ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧 コントローラ (外部スイッチ)

LM25117-Q1

アクティブ

車載グレード、トラッキング機能搭載、4.5 ~ 42V の広い入力電圧範囲 (Vin)、電流モード、同期整流降圧コントローラ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LM25141-Q1 アクティブ 車載、周波数スペクトラム拡散機能搭載、2.2MHz、低静止電流 (IQ)、同期整流降圧コントローラ Improved EMI performance, efficiency and lower IQ.

製品詳細

Vin (min) (V) 4.5 Vin (max) (V) 42 Vout (min) (V) 0.8 Vout (max) (V) 41 Iout (max) (A) 20 Iq (typ) (mA) 4.8 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 750 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Synchronous Rectification, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Number of phases 1 Rating Automotive Control mode current mode Type Controller
Vin (min) (V) 4.5 Vin (max) (V) 42 Vout (min) (V) 0.8 Vout (max) (V) 41 Iout (max) (A) 20 Iq (typ) (mA) 4.8 Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 750 Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Synchronous Rectification, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 125 Regulated outputs (#) 1 Number of phases 1 Rating Automotive Control mode current mode Type Controller
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4 WQFN (RTW) 24 16 mm² 4 x 4
  • LM25117-Q1 is Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: -40°C to 125°C Ambient Operating Temperature Range
  • Emulated Peak Current Mode Control
  • Wide Operating Range from 4.5 V to 42 V
  • Robust 3.3 A Peak Gate Drives
  • Adaptive Dead-time Output Driver Control
  • Free-run or Synchronizable Clock up to 750 kHz
  • Optional Diode Emulation Mode
  • Programmable Output from 0.8 V
  • Precision 1.5% Voltage Reference
  • Analog Current Monitor
  • Programmable Current Limit
  • Hiccup Mode Over Current Protection
  • Programmable Soft-start and Tracking
  • Programmable Line Undervoltage Lockout
  • Programmable Switch-over to External Bias Supply
  • Thermal Shutdown
  • LM25117-Q1 is Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: -40°C to 125°C Ambient Operating Temperature Range
  • Emulated Peak Current Mode Control
  • Wide Operating Range from 4.5 V to 42 V
  • Robust 3.3 A Peak Gate Drives
  • Adaptive Dead-time Output Driver Control
  • Free-run or Synchronizable Clock up to 750 kHz
  • Optional Diode Emulation Mode
  • Programmable Output from 0.8 V
  • Precision 1.5% Voltage Reference
  • Analog Current Monitor
  • Programmable Current Limit
  • Hiccup Mode Over Current Protection
  • Programmable Soft-start and Tracking
  • Programmable Line Undervoltage Lockout
  • Programmable Switch-over to External Bias Supply
  • Thermal Shutdown

The LM25117 is a synchronous buck controller intended for step-down regulator applications from a high voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage applications.

The operating frequency is programmable from 50 kHz to 750 kHz. The LM25117 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation for improved efficiency at light load conditions. A high voltage bias regulator that allows external bias supply further improves efficiency. The LM25117’s unique analog telemetry feature provides average output current information. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit and adjustable line undervoltage lockout.

The LM25117 is a synchronous buck controller intended for step-down regulator applications from a high voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage applications.

The operating frequency is programmable from 50 kHz to 750 kHz. The LM25117 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation for improved efficiency at light load conditions. A high voltage bias regulator that allows external bias supply further improves efficiency. The LM25117’s unique analog telemetry feature provides average output current information. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit and adjustable line undervoltage lockout.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
7 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM25117/Q1 Wide Input Range Synchronous Buck Controller With Analog Current Monitor データシート (Rev. F) PDF | HTML 2015年 8月 27日
ホワイト・ペーパー Valuing wide VIN, low EMI synchronous buck circuits for cost-driven, demanding a (Rev. A) 2019年 4月 10日
ホワイト・ペーパー Overcoming Challenges in Designing Step-Dwn Reg Apps w/40V Input Voltage (Rev. A) 2018年 7月 3日
ホワイト・ペーパー コストが重視される、要求の厳しいアプリケーション向けのワイドVin、低EMIの同期整流方式降圧型回路の評価 最新英語版 (Rev.A) 2017年 1月 31日
Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 2016年 7月 21日
ユーザー・ガイド AN-2065 LM5119 Evaluation Board (Rev. B) 2013年 4月 24日
ユーザー・ガイド AN-2103 LM5117 Evaluation Board (Rev. B) 2013年 4月 24日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM25117EVAL — LM25117 評価ボード

The LM25117 evaluation board provides the design engineer with a fully functional synchronous buck converter based on Emulated Current Mode Control to evaluate the LM25117 controller IC. The evaluation board provides 3.3V output with a 9A current capability in addition with average output current (...)

ユーザー ガイド: PDF
シミュレーション・モデル

LM25117 PSpice Average Model

SNVM385.ZIP (51 KB) - PSpice Model
シミュレーション・モデル

LM25117 PSpice Transient Model (Rev. A)

SNVM386A.ZIP (167 KB) - PSpice Model
シミュレーション・モデル

LM25117 TINA-TI Average Reference Design (Rev. A)

SNVM488A.TSC (148 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM25117 TINA-TI Average Spice Model (Rev. A)

SNVM489A.ZIP (8 KB) - TINA-TI Spice Model
シミュレーション・モデル

LM25117 TINA-TI Transient Reference Design(Load transient)

SNVM490.TSC (196 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM25117 TINA-TI Transient Reference Design(START UP)

SNVM491.TSC (226 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM25117 TINA-TI Transient Spice Model

SNVM492.ZIP (19 KB) - TINA-TI Spice Model
シミュレーション・モデル

LM25117 Unencrypted PSpice Average Model

SNVM864.ZIP (2 KB) - PSpice Model
シミュレーション・モデル

LM25117 Unencrypted PSpice Transient Model

SNVM860.ZIP (6 KB) - PSpice Model
計算ツール

LM25117-5117QUICK-CALC — LM(2)5117 クイック・スタート・カリキュレータ

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-00675 — ダイナミック・スイッチングを使用する消費電力削減、リファレンス・デザイン

TIDA-00675 は、1 個のロード・スイッチを使用して負荷の動的なオン / オフ切り替えを行う場合の電力低減の利点を示します。設計ガイド (英語) は、切り替えの頻度、デューティ・サイクル、放電抵抗の使用が、消費電力にのどのような影響を及ぼすかを説明しています。
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00160 — 車載用 USB チャージャ、リニア・ドロップ補償付き、リファレンス・デザイン

TIDA-00160 リファレンス・デザインは、USB チャージャを評価および検証するための詳細なデータを提供するもので、USB 充電コントローラ、降圧コントローラ、シャント・アンプによって形成されています。

この設計は、バッテリ短絡の保護対策を実装した車載 USB 充電ポートの実例を示します。この設計はシャント・アンプを活用し、およそ 2 ~ 3m の長さのケーブルを使用してスマートフォン/タブレットを USB チャージャに接続したときに発生する Vdroop(電圧降下)の効果を補正することを意図しています。

設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
HTSSOP (PWP) 20 オプションの表示
WQFN (RTW) 24 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ