製品詳細

Sample rate (max) (Msps) 50 Resolution (Bits) 8 Number of input channels 1 Interface type Parallel CMOS Analog input BW (MHz) 120 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 125 Architecture Two-Step SNR (dB) 48 ENOB (bit) 7.3 SFDR (dB) 57 Operating temperature range (°C) -20 to 75 Input buffer No
Sample rate (max) (Msps) 50 Resolution (Bits) 8 Number of input channels 1 Interface type Parallel CMOS Analog input BW (MHz) 120 Features Low Power Rating Catalog Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 125 Architecture Two-Step SNR (dB) 48 ENOB (bit) 7.3 SFDR (dB) 57 Operating temperature range (°C) -20 to 75 Input buffer No
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4

  • Internal Track-and-Hold function
  • Single +5V operation
  • Internal reference bias resistors
  • Industry standard pinout
  • Power-down mode (<5 mW)

  • Key Specifications

    Resolution

    8 Bits

    Maximum Sampling Frequency

    50 MSPS (min)

    THD

    54 dB (typ)

    DNL

    0.7 LSB (typ)

    ENOB @ fIN = 25 MHz

    6.8 Bits (typ)

    Guaranteed No Missing Codes

    Power Consumption (Excluding Reference Current)

    125 mW (typ), 190 mW (max)


  • Internal Track-and-Hold function
  • Single +5V operation
  • Internal reference bias resistors
  • Industry standard pinout
  • Power-down mode (<5 mW)

  • Key Specifications

    Resolution

    8 Bits

    Maximum Sampling Frequency

    50 MSPS (min)

    THD

    54 dB (typ)

    DNL

    0.7 LSB (typ)

    ENOB @ fIN = 25 MHz

    6.8 Bits (typ)

    Guaranteed No Missing Codes

    Power Consumption (Excluding Reference Current)

    125 mW (typ), 190 mW (max)


    The ADC1175-50 is a low power, 50 MSPS analog-to-digital converter that digitizes signals to 8 bits while consuming just 125 mW (typ). The ADC1175-50 uses a unique architecture that achieves 6.8 Effective Bits at 25 MHz input and 50 MHz clock frequency. Output formatting is straight binary coding.

    The excellent DC and AC characteristics of this device, together with its low power consumption and +5V single supply operation, make it ideally suited for many video and imaging applications, including use in portable equipment. Furthermore, the ADC1175-50 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC1175-50's reference ladder is available for connections, enabling a wide range of input possibilities. The low input capacitance (7 pF, typical) makes this device easier to drive than conventional flash converters and the power down mode reduces power consumption to less than 5 mW.

    The ADC1175-50 is offered in TSSOP and is designed to operate over the extended commercial temperature range of −20°C to +75°C.


    The ADC1175-50 is a low power, 50 MSPS analog-to-digital converter that digitizes signals to 8 bits while consuming just 125 mW (typ). The ADC1175-50 uses a unique architecture that achieves 6.8 Effective Bits at 25 MHz input and 50 MHz clock frequency. Output formatting is straight binary coding.

    The excellent DC and AC characteristics of this device, together with its low power consumption and +5V single supply operation, make it ideally suited for many video and imaging applications, including use in portable equipment. Furthermore, the ADC1175-50 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC1175-50's reference ladder is available for connections, enabling a wide range of input possibilities. The low input capacitance (7 pF, typical) makes this device easier to drive than conventional flash converters and the power down mode reduces power consumption to less than 5 mW.

    The ADC1175-50 is offered in TSSOP and is designed to operate over the extended commercial temperature range of −20°C to +75°C.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    2 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート ADC1175-50 8-Bit, 50 MSPS, 125 mW A/D Converter (jp) データシート (Rev. F 翻訳版) 最新英語版 (Rev.G) PDF | HTML 2007年 9月 26日
    EVM ユーザー ガイド (英語) ADC117x Evaluation Module User's Guide 2018年 3月 8日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    シミュレーション・ツール

    PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

    PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

    設計とシミュレーション向けの環境である PSpice for TI (...)
    パッケージ ピン数 ダウンロード
    TSSOP (PW) 24 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ