ホーム パワー・マネージメント AC/DC & DC/DC converters (integrated FET)

LM34919C-Q1

アクティブ

車載向け、4.5 ~ 50V の広い入力電圧範囲 (Vin)、600mA、2.6MHz、超小型、コンスタント・オンタイム、非同期整流降圧レギュレータ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPS560430-Q1 アクティブ 車載認証済み、SIMPLE SWITCHER® 4V ~ 36V、600mA、同期整流降圧コンバータ PFM and PWM selectable options in an SOT-23 package.

製品詳細

Iout (max) (A) 0.6 Vin (min) (V) 4.5 Vin (max) (V) 50 Topology Buck Type Converter Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 2600 Features Enable, Power good, Soft Start Adjustable Control mode Constant on-time (COT) Vout (min) (V) 2.5 Vout (max) (V) 45 Rating Automotive Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0022
Iout (max) (A) 0.6 Vin (min) (V) 4.5 Vin (max) (V) 50 Topology Buck Type Converter Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 2600 Features Enable, Power good, Soft Start Adjustable Control mode Constant on-time (COT) Vout (min) (V) 2.5 Vout (max) (V) 45 Rating Automotive Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0022
DSBGA (YZR) 12 3.9375 mm² 2.25 x 1.75 WSON (DNT) 12 16 mm² 4 x 4
  • AEC-Q100 qualified (Tj = –40°C to 125°C)
  • Maximum Switching Frequency: 2.6 MHz
  • Input Voltage Range: 4.5 V to 50 V
  • Integrated N-Channel buck switch
  • Integrated Start-Up Regulator
  • No Loop Compensation Required
  • Ultra-Fast Transient Response
  • Operating Frequency Remains Constant with
    Load Current and Input Voltage
  • Adjustable Output Voltage
  • Power Good Output
  • Enable Input
  • Valley Current Limit at 0.64 A Typical
  • Precision Internal Voltage Reference
  • Low IQ Shutdown (<10 µA)
  • Highly Efficient Operation
  • Thermal Shutdown
  • 12-Bump 2 mm × 2 mm DSBGA and 12-pin 4
    mm × 4 mm WSON Packages
  • AEC-Q100 qualified (Tj = –40°C to 125°C)
  • Maximum Switching Frequency: 2.6 MHz
  • Input Voltage Range: 4.5 V to 50 V
  • Integrated N-Channel buck switch
  • Integrated Start-Up Regulator
  • No Loop Compensation Required
  • Ultra-Fast Transient Response
  • Operating Frequency Remains Constant with
    Load Current and Input Voltage
  • Adjustable Output Voltage
  • Power Good Output
  • Enable Input
  • Valley Current Limit at 0.64 A Typical
  • Precision Internal Voltage Reference
  • Low IQ Shutdown (<10 µA)
  • Highly Efficient Operation
  • Thermal Shutdown
  • 12-Bump 2 mm × 2 mm DSBGA and 12-pin 4
    mm × 4 mm WSON Packages

The LM34919C Step Down Switching Regulator features all of the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying 0.6 A to the load. This buck regulator contains an N-Channel Buck Switch and is available in DSBGA and WSON packages. The constant on-time feedback regulation scheme requires no loop compensation, results in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the on-time. The valley current limit results in a smooth transition from constant voltage to constant current mode when current limit is detected, reducing the frequency and output voltage, without the use of foldback. Additional features include: Power Good, enable, VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter.

The LM34919C Step Down Switching Regulator features all of the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying 0.6 A to the load. This buck regulator contains an N-Channel Buck Switch and is available in DSBGA and WSON packages. The constant on-time feedback regulation scheme requires no loop compensation, results in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the on-time. The valley current limit results in a smooth transition from constant voltage to constant current mode when current limit is detected, reducing the frequency and output voltage, without the use of foldback. Additional features include: Power Good, enable, VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM34919C-Q1 Ultra Small 50V, 600mA Const On-Time Buck Switchg Reg データシート (Rev. A) 2013年 12月 12日
ユーザー・ガイド LM34919C Evaluation Board User's Guide 2013年 9月 3日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM34919CQSDEVM — LM34919C-Q1 50 V、600 mA、広い Vin 範囲の、コンスタント・オンタイム降圧スイッチング・レギュレータ評価モジュール

The LM34919CQSDEVM evaluation board provides the design engineer with a fully functional buck regulator, employing the constant on-time (COT) operating principle. This evaluation board provides a 3.3V output over an input range of 4.5V to 50V. The circuit delivers load currents to 600 mA, with (...)

ユーザー ガイド: PDF
評価ボード

LM34919CQTLEVM — LM34919C-Q1 50V、600mA 広範囲 Vin、コンスタント・オンタイム降圧スイッチング・レギュレータ評価基板

The LM34919CQTLEVM evaluation board provides the design engineer with a fully functional buck regulator, employing the constant on-time (COT) operating principle. This evaluation board provides a 3.3V output over an input range of 4.5V to 50V. The circuit delivers load currents to 600 mA, with (...)

ユーザー ガイド: PDF
シミュレーション・モデル

LM34919C-Q1 PSpice Transient Model (Rev. A)

SNVM638A.ZIP (63 KB) - PSpice Model
シミュレーション・モデル

LM34919C-Q1 Unencrypted PSpice Transient Model (Rev. A)

SNVM979A.ZIP (3 KB) - PSpice Model
リファレンス・デザイン

TIDA-00223 — オートモーティブ・オーディオ I2S、同軸使用クラス D アンプ・リファレンス・デザイン

This reference design is an I²S/TDM-based, low-cost, easy-to-use alternative to fiber optics/analog copper wire for connecting an automotive (sound) control panel to an output stage/power amplifier. Supporting I²S as well as TDM, it is capable of transmitting digital audio signal to 16 (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-00098 — AptinaTM オートモティブ・カメラ・モジュール

このリファレンス・デザインは、Aptina 製イメージ・センサとプロセッサ、および TI 製 FPD-Link III シリアライザを使用した、車載用カメラ・モジュール・ソリューションです。このモジュールは Aptina 製の AR0132AT 1.2Mp(メガピクセル)イメージ・センサと AP0101AT 画像信号プロセッサ(ISP)、テキサス・インスツルメンツ製の LM34919C、TPS62231 降圧レギュレータ、DS90UB913A-Q1 FPD-Link III シリアライザを採用しています。これらの組み合わせにより、ボード 2 (...)
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP9300 — オートモーティブ・カメラ・モジュールのイメージ・センサ用電源ソリューション

このリファレンス・デザインは、車載向けカメラ・モジュールの Aptina AR0132 イメージ・センサ用のコンパクト・パワー・ソリューション(基板サイズ:20 x 20mm)を提供します。この設計には、電源ボードとフィルタ・ボードが付属しています。電源ボードには、2 つの同期整流・降圧レギュレータ(LM34919C および TPS62231)が含まれており、1.8V と 2.8V の出力を提供します。RC 出力フィルタは、リップルを軽減し、適切なパワーアップ・シーケンスを確保するためにイメージ・センサで必要となるコア、アナログ、および I/O (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
DSBGA (YZR) 12 オプションの表示
WSON (DNT) 12 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ