ホーム パワー・マネージメント バッテリ管理 IC バッテリ・モニタとバランサ

EMB1428Q

アクティブ

アクティブ・セル・バランシング向け、スイッチ・マトリクス・ゲート・ドライバ

製品詳細

Number of series cells (min) 6 Vin (max) (V) 5.5 Features Cell balancing, Multi-cell support, Stackable (built-in interface) Device type Cell monitor and balancer Number of series cells (max) 14 Operating temperature range (°C) -40 to 125 Rating Automotive Communication interface SPI Operating current (typ) (µA) 750
Number of series cells (min) 6 Vin (max) (V) 5.5 Features Cell balancing, Multi-cell support, Stackable (built-in interface) Device type Cell monitor and balancer Number of series cells (max) 14 Operating temperature range (°C) -40 to 125 Rating Automotive Communication interface SPI Operating current (typ) (µA) 750
WQFN (RHS) 48 49 mm² 7 x 7
  • 60V Maximum Stack Operating Voltage
  • Twelve (12) Floating Gate Drivers
  • SPI Bus Interface (for Charge/discharge
    Commands and Fault Reporting)
  • Low Power Mode
  • EMB1428Q is an Automotive Grade Product
    that is AEC-Q100 Grade 1 Qualified
    (–40°C to +125°C Operating
    Junction Temperature)
  • 60V Maximum Stack Operating Voltage
  • Twelve (12) Floating Gate Drivers
  • SPI Bus Interface (for Charge/discharge
    Commands and Fault Reporting)
  • Low Power Mode
  • EMB1428Q is an Automotive Grade Product
    that is AEC-Q100 Grade 1 Qualified
    (–40°C to +125°C Operating
    Junction Temperature)

The EMB1428 Switch Matrix Gate Driver IC is designed to work in conjunction with EMB1499 DC/DC Controller IC to support TI’s switch matrix based active cell balancing scheme in a battery management system. The EMB1428 provides 12 floating MOSFET gate drivers necessary for balancing up to 7 battery cells connected in a series stack. Multiple EMB1428 ICs may be used together to balance a stack of more than seven battery cells.

The EMB1428 integrated circuit interfaces with the EMB1499 DC/DC controller to control and enable charging and discharging modes. The EMB1428 uses an SPI bus to accept commands from the main controller (CPU/MCU) on which battery cell should be charged or discharged and to report back any faults to the main controller (CPU/MCU).

The EMB1428 Switch Matrix Gate Driver IC is designed to work in conjunction with EMB1499 DC/DC Controller IC to support TI’s switch matrix based active cell balancing scheme in a battery management system. The EMB1428 provides 12 floating MOSFET gate drivers necessary for balancing up to 7 battery cells connected in a series stack. Multiple EMB1428 ICs may be used together to balance a stack of more than seven battery cells.

The EMB1428 integrated circuit interfaces with the EMB1499 DC/DC controller to control and enable charging and discharging modes. The EMB1428 uses an SPI bus to accept commands from the main controller (CPU/MCU) on which battery cell should be charged or discharged and to report back any faults to the main controller (CPU/MCU).

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
4 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート EMB1428Q Switch Matrix Gate Driver データシート (Rev. A) 2013年 5月 2日
ユーザー・ガイド Active Chipset Reference Design Guide (Rev. A) 2017年 9月 5日
ユーザー・ガイド EM1402 Evaluation Module PDF | HTML 2017年 2月 1日
技術記事 How batteries may make travel on Mars easier PDF | HTML 2016年 1月 27日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

パッケージ ピン数 ダウンロード
WQFN (RHS) 48 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ