超低ノイズ、広帯域、擬似差動出力トランスインピーダンス・アンプ
製品の詳細
パラメータ
パッケージ|ピン|サイズ
特長
- Internal Midscale Reference Voltage
- Pseudo-Differential Output Voltage
- Wide Dynamic Range
- Closed-Loop Transimpedance Bandwidth:
- 125 MHz (5-kΩ Transimpedance Gain,
1.5-pF External Parasitic Capacitance) - 105 MHz (20-kΩ Transimpedance Gain,
1.5-pF External Parasitic Capacitance)
- 125 MHz (5-kΩ Transimpedance Gain,
- Ultralow Input-Referred Current Noise
(Brickwall Filter BW = 135 MHz):
15 nARMS (20-kΩ Transimpedance) - Very Fast Overload Recovery Time: < 25 ns
- Internal Input Protection Diode
- Power Supply:
- Voltage: 2.7 V to 3.6 V
- Current: 23.4 mA
- Extended Temperature Range: –40°C to +85°C
概要
The OPA857 is a wideband, fast overdrive recovery, fast-settling, ultralow-noise transimpedance amplifier targeted at photodiode monitoring applications. With selectable feedback resistance, the OPA857 simplifies the design of high-performance optical systems. Very fast overload recovery time and internal input protection provide the best combination to protect the remainder of the signal chain from overdrive while minimizing recovery time. The two selectable transimpedance gain configurations allow high dynamic range and flexibility required in modern transimpedance amplifier applications. The OPA857 is available in a 3-mm × 3-mm VQFN package.
The device is characterized for operation over the full industrial temperature range from –40°C to +85°C.
機能およびピン配置は同じだが、同等ではない比較製品
技術資料
種類 | タイトル | 英語版のダウンロード | 日付 | |
---|---|---|---|---|
* | データシート | OPA857 Ultralow-Noise, Wideband, Selectable-Feedback Resistance Transimpedance Amplifier データシート (Rev. D) | 2016年 8月 17日 | |
ホワイト・ペーパー | An Introduction to Automotive LIDAR (Rev. A) | 2020年 5月 21日 | ||
アプリケーション・ノート | Time of Flight & LIDAR - Optical Front End Design | 2020年 2月 4日 | ||
e-Book(PDF) | The Signal - オペアンプ設計ブログ集 | 英語版をダウンロード | 2018年 3月 23日 | |
ユーザー・ガイド | OPA857EVM Evaluation Module (Rev. A) | 2017年 2月 9日 | ||
ユーザー・ガイド | Extending Bandwith of the OPA857 Design Guide | 2016年 7月 25日 | ||
技術記事 | What you need to know about transimpedance amplifiers – part 1 | 2016年 5月 6日 | ||
ユーザー・ガイド | TIDU | 2015年 10月 26日 | ||
技術記事 | How to evaluate a transimpedance amplifier (part 2) | 2014年 3月 12日 | ||
技術記事 | How to evaluate a transimpedance amplifier (part 1) | 2014年 1月 29日 | ||
技術記事 | Let there be light: Converting light into voltage | 2014年 1月 24日 | ||
アプリケーション・ノート | 高速データ変換 | 英語版をダウンロード | 2009年 12月 11日 | |
アプリケーション・ノート | 高速オペアンプのノイズ解析 (Rev. A 翻訳版) | 英語版をダウンロード (Rev.A) | 2007年 12月 5日 |
設計と開発
追加の事項や他のリソースを参照するには、以下のタイトルをクリックすると、詳細ページを表示できます。ハードウェア開発
概要
The OPA857EVM is an evaluation module for the OPA857 amplifier in a QFN-16 (RGT) package. This evaluation module is designed to quickly and easily demonstrate the functionality and versatility of the amplifier. The EVM is ready to connect to power, signal source, and test instruments through (...)
特長
- The EVM is configured for single-supply operation to a pseudo-differential output.
- The transimpedance gain can be easily configured for either the 5-kΩ or the 20-kΩ gain option.
- The EVM is designed for easy connection to standard 50-Ω input and output impedance test equipment.
- The inputs and outputs (...)
概要
特長
- Extending the bandwidth of the OPA857 from 100MHz to greater than 250MHz
- Adjusting the gain of the OPA857 between 1-20kΩ
- Evaluation module allows flexibility in testing the OPA857 in internal test mode or with an external photodiode
設計ツールとシミュレーション
設計とシミュレーション向けの環境である PSpice for TI を使用すると、内蔵のライブラリを活用して、複雑なミックスド・シグナル設計のシミュレーションを実施することができます。完成度の高い最終機器を設計し、レイアウトの確定や製造開始より前に、ソリューションのプロトタイプを製作することができます。この結果、市場投入期間の短縮と開発コストの削減を実現できます。
設計とシミュレーション向けのツールである PSpice for TI の環境内で、各種 TI デバイスの検索、製品ラインアップの参照、テスト・ベンチの起動、設計のシミュレーションを実施し、選定したデバイスをさらに分析することができます。また、複数の TI デバイスを組み合わせてシミュレーションを実行することもできます。
事前ロード済みの複数のモデルで構成されたライブラリ全体に加えて、PSpice for TI ツール内で各種 TI デバイスの最新の技術関連資料に簡単にアクセスすることもできます。開発中のアプリケーションに適したデバイスを選定できたことを確認した後、TI 製品の購入ページにアクセスして、その製品を購入することができます。
PSpice for TI を使用すると、回路の検討から設計の開発や検証まで、作業の進展に合わせて設計サイクルの各段階で、シミュレーションのニーズに適した各種ツールにアクセスできます。コスト不要で入手でき、開発を容易に開始できます。設計とシミュレーションに適した PSpice スイートをダウンロードして、今すぐ設計を開始してください。
開発の開始
- PSpice for TI シミュレータへのアクセスの申請
- ダウンロードとインストール
- シミュレーション方法説明ビデオのご視聴
特長
- Cadence の PSpice テクノロジーを活用
- デジタル・モデル・スイートが付属する事前インストール済みのライブラリを活用して、ワーストケース・タイミング分析を実現可能
- 動的更新により、最新のデバイス・モデルに確実にアクセス可能
- 精度の低下を招かずに、シミュレーション速度を重視して最適化済み
- 複数製品の同時分析をサポート
- OrCAD Capture フレームワークを土台とし、業界で最も幅広く使用されている回路図のキャプチャとシミュレーションの環境へのアクセスを実現
- オフライン作業が可能
- 以下の点を含め、多様な動作条件とデバイス公差にまたがって設計を検証
- 自動的な測定と後処理
- モンテカルロ分析法
- ワーストケース分析
- 熱解析
リファレンス・デザイン
設計ファイル
-
download TIDA-00663 BOM.pdf (73KB) -
download TIDA-00663 Assembly Drawing.pdf (306KB) -
download TIDA-00663 PCB.pdf (1572KB) -
download TIDA-00663 CAD Files.zip (687KB) -
download TIDA-00663 Gerber.zip (440KB)
設計ファイル
-
download TIDA-01187 BOM.pdf (54KB) -
download TIDA-01187 Assembly Drawing.pdf (48KB) -
download TIDA-01187 PCB.pdf (212KB) -
download TIDA-01187 CAD Files.zip (303KB) -
download TIDA-01187 Gerber.zip (105KB)
設計ファイル
-
download TIDA-00725 BOM (Laser Driver).pdf (117KB) -
download TIDA-00725 BOM (Signal Chain).pdf (123KB) -
download TIDA-00725 Assembly Drawing (Laser Driver).pdf (226KB) -
download TIDA-00725 Assembly Drawing (TIA OPA857 THS4541).pdf (134KB) -
download TIDA-00725 Fabrication Drawing (Laser Driver).pdf (289KB) -
download TIDA-00725 Fabrication Drawing (TIA OPA857 THS4541).pdf (288KB) -
download TIDA-00725 Gerber (Laser Driver) (Rev. A).zip (3511KB) -
download TIDA-00725 Gerber (TIA OPA857 THS4541) (Rev. A).zip (3446KB) -
download TIDA-00725 Altium (Laser Driver) (Rev. A).zip (5407KB) -
download TIDA-00725 Altium (TIA OPA857 THS4541) (Rev. A).zip (5006KB)
設計ファイル
-
download TIDA-00978 BOM.pdf (62KB) -
download TIDA-00978 Assembly Drawing .pdf (178KB) -
download TIDA-00978 PCB.pdf (781KB) -
download TIDA-00978 Gerber .zip (243KB) -
download TIDA-00978 CAD Files.zip (4080KB)
CAD/CAE シンボル
パッケージ | ピン数 | ダウンロード |
---|---|---|
VQFN (RGT) | 16 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL rating/ リフローピーク温度
- MTBF/FIT の推定値
- 原材料組成
- 認定試験結果
- 継続的な信頼性モニタ試験結果
おすすめの製品には、この TI 製品に関連するパラメータ、評価モジュール、またはリファレンス・デザインが含まれている場合があります。