I2C/SMBus インターフェイス搭載、±1℃、温度センサ

製品詳細

Local sensor accuracy (max) 1 Type Local Operating temperature range (°C) -40 to 150 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion, UL recognized Supply current (max) (µA) 550 Temp resolution (max) (Bits) 14 Remote channels (#) 0 Addresses 6 Rating Catalog
Local sensor accuracy (max) 1 Type Local Operating temperature range (°C) -40 to 150 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion, UL recognized Supply current (max) (µA) 550 Temp resolution (max) (Bits) 14 Remote channels (#) 0 Addresses 6 Rating Catalog
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • Single Address Pin Offers Choice of Three
    Selectable Addresses Per Version for a Total of
    Six Possible Addresses.
  • SMBus and I2C-compatible Two-Wire Interface
  • Supports 400-Khz Operation
  • Shutdown Mode With One-shot Feature Available
    for Very Low Average Power Consumption
  • Programmable Digital Temperature Resolution
    From 11 Bits to 14 Bits
  • Fast Conversion Rate Ideal for Quick Power Up
    and Measuring Rapidly Changing Temperature
  • Open-Drain ALERT Output Pin Goes Active When
    Temperature is Above a Programmed
    Temperature Limit
  • Very Stable, Low-noise Digital Output
  • UL Recognized Component
  • Key Specifications
    •  Supply Current
      • Operating
        • 320 µA (Typical)
        • 495 µA (Maximum)
      • Shutdown
        • 8 µA (Maximum)
        • 1.9 µA (Typical)
    • Temperature Accuracy
      • −10°C to 80°C: ±1.0°C (Maximum)
      • −25°C to 115°C: ±1.5°C (Maximum)
      • −40°C to 150°C: ±2°C (Maximum)
    • Resolution
      • 0.25°C to 0.03125°C
    • Conversion Time
      • 11-Bit (0.25°C): 14 ms (Maximum)
      • 14-Bit (0.03125°C): 112 ms (Maximum)
  • Single Address Pin Offers Choice of Three
    Selectable Addresses Per Version for a Total of
    Six Possible Addresses.
  • SMBus and I2C-compatible Two-Wire Interface
  • Supports 400-Khz Operation
  • Shutdown Mode With One-shot Feature Available
    for Very Low Average Power Consumption
  • Programmable Digital Temperature Resolution
    From 11 Bits to 14 Bits
  • Fast Conversion Rate Ideal for Quick Power Up
    and Measuring Rapidly Changing Temperature
  • Open-Drain ALERT Output Pin Goes Active When
    Temperature is Above a Programmed
    Temperature Limit
  • Very Stable, Low-noise Digital Output
  • UL Recognized Component
  • Key Specifications
    •  Supply Current
      • Operating
        • 320 µA (Typical)
        • 495 µA (Maximum)
      • Shutdown
        • 8 µA (Maximum)
        • 1.9 µA (Typical)
    • Temperature Accuracy
      • −10°C to 80°C: ±1.0°C (Maximum)
      • −25°C to 115°C: ±1.5°C (Maximum)
      • −40°C to 150°C: ±2°C (Maximum)
    • Resolution
      • 0.25°C to 0.03125°C
    • Conversion Time
      • 11-Bit (0.25°C): 14 ms (Maximum)
      • 14-Bit (0.03125°C): 112 ms (Maximum)

The LM73 is an integrated, digital-output temperature sensor featuring an incremental Delta-Sigma ADC with a two-wire interface that is compatible with the SMBus and I2C interfaces. The host can query the LM73 at any time to read temperature.

Available in a 6-pin SOT package, the LM73 occupies very little board area while operating over a wide temperature range (–40°C to 150°C) and providing ±1°C accuracy from –10°C to 80°C. The user can optimize between the conversion time and the sensitivity of the LM73 by programming it to report temperature in any of four different resolutions. Defaulting to 11-bit mode (0.25°C/LSB), the LM73 measures temperature in a maximum time of 14 ms, making it ideal for applications that require temperature data very soon after power-up. In its maximum resolution, 14-bit mode (0.03125°C/LSB), the LM73 is optimized to sense very small changes in temperature.

A single multi-level address line selects one of three unique device addresses. An open-drain ALERT output goes active when the temperature exceeds a programmable limit. Both the data and clock lines are filtered for excellent noise tolerance and reliable communication. Additionally, a time-out feature on the clock and data lines causes the LM73 to automatically reset these lines if either is held low for an extended time, thus exiting any bus lock-up condition without processor intervention.

The LM73 is an integrated, digital-output temperature sensor featuring an incremental Delta-Sigma ADC with a two-wire interface that is compatible with the SMBus and I2C interfaces. The host can query the LM73 at any time to read temperature.

Available in a 6-pin SOT package, the LM73 occupies very little board area while operating over a wide temperature range (–40°C to 150°C) and providing ±1°C accuracy from –10°C to 80°C. The user can optimize between the conversion time and the sensitivity of the LM73 by programming it to report temperature in any of four different resolutions. Defaulting to 11-bit mode (0.25°C/LSB), the LM73 measures temperature in a maximum time of 14 ms, making it ideal for applications that require temperature data very soon after power-up. In its maximum resolution, 14-bit mode (0.03125°C/LSB), the LM73 is optimized to sense very small changes in temperature.

A single multi-level address line selects one of three unique device addresses. An open-drain ALERT output goes active when the temperature exceeds a programmable limit. Both the data and clock lines are filtered for excellent noise tolerance and reliable communication. Additionally, a time-out feature on the clock and data lines causes the LM73 to automatically reset these lines if either is held low for an extended time, thus exiting any bus lock-up condition without processor intervention.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TMP102 アクティブ I2C/SMBus 搭載、2.56mm2 パッケージ封止、精度 2℃ のデジタル温度センサ Lower cost, smaller size and lower power alternative
TMP1075 アクティブ 業界標準の LM75 / TMP75 に対する性能アップグレード、1℃ の精度、I²C 対応温度センサ Lower power (4 µA) I²C alternative with support for up to 32 device addresses

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM73 2.7-V, SOT-23, 11- to 14-Bit Digital Temperature Sensor With 2-Wire Interface データシート (Rev. F) PDF | HTML 2015年 10月 29日
証明書 UL Certificate of Compliance Vol1-Sec6 E232195 2018年 8月 9日
アプリケーション・ノート Applying I2C-Compatible Temperature Sensors in Systems With Slow Clock Edges (Rev. A) 2013年 5月 6日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

ドライバまたはライブラリ

LM73SW-LINUX — Linux ドライバ、LM73 用

The Linux driver supports the LM73 Temperature Sensor. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • lm73

 

Linux Source Files

(...)

サポート・ソフトウェア

DIGITALTEMPSENSORSEVM-SW Eval Board Software for Hardware Monitors and Digital Temp Sensors

Evaluation Board Software for Hardware Monitors and Digital Temperature Sensors
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル温度センサ
LM63 ファン制御機能搭載、1 個のリモート / ローカル温度センサ LM64 ファン制御機能と 5 個の GPIO 搭載、1 個のリモート / ローカル温度センサ LM71 SPI インターフェイス搭載、±1.5℃、温度センサ LM71-Q1 車載グレード、SPI インターフェイス搭載、±1.5℃、温度センサ LM73 I2C/SMBus インターフェイス搭載、±1℃、温度センサ LM86 SMBus インターフェイス搭載、±0.75℃、リモート / ローカル温度センサ LM89 SMBus インターフェイス搭載、バス共有向けの 2 個のアドレス使用、±0.75℃、リモート / ローカル温度センサ LM90 SMBus インターフェイス搭載、リモート / ローカル温度センサ LM93 ハードウェア・モニタと 16 個の電源電圧モニタ搭載、2 個のリモートと 1 個のローカル温度センサ LM95010 SensorPath インターフェイス搭載、±2℃、温度センサ LM95071 SPI インターフェイス搭載、±1℃、温度センサ LM95221 ベータ補償機能と SMBus/I2C インターフェイス搭載、±3℃、デュアル、リモート / ローカル温度センサ LM95231 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ LM95235 SMBus とベータ補償機能搭載、65/90nm ダイオード向け、±0.75℃、リモート / ローカル温度センサ LM95235-Q1 車載グレード、TruTherm テクノロジー採用、SMBus 搭載、±2℃、リモート / ローカル温度センサ LM96000 ファン制御機能と 6 個の電源電圧モニタ搭載、ハードウェア・モニタ LM96080 ファン速度モニタと電源電圧モニタ搭載、1 個のローカル温度センサ LM96163 ベータ補償機能とファンの速度制御機能搭載、1 個のリモート / ローカル温度センサ LM99 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ
サポート・ソフトウェア

SENSOREVAL Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル温度センサ
LM63 ファン制御機能搭載、1 個のリモート / ローカル温度センサ LM64 ファン制御機能と 5 個の GPIO 搭載、1 個のリモート / ローカル温度センサ LM71 SPI インターフェイス搭載、±1.5℃、温度センサ LM71-Q1 車載グレード、SPI インターフェイス搭載、±1.5℃、温度センサ LM73 I2C/SMBus インターフェイス搭載、±1℃、温度センサ LM75A I2C/SMBus インターフェイス搭載、精度 2℃、業界標準の温度センサ LM86 SMBus インターフェイス搭載、±0.75℃、リモート / ローカル温度センサ LM89 SMBus インターフェイス搭載、バス共有向けの 2 個のアドレス使用、±0.75℃、リモート / ローカル温度センサ LM90 SMBus インターフェイス搭載、リモート / ローカル温度センサ LM93 ハードウェア・モニタと 16 個の電源電圧モニタ搭載、2 個のリモートと 1 個のローカル温度センサ LM95010 SensorPath インターフェイス搭載、±2℃、温度センサ LM95071 SPI インターフェイス搭載、±1℃、温度センサ LM95172-Q1 車載グレード、200℃ に対応、SPI インターフェイス搭載、±1℃、温度センサ LM95214 SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ LM95221 ベータ補償機能と SMBus/I2C インターフェイス搭載、±3℃、デュアル、リモート / ローカル温度センサ LM95231 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ LM95233 TruTherm テクノロジー採用、SMBus インターフェイス搭載、±2℃、デュアル、リモート / ローカル温度センサ LM95234 TruTherm テクノロジー採用、SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ LM95235 SMBus とベータ補償機能搭載、65/90nm ダイオード向け、±0.75℃、リモート / ローカル温度センサ LM95235-Q1 車載グレード、TruTherm テクノロジー採用、SMBus 搭載、±2℃、リモート / ローカル温度センサ LM95241 ベータ補償機能と SMBus/I2C インターフェイス搭載、±1.25℃、デュアル、リモート /ローカル温度センサ LM95245 SMBus とベータ補償機能搭載、45nm ダイオード向け、±0.75℃、リモート / ローカル温度センサ LM96000 ファン制御機能と 6 個の電源電圧モニタ搭載、ハードウェア・モニタ LM96080 ファン速度モニタと電源電圧モニタ搭載、1 個のローカル温度センサ LM96163 ベータ補償機能とファンの速度制御機能搭載、1 個のリモート / ローカル温度センサ LM99 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ
高精度 ADC
ADC128D818 温度センサと I2C インターフェイス搭載、内部と外部の電圧リファレンスに対応、12 ビット、82SPS、8 チャネル・デルタ・シグマ ADC
シミュレーション・モデル

LM73 IBIS Model

SNOM464.ZIP (41 KB) - IBIS Model
パッケージ ピン数 ダウンロード
SOT-23-THN (DDC) 6 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ