelvin Current Sensing Resistors
    2. 13.2 Layout Example
      1. 13.2.1 Component Placement and Routing Guidelines
        1. 13.2.1.1 Power Pin Bypass Capacitors
        2. 13.2.1.2 Per-Port Components
  14. 14デバイスおよびドキュメントのサポート
    1. 14.1 ドキュメントのサポート
      1. 14.1.1 関連資料
    2. 14.2 ドキュメントの更新通知を受け取る方法
    3. 14.3 サポート・リソース
    4. 14.4 商標
    5. 14.5 静電気放電に関する注意事項
    6. 14.6 Glossary
  15. 15メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

10.6.2.33 Channels 3 and 4 Multi Bit Priority Register

COMMAND = 28h with 1 Data Byte, Read/Write

Figure 77. Channels 3 and 4 MBP Register Format
7 6 5 4 3 2 1 0
– MBP4_2 MBP4_1 MBP4_0 – MBP3_2 MBP3_1 MBP3_0
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W–0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset

Table 42. Channels n MBP Register Field Descriptions

Bit Field Type Reset Description
7–0 MBPn_2-0 R/W 0 MBPn_2-0: Multi Bit Priority bits, three bits per channel, if 3-bit shutdown priority has been selected (MbitPrty in General Mask register is high). It is used to determine which channel(s) is (are) shut down in response to a serial shutdown code received at the OSS shutdown input.

The turn off procedure (including register bits clearing) is similar to a channel reset using Reset command (1Ah register), except that it does not cancel any ongoing fault cool down time count.

The priority is defined as followings:

OSS code ≤ MBPn_2-0 : when the OSS code is received, the corresponding channel is powered off.

OSS code > MBPn_2-0 : OSS code has no impact on the channel

MBPn_2-0 0x27/28 Register Multi Bit Priority OSS Code for Channel Off
0 0 0 Highest OSS = ‘000’
0 0 1 2 OSS = ‘000’ or ‘001’
0 1 0 3 OSS ≤ ‘010’
0 1 1 4 OSS ≤ ‘011’
1 0 0 5 OSS ≤ ‘100’
1 0 1 6 OSS = any code except ‘111’
1 1 1 Lowest OSS = any code

The priority reduces as the 3-bit value increases. Thus, a channel with a "000" setting has the highest priority, while one with a "111" setting has the lowest.

It is permissible to apply the same settings to multiple channels. Doing so will result in all channels with the same setting will be disabled when the appropriate OSS code is presented.

For 4-pair wired Ports, these bits control the individual Channel response. In order for both pair sets of a 4-pair wire Port to be disabled, both channels need to have the same MBP setting otherwise it is possible for only one pair set to be disabled.

In the event a singular channel of a 4-pair dual signature PD is turned off due to OSS or other reason, power may be reapplied to that channel by setting the PWON bit in 0x19h provided the detection and classification are still valid and the Power Allocation settings in 0x29 are sufficient based on the assigned classification of the powered channel.

The turn off procedure due to OSS is similar to a channel reset or change to OFF mode, with the exception that OSS does not cancel any ongoing fault cool down timers. the table below includes the bits that will be cleared when a channel is disabled due to OSS:

Table 43. Channel Turn Off with MBP OSS

Register Bits to be Reset
0x04 CLSCn and DETCn
0x06 DISFn and PCUTn
0x08 STRTn and ILIMn
0x0A/B PCUTnn
0x0C-0F Requested Class and Detection
0x10 PGn and PEn
0x14 CLEn and DETEn
0x1C ACn and CCnn
0x1E-21 2P Policing set to 0xFFh
0x24 PFn
0x2A-2B 4P Policing set to 0xFFh
0x2D NLMnn, NCTnn, 4PPCTnn, and DCDTnn
0x30-3F Channel Voltage and Current Measurements
0x40 2xFBn
0x44 - 47 Detection Resistance Measurements
0x4C-4F Assigned Class and Previous Class
0x51-54 Autoclass Measurement

SPACE

NOTE

There is no memory of any preceding 3-bit OSS commands. Each 3-bit OSS command is processed immediately (prior to the end of the last OSS MBP pulse) based on the MBPn settings for each Channel. Any attempt to shutdown additional Channels thereafter will require additional 3-bit OSS commands.