ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

LM26003

アクティブ

3A、スイッチング・レギュレータ、高効率スリープ・モード付き

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
LMQ66430 アクティブ 1.5μA の静止電流 (IQ)、低 EMI、36V、3A 同期整流降圧コンバータ Integrated input bypass capacitor and boot cap for lower EMI and smaller footprint, dual-random spread spectrum and lower IQ.

製品詳細

Vin (min) (V) 3 Vin (max) (V) 38 Vout (min) (V) 1.25 Vout (max) (V) 35 Iout (max) (A) 3 Iq (typ) (mA) 0.04 Switching frequency (min) (kHz) 150 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
Vin (min) (V) 3 Vin (max) (V) 38 Vout (min) (V) 1.25 Vout (max) (V) 35 Iout (max) (A) 3 Iq (typ) (mA) 0.04 Switching frequency (min) (kHz) 150 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up Operating temperature range (°C) -40 to 125 Rating Catalog Regulated outputs (#) 1 Control mode current mode Duty cycle (max) (%) 98 Type Converter
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4

  • LM26003Q is an Automotive Grade product that is AEC-Q100 grade 1 qualified (-40°C to +125°C operating junction temperature)
  • High efficiency sleep mode
  • 40 µA typical Iq in sleep mode
  • 10.8 µA typical Iq in shutdown mode
  • 3.0V minimum input voltage
  • 4.0V to 38V continuous input range
  • 1.5% reference accuracy
  • Cycle-by-cycle current limit
  • Adjustable Frequency (150 kHz to 500 kHz)
  • Synchronizable to an external clock
  • Power Good Flag
  • Forced PWM function
  • Adjustable Soft-start
  • TSSOP-20 exposed pad package
  • Thermal Shut Down

  • LM26003Q is an Automotive Grade product that is AEC-Q100 grade 1 qualified (-40°C to +125°C operating junction temperature)
  • High efficiency sleep mode
  • 40 µA typical Iq in sleep mode
  • 10.8 µA typical Iq in shutdown mode
  • 3.0V minimum input voltage
  • 4.0V to 38V continuous input range
  • 1.5% reference accuracy
  • Cycle-by-cycle current limit
  • Adjustable Frequency (150 kHz to 500 kHz)
  • Synchronizable to an external clock
  • Power Good Flag
  • Forced PWM function
  • Adjustable Soft-start
  • TSSOP-20 exposed pad package
  • Thermal Shut Down

  • The LM26003 is a switching regulator designed for the high efficiency requirements of applications with stand-by modes. The device features a low-current sleep mode to maintain efficiency under light-load conditions and current-mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10.8 µA typically in shutdown mode and less than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.

    The LM26003 can deliver up to 3A of continuous load current with a fixed current limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0V to 38V and can operate with input voltages as low as 3V during line transients.

    Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock.

    Other features include Power good, adjustable soft-start, enable pin, input under-voltage protection, and an internal bootstrap diode for reduced component count.


    The LM26003 is a switching regulator designed for the high efficiency requirements of applications with stand-by modes. The device features a low-current sleep mode to maintain efficiency under light-load conditions and current-mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10.8 µA typically in shutdown mode and less than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.

    The LM26003 can deliver up to 3A of continuous load current with a fixed current limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0V to 38V and can operate with input voltages as low as 3V during line transients.

    Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock.

    Other features include Power good, adjustable soft-start, enable pin, input under-voltage protection, and an internal bootstrap diode for reduced component count.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    star =TI が選定したこの製品の主要ドキュメント
    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    5 をすべて表示
    種類 タイトル 最新の英語版をダウンロード 日付
    * データシート LM26003/LM26003Q 3A Switching Regulator with High Efficiency Sleep Mode (jp) データシート (Rev. C 翻訳版) 最新英語版 (Rev.F) PDF | HTML 2010年 11月 29日
    セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
    技術記事 Design an automotive cluster power supply PDF | HTML 2015年 10月 16日
    技術記事 Spread Spectrum: Headache tablet or vitamin pill? PDF | HTML 2015年 5月 18日
    EVM ユーザー ガイド (英語) AN-1884 LM26003 Evaluation Board (Rev. B) 2013年 4月 24日

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価ボード

    LM26003EVAL — LM26003 - 3A スイッチング・レギュレータ、高効率スリープ・モード付

    The LM26003 evaluation board is designed to demonstrate the capabilities of the LM26003 switching regulator. The LM26003 eval board can be configured to provide an output of 3.3V at up to 3A from the input range of 4V to 38V. The nominal operating frequency is 300kHz and can be synchronized from (...)

    ユーザー ガイド: PDF
    シミュレーション・モデル

    LM26003 PSpice Average Model

    SNVM185.ZIP (57 KB) - PSpice Model
    シミュレーション・モデル

    LM26003 Unencrypted PSpice Average Model

    SNVM874.ZIP (1 KB) - PSpice Model
    シミュレーション・ツール

    PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

    PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

    設計とシミュレーション向けの環境である PSpice for TI (...)
    リファレンス・デザイン

    PMP9458 — リファレンス・デザイン - CISPR 25 クラス 5 定格 14W 複数出力電源、オートモーティブ・クラスタ・ユニット用

    PMP9458 リファレンス・デザインは、伝導 EMI を最適化した、車載クラスタ・ユニット向けの 2 層基板電源です。この電源には、カスケード接続された 2 つの降圧レギュレータが含まれています。1 段目の降圧レギュレータでは LM26003 を使用して 5V/2A を、2 段目では LM26420 を使用して 2.8V/1.5A と 1.8V/2A の 2 つの出力を生成します(最大出力電力は合計 14W です)。LM26003 は Vin 範囲の広い非同期整流・降圧レギュレータで、LM26420 は 5V 入力、デュアル 2A (...)
    試験報告書: PDF
    回路図: PDF
    リファレンス・デザイン

    PMP9477 — CISPR 25 クラス 5 定格、複数出力電源、事前昇圧付、オートモーティブ・クラスタ・ユニット用

    PMP9477 は、伝導 EMI を最適化した、車載クラスタ・ユニット向けの複数出力電源です。  この電源には、コールド・クランクやスタート/ストップ動作向けの事前昇圧段と、2 つの降圧レギュレータが含まれています。事前昇圧段には LM3481 昇圧コントローラが採用されており、入力電圧が 9.5V 未満に降下すると動作が開始され、出力が 9.5V に調整されます。これにより、4.5V ~ 38V の幅広い入力電圧範囲に対応できるようになり、12V の自動車用バッテリ・システムに理想的な設計となります。この設計には、事前昇圧段に続いて 2 つの降圧レギュレータが含まれており、3 (...)
    試験報告書: PDF
    回路図: PDF
    パッケージ ピン数 ダウンロード
    HTSSOP (PWP) 20 オプションの表示

    購入と品質

    記載されている情報:
    • RoHS
    • REACH
    • デバイスのマーキング
    • リード端子の仕上げ / ボールの原材料
    • MSL 定格 / ピーク リフロー
    • MTBF/FIT 推定値
    • 材質成分
    • 認定試験結果
    • 継続的な信頼性モニタ試験結果
    記載されている情報:
    • ファブの拠点
    • 組み立てを実施した拠点

    推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ