The DRV8301-Q1 device is an automotive gate driver IC for three phase motor drive
applications. The device provides three half bridge drivers, each capable of driving two N-type
MOSFETs, one for the high-side and one for the low side. The device supports up to 2.3-A sink and
1.7-A source peak current capability and only needs a single power supply with a wide range from 6
to 60 V. The DRV8301-Q1 device uses bootstrap gate drivers with trickle charge circuitry to support
100% duty cycle. The gate driver uses automatic hand shaking when high-side FET or low-side FET is
switching to prevent current shoot through. VDS of FETs is sensed to protect
external power stage during overcurrent conditions.
The DRV8301-Q1 device includes two current shunt amplifiers for accurate current
measurement. The current amplifiers support bi-directional current sensing and provide an
adjustable output offset of up to 3 V.
The DRV8301-Q1 device also has an integrated switching mode buck converter with
adjustable output and switching frequency to support MCU or additional system power needs. The buck
is capable to drive up to 1.5-A load.
The SPI interface provides detailed fault reporting and flexible parameter settings such
as gain options for current shunt amplifier, slew rate control of gate driver, and other
settings.
The DRV8301-Q1 device is an automotive gate driver IC for three phase motor drive
applications. The device provides three half bridge drivers, each capable of driving two N-type
MOSFETs, one for the high-side and one for the low side. The device supports up to 2.3-A sink and
1.7-A source peak current capability and only needs a single power supply with a wide range from 6
to 60 V. The DRV8301-Q1 device uses bootstrap gate drivers with trickle charge circuitry to support
100% duty cycle. The gate driver uses automatic hand shaking when high-side FET or low-side FET is
switching to prevent current shoot through. VDS of FETs is sensed to protect
external power stage during overcurrent conditions.
The DRV8301-Q1 device includes two current shunt amplifiers for accurate current
measurement. The current amplifiers support bi-directional current sensing and provide an
adjustable output offset of up to 3 V.
The DRV8301-Q1 device also has an integrated switching mode buck converter with
adjustable output and switching frequency to support MCU or additional system power needs. The buck
is capable to drive up to 1.5-A load.
The SPI interface provides detailed fault reporting and flexible parameter settings such
as gain options for current shunt amplifier, slew rate control of gate driver, and other
settings.