LMC6492 Dual CMOS Rail-to-Rail Input and Output Operational Amplifier | TIJ.co.jp

この製品はすでに市場にリリースされており、ご購入できます。 一部の製品は、より新しい代替品を使用できる可能性があります。
Dual CMOS Rail-to-Rail Input and Output Operational Amplifier



  • TLV9102  - このデバイスは、機能とパラメータの点で、比較対象のデバイスと完全に同等です。 


The LMC6492/LMC6494 amplifiers were specifically developed for single supply applications that operate from -40°C to +125°C. This feature is well-suited for automotive systems because of the wide temperature range. A unique design topology enables the LMC6492/LMC6494 common-mode voltage range to accommodate input signals beyond the rails. This eliminates non-linear output errors due to input signals exceeding a traditionally limited common-mode voltage range. The LMC6492/LMC6494 signal range has a high CMRR of 82 dB for excellent accuracy in non-inverting circuit configurations.

The LMC6492/LMC6494 rail-to-rail input is complemented by rail-to-rail output swing. This assures maximum dynamic signal range which is particularly important in 5V systems.

Ultra-low input current of 150 fA and 120 dB open loop gain provide high accuracy and direct interfacing with high impedance sources.


(Typical unless otherwise noted)

  • Rail-to-Rail input common-mode voltage range, guaranteed over temperature
  • Rail-to-Rail output swing within 20 mV of supply rail, 100 k load
  • Operates from 5V to 15V supply
  • Excellent CMRR and PSRR 82 dB
  • Ultra low input current 150 fA
  • High voltage gain (RL = 100 k) 120 dB
  • Low supply current (@ VS = 5V) 500 µA/Amplifier
  • Low offset voltage drift 1.0 µV/°C