LM95234

アクティブ

TruTherm テクノロジー採用、SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ

製品詳細

Local sensor accuracy (max) 2 Type Remote Operating temperature range (°C) -40 to 140 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion Supply current (max) (µA) 800 Temp resolution (max) (Bits) 11 Remote channels (#) 4 Addresses 3 Rating Catalog
Local sensor accuracy (max) 2 Type Remote Operating temperature range (°C) -40 to 140 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion Supply current (max) (µA) 800 Temp resolution (max) (Bits) 11 Remote channels (#) 4 Addresses 3 Rating Catalog
WSON (NHL) 14 16 mm² 4 x 4
  • Accurately Senses Die Temperature of 4 Remote ICs or Diode Junctions and Local Temperature
  • TruTherm BJT Beta Compensation Technology Accurately Senses Sub-micron Process Thermal Diodes
  • Programmable Digital Filters and Analog Front End Filter
  • 0.125°C LSb Temperature Resolution
  • 0.03125°C LSb Remote Temperature Resolution with Digital Filter Enabled
  • +127.875°C/–128°C and 0°C/255°C Remote Ranges
  • Remote Diode Fault Detection, Model Selection and Offset Correction
  • Mask and Status Register Support
  • 3 Programmable TCRIT Outputs with Programmable Shared Hysteresis and Fault-Queue
  • Programmable Conversion Rate and Shutdown Mode One-shot Conversion Control
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • Three-level Address Pin
  • 14-pin WSON Package

Key Specifications

  • Local Temperature Accuracy ±2.0°C (max)
  • Remote Diode Temperature Accuracy ±0.875°C (max)
  • Supply Voltage 3.0V to 3.6V
  • Average Supply Current (1Hz conversion rate)

TruTherm is a trademark of Texas Instruments. All trademarks are the property of their respective owners.

  • Accurately Senses Die Temperature of 4 Remote ICs or Diode Junctions and Local Temperature
  • TruTherm BJT Beta Compensation Technology Accurately Senses Sub-micron Process Thermal Diodes
  • Programmable Digital Filters and Analog Front End Filter
  • 0.125°C LSb Temperature Resolution
  • 0.03125°C LSb Remote Temperature Resolution with Digital Filter Enabled
  • +127.875°C/–128°C and 0°C/255°C Remote Ranges
  • Remote Diode Fault Detection, Model Selection and Offset Correction
  • Mask and Status Register Support
  • 3 Programmable TCRIT Outputs with Programmable Shared Hysteresis and Fault-Queue
  • Programmable Conversion Rate and Shutdown Mode One-shot Conversion Control
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • Three-level Address Pin
  • 14-pin WSON Package

Key Specifications

  • Local Temperature Accuracy ±2.0°C (max)
  • Remote Diode Temperature Accuracy ±0.875°C (max)
  • Supply Voltage 3.0V to 3.6V
  • Average Supply Current (1Hz conversion rate)

TruTherm is a trademark of Texas Instruments. All trademarks are the property of their respective owners.

LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface that can very accurately monitor the temperature of four remote diodes as well as its own temperature that includes patent pending remote diode TruTherm BJT beta compensation beta compensation technology. The four remote diodes can be external devices such as microprocessors, graphics processors or diode-connected 2N3904s. The LM95234's TruTherm BJT beta compensation technology allows sensing of 90 nm or 65 nm process thermal diodes accurately.

The LM95234 reports temperature in two different formats for +127.875°C/–128°C range and 0°C/255°C range. The LM95234 TCRIT1, TCRIT2 and TCRIT3 outputs are triggered when any unmasked channel exceeds its corresponding programmable limit and can be used to shutdown the system, to turn on the system fans or as a microcontroller interrupt function. The current status of the TCRIT1, TCRIT2 and TCRIT3 pins can be read back from the status registers. Mask registers are available for further control of the TCRIT outputs.

Two LM95234 remote temperature channels have programmable digital filters while the other two remote channels utilize a fault-queue to minimize unwanted TCRIT events when temperature spikes are encountered.

For optimum flexibility and accuracy, each LM95234 channel includes registers for sub-micron process or 2N3904 diode model selection as well as offset correction. A three-level address pin allows connection of up to 3 LM95234s to the same SMBus master. The LM95234 includes power saving functions such as: programmable conversion rate, shutdown mode, and disabling of unused channels.

LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface that can very accurately monitor the temperature of four remote diodes as well as its own temperature that includes patent pending remote diode TruTherm BJT beta compensation beta compensation technology. The four remote diodes can be external devices such as microprocessors, graphics processors or diode-connected 2N3904s. The LM95234's TruTherm BJT beta compensation technology allows sensing of 90 nm or 65 nm process thermal diodes accurately.

The LM95234 reports temperature in two different formats for +127.875°C/–128°C range and 0°C/255°C range. The LM95234 TCRIT1, TCRIT2 and TCRIT3 outputs are triggered when any unmasked channel exceeds its corresponding programmable limit and can be used to shutdown the system, to turn on the system fans or as a microcontroller interrupt function. The current status of the TCRIT1, TCRIT2 and TCRIT3 pins can be read back from the status registers. Mask registers are available for further control of the TCRIT outputs.

Two LM95234 remote temperature channels have programmable digital filters while the other two remote channels utilize a fault-queue to minimize unwanted TCRIT events when temperature spikes are encountered.

For optimum flexibility and accuracy, each LM95234 channel includes registers for sub-micron process or 2N3904 diode model selection as well as offset correction. A three-level address pin allows connection of up to 3 LM95234s to the same SMBus master. The LM95234 includes power saving functions such as: programmable conversion rate, shutdown mode, and disabling of unused channels.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
LM95214 アクティブ SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ Pin-to-pin replacement, requires a 3.3-V power rail
比較対象デバイスと類似の機能
TMP464 アクティブ 高精度 5 チャネル(リモート 4、ローカル 1)リモート / ローカル温度センサ Smaller package, lower power and operation down to 1.7 V

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM95234 Quad Remote Diode & Local Temp Sensor w/SMBus Interface &TruTherm Tech データシート (Rev. D) 2013年 3月 22日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

ドライバまたはライブラリ

LM95234SW-LINUX — Linux ドライバ、LM95234 用

この Linux ドライバは、リモートとローカルの温度センサである LM95234 シリーズをサポートしています。また、この Linux ドライバは I2C バス経由の通信をサポートしており、ハードウェア監視サブシステムとのインターフェイスとして機能します。
Linux のメインライン・ステータス

Linux メインラインで利用可能か:はい
git.ti.com から入手可能か:N/A

サポート対象デバイス:
  • LM95233
  • LM95234
Linux ソース・ファイル

このデバイスに関連付けられているファイル:

  1. drivers/hwmon/lm95234.c
  2. (...)
サポート・ソフトウェア

SENSOREVAL Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
デジタル温度センサ
LM63 ファン制御機能搭載、1 個のリモート / ローカル温度センサ LM64 ファン制御機能と 5 個の GPIO 搭載、1 個のリモート / ローカル温度センサ LM71 SPI インターフェイス搭載、±1.5℃、温度センサ LM71-Q1 車載グレード、SPI インターフェイス搭載、±1.5℃、温度センサ LM73 I2C/SMBus インターフェイス搭載、±1℃、温度センサ LM75A I2C/SMBus インターフェイス搭載、精度 2℃、業界標準の温度センサ LM86 SMBus インターフェイス搭載、±0.75℃、リモート / ローカル温度センサ LM89 SMBus インターフェイス搭載、バス共有向けの 2 個のアドレス使用、±0.75℃、リモート / ローカル温度センサ LM90 SMBus インターフェイス搭載、リモート / ローカル温度センサ LM93 ハードウェア・モニタと 16 個の電源電圧モニタ搭載、2 個のリモートと 1 個のローカル温度センサ LM95010 SensorPath インターフェイス搭載、±2℃、温度センサ LM95071 SPI インターフェイス搭載、±1℃、温度センサ LM95172-Q1 車載グレード、200℃ に対応、SPI インターフェイス搭載、±1℃、温度センサ LM95214 SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ LM95221 ベータ補償機能と SMBus/I2C インターフェイス搭載、±3℃、デュアル、リモート / ローカル温度センサ LM95231 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ LM95233 TruTherm テクノロジー採用、SMBus インターフェイス搭載、±2℃、デュアル、リモート / ローカル温度センサ LM95234 TruTherm テクノロジー採用、SMBus インターフェイス搭載、±2℃、クワッド、リモート / ローカル温度センサ LM95235 SMBus とベータ補償機能搭載、65/90nm ダイオード向け、±0.75℃、リモート / ローカル温度センサ LM95235-Q1 車載グレード、TruTherm テクノロジー採用、SMBus 搭載、±2℃、リモート / ローカル温度センサ LM95241 ベータ補償機能と SMBus/I2C インターフェイス搭載、±1.25℃、デュアル、リモート /ローカル温度センサ LM95245 SMBus とベータ補償機能搭載、45nm ダイオード向け、±0.75℃、リモート / ローカル温度センサ LM96000 ファン制御機能と 6 個の電源電圧モニタ搭載、ハードウェア・モニタ LM96080 ファン速度モニタと電源電圧モニタ搭載、1 個のローカル温度センサ LM96163 ベータ補償機能とファンの速度制御機能搭載、1 個のリモート / ローカル温度センサ LM99 TruTherm テクノロジー採用、SMBus インターフェイス搭載、デュアル、リモート / ローカル温度センサ
高精度 ADC
ADC128D818 温度センサと I2C インターフェイス搭載、内部と外部の電圧リファレンスに対応、12 ビット、82SPS、8 チャネル・デルタ・シグマ ADC
パッケージ ピン数 ダウンロード
WSON (NHL) 14 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ