DRV8307
- Three-Phase Brushless DC Motor Controller
- Single PWM Input Controls Speed
- Operating Supply Voltage 8.5 to 32 V
- 30-mA Gate-Drive Current to 6 N-Channel MOSFETs
- Integrated Current Sense Amplifier
- 5-V Regulator for Hall Sensors
- Low-Power Standby Mode
- Locked Rotor Detection and Restart
- Integrated Overcurrent and Overtemperature Protection
- 6- × 6-mm VQFN Package, 0.5-mm Pitch
The DRV8307 is a three half-bridge pre-driver that drives six N-type MOSFETs 30 mA with a single power supply. Aimed at sensored three-phase brushless DC motors, the DRV8307 is driven by a single PWM input and supports integrated commutation logic with three Hall sensor inputs. A separate 5-V regulator is also included to be used to power Hall-effect sensors and other external components.
The DRV8307 includes a current sense input for current limiting and protection. The current limit can be set by adjusting the value of the RISENSE sense resistor.
Motor operation (start and stop) is controlled through the ENABLEn terminal. If the ENABLEn terminal is set high and motor rotation has stopped, the device enters into a low-power standby state, thereby conserving overall system power during periods of inactivity.
Protection features are also included in the DRV8307 device such as locked rotor detection, as well as overcurrent and overtemperature protection and undervoltage lockout to bolster overall system robustness and reliability.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | DRV8307 Brushless DC Motor Controller データシート (Rev. A) | PDF | HTML | 2016年 2月 2日 | ||
アプリケーション・ノート | モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) | PDF | HTML | 英語版 (Rev.B) | PDF | HTML | 2021年 10月 14日 | |
アプリケーション・ノート | Hardware Design Considerations for an Electric Bicycle using BLDC Motor (Rev. B) | 2021年 6月 23日 | ||||
アプリケーション・ノート | System Design Considerations for High-Power Motor Driver Applications | PDF | HTML | 2021年 6月 22日 | |||
アプリケーション・ノート | Understanding Smart Gate Drive (Rev. D) | 2021年 3月 1日 | ||||
アプリケーション・ノート | スマート・ゲート・ドライブについて (Rev. C 翻訳版) | 最新英語版 (Rev.D) | 2020年 7月 9日 | |||
アプリケーション・ノート | Hardware Design Considerations for an Efficient Vacuum Cleaner Using a BLDC Moto (Rev. B) | PDF | HTML | 2019年 3月 6日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
DRV8307EVM — DRV8307 evaluation module for three-phase brushless DC motor pre-driver
The three-phase brushless motor pre-driver DRV8307 can drive brushless DC and brushless AC (BLAC) - often referred to as permanent magnet synchronous (PMSM). Aimed at 12V and 24V motors, this simple pre-driver features a PWM current control interface, three Hall sensor inputs, and locked (...)
DRV8307 TINA-TI DIR0 Transient Reference Design
DRV8307 TINA-TI DIR1 Transient Reference Design
DRV8307 Unencrypted PSpice Transient Model (Rev. B)
TIDA-00196 — ブラシレス DC モータ
パッケージ | ピン数 | ダウンロード |
---|---|---|
VQFN (RHA) | 40 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点