ホーム パワー・マネージメント AC/DC & DC/DC controllers (external FET)

AC/DC 疑似共振の電流モード PWM コントローラ

製品詳細

Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback Rating Catalog Duty cycle (max) (%) 100
Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback Rating Catalog Duty cycle (max) (%) 100
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Critical Conduction Mode
  • Peak-Current Mode Control
  • Skip-Cycle Mode for Low-Standby Power
  • Hiccup Mode for Continuous Overload Protection
  • Cycle-by-Cycle Overcurrent Protection Maintains
    Accuracy Over the Universal AC Line
  • Line-Voltage Feedforward
  • OVP Protection by Sensing the Auxiliary Winding
  • Integrated 0.7-A Peak Gate Driver
  • Direct Opto-Coupler Interface
  • Leading Edge Blanking of Current Sense Signal
  • Maximum Frequency Clamp 130 kHz
  • Programmable Soft-Start
  • Thermal Shutdown
  • 8-Pin VSSOP Package
  • Critical Conduction Mode
  • Peak-Current Mode Control
  • Skip-Cycle Mode for Low-Standby Power
  • Hiccup Mode for Continuous Overload Protection
  • Cycle-by-Cycle Overcurrent Protection Maintains
    Accuracy Over the Universal AC Line
  • Line-Voltage Feedforward
  • OVP Protection by Sensing the Auxiliary Winding
  • Integrated 0.7-A Peak Gate Driver
  • Direct Opto-Coupler Interface
  • Leading Edge Blanking of Current Sense Signal
  • Maximum Frequency Clamp 130 kHz
  • Programmable Soft-Start
  • Thermal Shutdown
  • 8-Pin VSSOP Package

The LM5023 is a quasi-resonant pulse width modulated (PWM) controller which contains all of the features needed to implement a highly efficient off-line power supply. The LM5023 uses the transformer auxiliary winding for demagnetization detection to ensure critical conduction mode (CrCM) operation. The LM5023 features a hiccup mode for overcurrent protection with an auto restart to reduce the stress on the power components during an overload. A skip-cycle mode reduces power consumption at light loads for energy conservation applications (ENERGY STAR®, CEPCP, and so forth). The LM5023 also uses the transformer auxiliary winding for output overvoltage protection (OVP); if an OVP fault is detected the LM5023 latches off the controller.

The LM5023 is a quasi-resonant pulse width modulated (PWM) controller which contains all of the features needed to implement a highly efficient off-line power supply. The LM5023 uses the transformer auxiliary winding for demagnetization detection to ensure critical conduction mode (CrCM) operation. The LM5023 features a hiccup mode for overcurrent protection with an auto restart to reduce the stress on the power components during an overload. A skip-cycle mode reduces power consumption at light loads for energy conservation applications (ENERGY STAR®, CEPCP, and so forth). The LM5023 also uses the transformer auxiliary winding for output overvoltage protection (OVP); if an OVP fault is detected the LM5023 latches off the controller.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
10 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM5023 AC-DC Quasi-Resonant Current Mode PWM Controller データシート (Rev. E) PDF | HTML 2016年 1月 6日
ホワイト・ペーパー Power Electronics in Motor Drives: Where is it? (Rev. A) 2019年 10月 1日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
EVM ユーザー ガイド (英語) Using the UCC24630EVM-636 65-W AC-to-DC Adapter (Rev. B) 2016年 12月 12日
その他の技術資料 Design review of a 2-kW parallelable power supply module 2016年 8月 17日
その他の技術資料 Design review of a 2-kW parallelable power supply module (PPT) 2016年 8月 17日
その他の技術資料 Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter 2013年 10月 29日
試験報告書 PMP8655 Test Results 2013年 10月 11日
アプリケーション・ノート LM5023-2EVM Notebook Adapter 2013年 2月 12日
製品概要 LM5023 Product Bulletin 2013年 2月 8日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM5023-2NBEVM — LM5023-2EVM ノートブック・アダプタ

The Texas Instruments LM5023-2NBEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM5023 AC-DC Quasi-Resonant Current Mode PWM Controller. This is a 65W evaluation modules for off-line notebook adapter applications.
評価ボード

UCC24630EVM-636 — UCC24630 65W AC/DC アダプタ

This is a high efficiency 65W AC/DC design using UCC24630 Synchronous Rectification Controller for a Universal input (85Vac to 265Vac) to 19.5V @3.33A output exceeding CoC-5 Tier2 and DOE Level VI performance requirements for external power supplies.

ユーザー ガイド: PDF
評価ボード

UCC28740EVM-525 — UCC28740EVM-525 評価基板

UCC28740EVM-525 評価モジュールは、10W のオフライン不連続導通モード(DCM)フライバック・コンバータで、定電圧(CV)と定電流(CC)の出力レギュレーションを実現します。このモジュールは光カプラ・フィードバックを使用して厳格な電圧レギュレーションを行い、広い負荷ステップに対する過渡応答を改善するほか、1 次側制御を行って高精度の定電流レギュレーションを実現します。UCC28740 コントローラは、自らの制御アルゴリズムで周波数変調、1 次側ピーク電流変調、バレー・スイッチング、バレー・スキップを使用し、動作範囲全体で最大の効率を達成します。

ユーザー ガイド: PDF
シミュレーション・モデル

LM5023 TINA-TI Transient Reference Design

SNVM471.TSC (1447 KB) - TINA-TI Reference Design
シミュレーション・モデル

LM5023 TINA-TI Transient Spice Model

SNVM472.ZIP (23 KB) - TINA-TI Spice Model
シミュレーション・モデル

LM5023 Unencrypted PSpice Transient Model Package (Rev. A)

SNVM463A.ZIP (46 KB) - PSpice Model

多くの TI リファレンス デザインには、LM5023 があります。

TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。

パッケージ ピン数 ダウンロード
VSSOP (DGK) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ