TLK111
産業用温度範囲、10/100Mbps イーサネット物理層トランシーバ
TLK111
- Fully Pin Compatible with the TLK110 Device
- Low Power Consumption:
- Single Supply: <205mW PHY, 275mW with
Center Tap (Typical) - Dual Supplies: <126mW PHY, 200mW with
Center Tap (Typical)
- Single Supply: <205mW PHY, 275mW with
- Programmable Power Back Off to reduce PHY
power up to 20% in systems with shorter cables - IEEE 1588 SFD indication enables time stamping
by a controller or processor - Low deterministic latency supports IEEE1588
implementation - Cable Diagnostics
- Programmable Fast Link Down Modes, <10µs
reaction time - Variable I/O voltage range: 1.8V to 3.3V
- 3.3-V MAC Interface
- Fixed TX Clock to XI, with programmable phase
shift - Auto-MDIX for 10/100Mbs
- Energy Detection Mode
- 25 MHz Clock Out
- MII and RMII Capabilities
- IEEE 802.3u MII
- IEEE 802.3u Auto-Negotiation and Parallel
Detection - Error-Free 100Base-T Operation up to 150 Meters
Under Typical Conditions - Error-Free 10Base-T Operation up to 300 Meters
Under Typical Conditions - Serial Management Interface
- IEEE 802.3u ENDEC, 10Base-T
Transceivers and Filters - IEEE 802.3u PCS, 100Base-TX Transceivers
- IEEE 1149.1 JTAG
- Integrated ANSI X3.263 Compliant TP-PMD
Physical Sublayer with Adaptive Equalization and
Baseline Wander Compensation - Programmable LED Support Link, 10/100Mbs
Mode, Activity, and Collision Detect - 10/100Mbs Packet BIST (Built in Self Test)
- HBM ESD protection on RD± and TD± of 16kV
- 48-pin LQFP Package (7mm) × (7mm)
The TLK111 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. The TLK111 supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct connection to a Media Access Controller (MAC).
The TLK111 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation.
The TLK111 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
The TLK111 Ethernet PHY has a special Power Back Off mode to conserve power in systems with relatively short cables. This mode provides the flexibility to reduce system power when the system is not required to drive the standard IEEE 802.3 100m cable length, or the extended 150m, error-free cable reach of the TLK111. For more detail, see application note SLLA328.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TLK111 PHYTER Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver データシート (Rev. C) | PDF | HTML | 2014年 11月 10日 | ||
アプリケーション・ノート | Selection and specification of crystals for Texas Instruments ethernet physical | 2019年 2月 6日 | ||||
EVM ユーザー ガイド (英語) | TLK111EVM User's Guide | 2014年 7月 4日 | ||||
ユーザー・ガイド | TLK1xx Software GUI | 2013年 8月 15日 | ||||
EVM ユーザー ガイド (英語) | TLK111 Customer EVM | 2013年 8月 13日 | ||||
アプリケーション・ノート | TLK1XX Design & Layout Guide (Rev. A) | 2012年 8月 15日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
ETHERNET-SW — イーサネット PHY の Linux ドライバとツール
USB-2-MDIO ソフトウェアを使用すると、デバッグ時やプロトタイプ製作時にレジスタに直接アクセスできます。 このツールは、TI のすべてのイーサネット PHY をサポートしています。 ドライバ サポートの有効化 "make menuconfig" を使用してカーネルを構成します (代わりに、"make (...)
USB-2-MDIO — USB-2-MDIO Tool v1.0
The USB-2-MDIO software tool lets Texas Instruments' Ethernet PHYs access the MDIO status and device control registers. The USB-2-MDIO tool includes a LaunchPad™ Development kit for TI's MSP430™ MCUs that is interfaced with a lightweight GUI. The (...)
サポート対象の製品とハードウェア
製品
イーサネット PHY
ハードウェア開発
評価ボード
開発キット
ソフトウェア
ドライバまたはライブラリ
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム
TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)
TINA は DesignSoft (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
LQFP (PT) | 48 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点