DRV8301

アクティブ

降圧レギュレータと電流シャント・アンプと SPI 搭載、最大 65V の 3 相ゲート・ドライバ

製品詳細

Rating Catalog Architecture Gate driver Control interface 3xPWM, 6xPWM Gate drive (A) 1.7 Vs (min) (V) 6 Vs ABS (max) (V) 65 Features Buck Step Down Converter, Current sense Amplifier, SPI/I2C Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control interface 3xPWM, 6xPWM Gate drive (A) 1.7 Vs (min) (V) 6 Vs ABS (max) (V) 65 Features Buck Step Down Converter, Current sense Amplifier, SPI/I2C Operating temperature range (°C) -40 to 125
HTSSOP (DCA) 56 113.4 mm² 14 x 8.1
  • 6-V to 60-V Operating Supply Voltage Range
  • 1.7-A Source and 2.3-A Sink Gate Drive Current
    Capability
  • Slew Rate Control for EMI Reduction
  • Bootstrap Gate Driver With 100% Duty Cycle
    Support
  • 6- or 3-PWM Input Modes
  • Dual Integrated Current Shunt Amplifiers With
    Adjustable Gain and Offset
  • Integrated 1.5-A Buck Converter
  • 3.3-V and 5-V Interface Support
  • SPI
  • Protection Features:
    • Programmable Dead Time Control (DTC)
    • Programmable Overcurrent Protection (OCP)
    • PVDD and GVDD Undervoltage Lockout
      (UVLO)
    • GVDD Overvoltage Lockout (OVLO)
    • Overtemperature Warning/Shutdown
      (OTW/OTS)
    • Reported Through nFAULT, nOCTW, and SPI
      Registers
  • 6-V to 60-V Operating Supply Voltage Range
  • 1.7-A Source and 2.3-A Sink Gate Drive Current
    Capability
  • Slew Rate Control for EMI Reduction
  • Bootstrap Gate Driver With 100% Duty Cycle
    Support
  • 6- or 3-PWM Input Modes
  • Dual Integrated Current Shunt Amplifiers With
    Adjustable Gain and Offset
  • Integrated 1.5-A Buck Converter
  • 3.3-V and 5-V Interface Support
  • SPI
  • Protection Features:
    • Programmable Dead Time Control (DTC)
    • Programmable Overcurrent Protection (OCP)
    • PVDD and GVDD Undervoltage Lockout
      (UVLO)
    • GVDD Overvoltage Lockout (OVLO)
    • Overtemperature Warning/Shutdown
      (OTW/OTS)
    • Reported Through nFAULT, nOCTW, and SPI
      Registers

The DRV8301 is a gate driver IC for three-phase motor drive applications. The device provides three half-bridge drivers, each capable of driving two Nchannel MOSFETs. The DRV8301 supports up to 1.7-A source and 2.3-A peak current capability. The DRV8301 can operate off of a single power supply with a wide range from 6-V to 60-V. The device uses a bootstrap gate driver architecture with trickle charge circuitry to support 100% duty cycle. The DRV8301 uses automatic handshaking when the high-side or low-side MOSFET is switching to prevent flow of current. Integrated VDS sensing of the high-side and low-side MOSFETs is used to protect the external power stage against overcurrent conditions.

The DRV8301 includes two current shunt amplifiers for accurate current measurement. The amplifiers support bidirectional current sensing and provide an adjustable output offset up to 3 V.

The DRV8301 also includes an integrated switching mode buck converter with adjustable output and switching frequency. The buck converter can provide up to 1.5 A to support MCU or additional system power needs.

The SPI provides detailed fault reporting and flexible parameter settings such as gain options for the current shunt amplifiers and slew rate control of the gate drivers.

The DRV8301 is a gate driver IC for three-phase motor drive applications. The device provides three half-bridge drivers, each capable of driving two Nchannel MOSFETs. The DRV8301 supports up to 1.7-A source and 2.3-A peak current capability. The DRV8301 can operate off of a single power supply with a wide range from 6-V to 60-V. The device uses a bootstrap gate driver architecture with trickle charge circuitry to support 100% duty cycle. The DRV8301 uses automatic handshaking when the high-side or low-side MOSFET is switching to prevent flow of current. Integrated VDS sensing of the high-side and low-side MOSFETs is used to protect the external power stage against overcurrent conditions.

The DRV8301 includes two current shunt amplifiers for accurate current measurement. The amplifiers support bidirectional current sensing and provide an adjustable output offset up to 3 V.

The DRV8301 also includes an integrated switching mode buck converter with adjustable output and switching frequency. The buck converter can provide up to 1.5 A to support MCU or additional system power needs.

The SPI provides detailed fault reporting and flexible parameter settings such as gain options for the current shunt amplifiers and slew rate control of the gate drivers.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
DRV8323R アクティブ 降圧レギュレータ / 電流シャント・アンプ搭載、最大 65V の 3 相スマート・ゲート・ドライバ Features 3 current sense amplifiers and slew rate tuning with smart gate drive

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8301 Three-Phase Gate Driver With Dual Current Shunt Amplifiers and Buck Regulator データシート (Rev. F) PDF | HTML 2016年 1月 26日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Hardware Design Considerations for an Electric Bicycle using BLDC Motor (Rev. B) 2021年 6月 23日
アプリケーション・ノート System Design Considerations for High-Power Motor Driver Applications PDF | HTML 2021年 6月 22日
ホワイト・ペーパー Power Electronics in Motor Drives: Where is it? (Rev. A) 2019年 10月 1日
アプリケーション・ノート Hardware Design Considerations for an Efficient Vacuum Cleaner Using a BLDC Moto (Rev. B) PDF | HTML 2019年 3月 6日
技術記事 Motor start-up techniques: Part three PDF | HTML 2015年 6月 26日
ユーザー・ガイド BOOSTXL-DRV8301 Hardware User's Guide 2013年 10月 31日
e-Book(PDF) BOOSTXL-DRV8301 Quick Start Guide 2013年 10月 14日
アプリケーション・ノート DRV8301 Current Limiting Mode Layout Considerations 2012年 12月 4日
アプリケーション・ノート InstaSPIN(tm) BLDC Lab 2011年 11月 15日
アプリケーション・ノート Sensored 3-Phase BLDC Motor Control Using MSP430 2011年 7月 20日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

BOOSTXL-DRV8301 — DRV8301 と複数の NexFET™ MOSFET を採用したモーター・ドライブ・ブースタパック

BOOSTXL-DRV8301 は、DRV8301 プリドライバと CSD18533Q5A NexFET™ パワー MOSFET をベースとして、10A を供給する 3 相ブラシレス DC ドライブ段です。この基板は、3 個のローサイド電流センス・アンプを搭載しています (2 個は内部で DRV8301 に接続、1 個は外部)。また、この基板は 1.5A 降圧コンバータを採用し、短絡、過熱、貫通電流に対する包括的な保護機能を搭載しており、SPI (...)

ユーザー ガイド: PDF | HTML
アプリケーション・ソフトウェアとフレームワーク

INSTASPIN-BLDC — InstaSPIN-BLDC ソリューション

InstaSPIN-BLDCは、モーター制御をより使いやすくするモーター制御テクノロジーです。低コストの BLDC アプリケーションを対象とした InstaSPIN-BLDC は、「シンプルな方が良い」という理念のセンサレス制御技術です。50 種類を超えるモーターを使用したフィールド・テストでは、InstaSPIN-BLDC はどのモーターも 20 秒未満で起動し、動作させることができました。堅牢性の理由として、InstaSPIN-BLDC では、1 つのチューニング値を調整するだけで、操作するモーター・パラメータに関する知識が不要ということが挙げられます。

(...)

シミュレーション・モデル

DRV8301 IBIS Model

SLOM252.ZIP (142 KB) - IBIS Model
シミュレーション・モデル

DRV8301 TINA-TI Reference Design

SPNM069.TSC (265 KB) - TINA-TI Reference Design
シミュレーション・モデル

DRV8301 TINA-TI Spice Model

SPNM068.ZIP (2324 KB) - TINA-TI Spice Model
リファレンス・デザイン

TIDM-THREEPHASE-BLDC-HC-SPI-INST — InstaSPIN ソフトウェア付き 3 相ブラシレス / PMSM 高電流モータ制御ソリューション

このリファレンス・デザインは、3 相ブラシレス DC (BLDC) モーター、および永久磁石同期モーター (PMSM) とも呼ばれるブラシレス AC (BLAC) モーターの駆動に最適なモーター制御ソリューションを提示します。このリファレンス・デザインは、ROM 内に InstaSPIN-FOC と InstaSPIN-MOTION を搭載した C2000™ Piccolo™ マイコンと、DRV8301 3 相モーター・ドライバを採用しています。3 個のハーフブリッジ・ドライバを搭載しており、それぞれ、ハイサイド用 1 個とローサイド用 1 個、合計 2 個の N (...)
ユーザー ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDM-LPBP-BLDCMOTORDRIVE — 3 相ブラシレス DC モーター・ドライバ

この三相ブラシレス DC モーター・ドライバのリファレンス・デザインは、DRV8301 プリドライバと CSD18533Q5A NextFET™ パワー MOSFET をベースとした 10A 三相ブラシレス DC ドライブ段です。上限側電流センス・アンプを 3 個備えています(2 個は内部で DRV8301 に接続、1 個は外部)。また、この設計は 1.5A 降圧コンバータを使用しており、短絡、発熱、貫通電流に対して完全な保護機能を備え、構成処理は SPI インターフェイス経由で簡単に実行できます。センサレス、ブラシレスの制御技法およびドライブ段設計に最適です。
回路図: PDF
リファレンス・デザイン

TIDM-THREEPHASE-BLDC-HC-SPI — 3 相ブラシレス/PMSM 高電流モータ制御ソリューション、SPI 付き

This reference design demonstrates a motor control solution for spinning three-phase brushless DC (BLDC) and brushless AC (BLAC) - often referred to as permanent magnet synchronous (PMSM) - motors featuring the C2000™ Piccolo™ microcontroller and the DRV8301 three-phase motor driver. It (...)
ユーザー ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (DCA) 56 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ