DRV8711

アクティブ

1/256 マイクロステップ機能と停止検出機能搭載、52V、バイポーラ・ステッパ・モーター・ゲート・ドライバ

製品詳細

Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 60 Sleep current (µA) 65 Control mode PWM, STEP/DIR Control interface Hardware (GPIO), SPI Microstepping levels 256 Features Stall Detection, Voltage Regulator Rating Catalog Operating temperature range (°C) -40 to 85
Number of full bridges 2 Vs (min) (V) 8 Vs ABS (max) (V) 60 Sleep current (µA) 65 Control mode PWM, STEP/DIR Control interface Hardware (GPIO), SPI Microstepping levels 256 Features Stall Detection, Voltage Regulator Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (DCP) 38 62.08 mm² 9.7 x 6.4
  • Pulse width modulation (PWM) microstepping motor driver
    • Built-In 1/256-Step microstepping indexer
    • Drives external N-Channel MOSFETs
    • Optional STEP/DIR pins
    • Optional PWM control interface for DC motors
  • Flexible decay modes, including automatic mixed decay mode
  • Stall detection with optional BEMF output
  • Highly configurable SPI serial interface
  • Internal reference and torque DAC
  • 8-V to 52-V Operating supply voltage range
  • Scalable output current
  • Thermally enhanced surface-mount package
  • 5-V Regulator capable of 10-mA load
  • Protection and diagnostic features
    • Overcurrent protection (OCP)
    • Overtemperature shutdown (OTS)
    • Undervoltage lockout (UVLO)
    • Individual fault condition indication bits
    • Fault condition indication pin
  • Pulse width modulation (PWM) microstepping motor driver
    • Built-In 1/256-Step microstepping indexer
    • Drives external N-Channel MOSFETs
    • Optional STEP/DIR pins
    • Optional PWM control interface for DC motors
  • Flexible decay modes, including automatic mixed decay mode
  • Stall detection with optional BEMF output
  • Highly configurable SPI serial interface
  • Internal reference and torque DAC
  • 8-V to 52-V Operating supply voltage range
  • Scalable output current
  • Thermally enhanced surface-mount package
  • 5-V Regulator capable of 10-mA load
  • Protection and diagnostic features
    • Overcurrent protection (OCP)
    • Overtemperature shutdown (OTS)
    • Undervoltage lockout (UVLO)
    • Individual fault condition indication bits
    • Fault condition indication pin

The DRV8711 device is a stepper motor controller that uses external N-channel MOSFETs to drive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated, which is capable of step modes from full step to 1/256-step.

An ultra-smooth motion profile can be achieved using adaptive blanking time and various current decay modes, including an auto-mixed decay mode. Motor stall is reported with an optional back-EMF output.

A simple step/direction or PWM interface allows easy interfacing to controller circuits. A SPI serial interface is used to program the device operation. Output current (torque), step mode, decay mode, and stall detection functions are all programmable through a SPI serial interface.

Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature. Fault conditions are indicated through a FAULTn pin, and each fault condition is reported through a dedicated bit through SPI.

The DRV8711 is packaged in a PowerPAD™ 38-pin HTSSOP package with thermal pad (Eco-friendly: RoHS and no Sb/Br).

The DRV8711 device is a stepper motor controller that uses external N-channel MOSFETs to drive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated, which is capable of step modes from full step to 1/256-step.

An ultra-smooth motion profile can be achieved using adaptive blanking time and various current decay modes, including an auto-mixed decay mode. Motor stall is reported with an optional back-EMF output.

A simple step/direction or PWM interface allows easy interfacing to controller circuits. A SPI serial interface is used to program the device operation. Output current (torque), step mode, decay mode, and stall detection functions are all programmable through a SPI serial interface.

Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature. Fault conditions are indicated through a FAULTn pin, and each fault condition is reported through a dedicated bit through SPI.

The DRV8711 is packaged in a PowerPAD™ 38-pin HTSSOP package with thermal pad (Eco-friendly: RoHS and no Sb/Br).

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
13 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート DRV8711 Stepper Motor Controller IC データシート (Rev. H) PDF | HTML 2020年 4月 22日
アプリケーション・ノート モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) PDF | HTML 英語版 (Rev.B) PDF | HTML 2021年 10月 14日
アプリケーション・ノート Understanding Smart Gate Drive (Rev. D) 2021年 3月 1日
アプリケーション・ノート スマート・ゲート・ドライブについて (Rev. C 翻訳版) 最新英語版 (Rev.D) 2020年 7月 9日
アプリケーション・ノート PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
EVM ユーザー ガイド (英語) DRV8711 EVM GUI (Rev. C) 2017年 4月 26日
技術記事 New simple open real-time Ethernet (SORTE) protocol supports 4µs cycle time PDF | HTML 2016年 11月 21日
その他の技術資料 TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
技術記事 Simplifying gate driver design for brushed DC motors PDF | HTML 2015年 6月 30日
技術記事 How to spin your stepper motor more efficiently – Part 2 PDF | HTML 2015年 5月 22日
技術記事 How to spin your stepper motor more efficiently, Part 1 PDF | HTML 2015年 5月 7日
アプリケーション・ノート DRV8711 Decay Mode Setting Optimization 2014年 2月 26日
アプリケーション概要 PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

BOOST-DRV8711 — ステッパ・モータ BoosterPack、DRV8711 および CSD88537ND 使用

BOOST-DRV8711 は、DRV8711 ステッパ・モーター・プリドライバと CSD88537ND デュアル N チャネル NexFETTM パワー MOSFET をベースとした 8 ~ 52V、4.5A のバイポーラ・ステッパ・モーター・ドライブ段です。このモジュールには、多様なバイポーラ・ステッパ・モーターを駆動するために必要なすべての機能が搭載されており、用途を変更してデュアル・ブラシ付き DC モーター・ドライバとして活用することもできます。BOOST-DRV8711 (...)

ユーザー ガイド: PDF
評価ボード

DRV8711EVM — ステッパ・モーター・プレドライバ用評価モジュール、オンチップ 1/256 マイクロステッピング・インデクサ付き

The DRV8711 is a stepper motor controller using external N-channel MOSFETs to drive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated, supporting up to 1/256 microstep. The DRV8711 is capable of providing ultra-smooth motion profile, and motor stall can be (...)

ユーザー ガイド: PDF
サポート・ソフトウェア

SLVC500 DRV8711 Software

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
ステッパ・モーター・ドライバ
DRV8711 1/256 マイクロステップ機能と停止検出機能搭載、52V、バイポーラ・ステッパ・モーター・ゲート・ドライバ
ハードウェア開発
評価ボード
DRV8711EVM ステッパ・モーター・プレドライバ用評価モジュール、オンチップ 1/256 マイクロステッピング・インデクサ付き
リファレンス・デザイン

TIDA-00872 — バイポーラ・ステッパ・モーター・コントローラを使用するユニポーラ・ステッパ・モーター、リファレンス・デザイン

TIDA-00872 demonstrates how to reconfigure the DRV8711 bipolar stepper motor gate driver as a unipolar stepper motor gate driver. The PCB connects to the MSP430G2 LaunchPad to allow quick evaluation and tuning. The PCB operates from 15V up to 40V, with full scale current of 5A.
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00740 — 自動トルク実装リファレンス・デザイン

The TIDA-00740 is an 8-52V, 4.5A, bipolar stepper motor drive stage based on the DRV8711 Stepper Motor Pre-driver and CSD88537ND Dual N-Channel NexFET™ Power MOSFET. Firmware on an MSP430G2553 is used to automatically adjust the stepper motor current based on the Back-EMF generated by the (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (DCP) 38 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ