Configuration8:1Number of channels (#)1Power supply voltage - single (V)2.5, 3.3Ron (Typ) (Ohms)5ON-state leakage current (Max) (µA)1Bandwidth (MHz)200Operating temperature range (C)-40 to 85FeaturesPowered-off protectionInput/output continuous current (Max) (mA)128RatingCatalogopen-in-newその他の アナログ・スイッチ/マルチプレクサ
The SN74CBTLV3251 device is a 1-of-8 high-speed FET multiplexer/demultiplexer. The low on-state resistance of the
switch allows connections to be made with minimal propagation delay.
The select inputs (S0, S1, S2) control the data flow. The FET multiplexers/demultiplexers are disabled when the
output-enable (OE\) input is high.
This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that
damaging current will not backflow through the device when it is powered down. The device has isolation during
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages. The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.
Quick testing of TI's surface mount packages
Allows suface mount packages to be plugged into 100mil spaced bread board
Supports TI's 16 most popular leadless packages with a single panel