SPI インターフェイス付き 1MSPS 超低消費電力、超小型 SAR(逐次比較型)12 ビット ADC
製品の詳細
パラメータ
パッケージ|ピン|サイズ
特長
- Industry’s First SAR ADC with Nanowatt Power Consumption:
- 234 µW at 1 MSPS with 1.8-V AVDD
- 690 µW at 1 MSPS with 3-V AVDD
- 69 µW at 100 kSPS with 3-V AVDD
- Less than 1 µW at 1 kSPS with 3-V AVDD
- Industry’s Smallest SAR ADC:
- X2QFN-8 Package with 2.25-mm2 Footprint
- 1-MSPS Throughput with Zero Data Latency
- Wide Operating Range:
- AVDD: 1.65 V to 3.6 V
- DVDD: 1.65 V to 3.6 V (Independent of AVDD)
- Temperature Range: –40°C to 125°C
- Excellent Performance:
- 12-Bit Resolution with NMC
- ±1-LSB (Max) DNL and INL
- 70-dB SNR with 3-V AVDD
- –80-dB THD with 3-V AVDD
- Unipolar Input Range: 0 V to AVDD
- Integrated Offset Calibration
- SPI™-Compatible Serial Interface: 16 MHz
- JESD8-7A Compliant Digital I/O
概要
The ADS7042 is a 12-bit, 1-MSPS, analog-to-digital converter (ADC). The device supports a wide analog input voltage range (1.65 V to 3.6 V) and includes a capacitor-based, successive-approximation register (SAR) ADC with an inherent sample-and-hold circuit. The SPI-compatible serial interface is controlled by the CS and SCLK signals. The input signal is sampled with the CS falling edge and SCLK is used for conversion and serial data output. The device supports a wide digital supply range (1.65 V to 3.6 V), enabling direct interface to a variety of host controllers. The ADS7042 complies with the JESD8-7A standard for normal DVDD range (1.65 V to 1.95 V).
The ADS7042 is available in 8-pin, miniature, leaded, and X2QFN packages and is specified for operation from –40°C to 125°C. Miniature form-factor and extremely low-power consumption make this device suitable for space-constrained, battery-powered applications.
技術資料
設計と開発
追加の事項や他のリソースを参照するには、以下のタイトルをクリックすると、詳細ページを表示できます。ハードウェア開発
概要
The ADS7042EVM-PDK is a platform for evaluation of the ADS7042 analog to Digital converter (ADC). The converter is an 12 bit single-ended Successive Approximation-Register (SAR) ADC with a maximum throughput of 1MSPS. The evaluation kit combines the ADS7042EVM board with a serial data capture card (...)
特長
- Contains support circuitry as a design example to match ADC performance
- 3.3-V slave serial peripheral interface (SPI)
- Onboard 5-V analog supply
- Onboard OPA835 (56-MHz bandwidth, Rail-to-Rail Out) ADC input drivers
- USB port for computer interface
概要
The ADS7042 Ultra-Low Power Data Acquisition BoosterPack is a stand-alone system that converts analog sensor data into digital SPI data using the TI ADS7042 Successive Approximation Register Analog-to-Digital Converter. This BoosterPack has been designed to be compatible with the TI (...)
特長
- Designed using the ADS7042 precision analog-to-digital converter, OPA316 precision ADC driver, and REF3330 precision voltage reference
- Nanowatt power consumption of the ADS7042 ADC when sampling at 1 KSPS
- ADC sampling rates betwen 1 KSPS and 1 MSPS
- SMA jack for optional external analog signal input
- (...)
概要
PLABS-SAR-EVM-PDK is an experimental platform used in conjunction with TI Precision Labs videos to gain a deeper understanding of successive approximation register (SAR) analog-to-digital converter (ADC) circuits. The evaluation module (EVM) platform contains two channels for common SAR (...)
特長
- Intuitive setup – PCB overlay shows the schematic
- No external power supply required
- Includes several coupon boards with different driving amplifier RC filters to facilitate experimentation
- Ships with PHI controller - provides convenient interface to EVM over USB 2.0 (or higher) for power delivery (...)
ソフトウェア開発
設計ツールとシミュレーション
設計とシミュレーション向けの環境である PSpice for TI を使用すると、内蔵のライブラリを活用して、複雑なミックスド・シグナル設計のシミュレーションを実施することができます。完成度の高い最終機器を設計し、レイアウトの確定や製造開始より前に、ソリューションのプロトタイプを製作することができます。この結果、市場投入期間の短縮と開発コストの削減を実現できます。
設計とシミュレーション向けのツールである PSpice for TI の環境内で、各種 TI デバイスの検索、製品ラインアップの参照、テスト・ベンチの起動、設計のシミュレーションを実施し、選定したデバイスをさらに分析することができます。また、複数の TI デバイスを組み合わせてシミュレーションを実行することもできます。
事前ロード済みの複数のモデルで構成されたライブラリ全体に加えて、PSpice for TI ツール内で各種 TI デバイスの最新の技術関連資料に簡単にアクセスすることもできます。開発中のアプリケーションに適したデバイスを選定できたことを確認した後、TI 製品の購入ページにアクセスして、その製品を購入することができます。
PSpice for TI を使用すると、回路の検討から設計の開発や検証まで、作業の進展に合わせて設計サイクルの各段階で、シミュレーションのニーズに適した各種ツールにアクセスできます。コスト不要で入手でき、開発を容易に開始できます。設計とシミュレーションに適した PSpice スイートをダウンロードして、今すぐ設計を開始してください。
開発の開始
- PSpice for TI シミュレータへのアクセスの申請
- ダウンロードとインストール
- シミュレーション方法説明ビデオのご視聴
特長
- Cadence の PSpice テクノロジーを活用
- デジタル・モデル・スイートが付属する事前インストール済みのライブラリを活用して、ワーストケース・タイミング分析を実現可能
- 動的更新により、最新のデバイス・モデルに確実にアクセス可能
- 精度の低下を招かずに、シミュレーション速度を重視して最適化済み
- 複数製品の同時分析をサポート
- OrCAD Capture フレームワークを土台とし、業界で最も幅広く使用されている回路図のキャプチャとシミュレーションの環境へのアクセスを実現
- オフライン作業が可能
- 以下の点を含め、多様な動作条件とデバイス公差にまたがって設計を検証
- 自動的な測定と後処理
- モンテカルロ分析法
- ワーストケース分析
- 熱解析
特長
- A/D コンバータ(ADC)と D/A コンバータ(DAC)の回路設計を迅速化
- ノイズの計算
- 一般的な単位変換
- アンプ回路設計の一般的な問題を解決
- 標準的な抵抗を使用してゲインを選択
- フィルタの構成
- 一般的なアンプ構成の総ノイズ
- PCB 寄生成分の計算(R、L、C など)
- 一般的なセンサのセンサ出力値の算定(RTD、熱電対など)
- 受動回路の一般的な問題を解決(受動部品を使用する電圧デバイダなど)
リファレンス・デザイン
設計ファイル
-
download TIPD197 BOM.pdf (193KB)
(...)
設計ファイル
-
download TIPD168 BOM.pdf (93KB) -
download TIPD168 Gerber.zip (3361KB)
CAD/CAE シンボル
パッケージ | ピン数 | ダウンロード |
---|---|---|
VSSOP (DCU) | 8 | オプションの表示 |
X2QFN (RUG) | 8 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL rating/ リフローピーク温度
- MTBF/FIT の推定値
- 原材料組成
- 認定試験結果
- 継続的な信頼性モニタ試験結果
おすすめの製品には、この TI 製品に関連するパラメータ、評価モジュール、またはリファレンス・デザインが含まれている場合があります。