ホーム パワー・マネージメント USB パワー・スイッチと充電ポート・コントローラ

TPS2511

アクティブ

USB 専用充電ポート・コントローラと 2.2A パワー・スイッチ

製品詳細

Product type Charge port controller Vin (min) (V) 4.5 Vin (max) (V) 5.5 Continuous current (max) (A) 2.7 Current limit (A) 0.25 to 2.7 Operating temperature range (°C) -40 to 125 Enable Active High Number of switches 1 Current limit accuracy at 1 A 0.1 Rating Catalog
Product type Charge port controller Vin (min) (V) 4.5 Vin (max) (V) 5.5 Continuous current (max) (A) 2.7 Current limit (A) 0.25 to 2.7 Operating temperature range (°C) -40 to 125 Enable Active High Number of switches 1 Current limit accuracy at 1 A 0.1 Rating Catalog
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9
  • Supports a USB DCP Shorting D+ Line to D– Line
  • Supports a USB DCP Applying 2 V on D+ Line and 2.7 V on D– Line (or a USB DCP Applying
    2.7 V on D+ Line and 2 V on D– Line)
  • Supports a USB DCP Applying 1.2 V on D+ and D– Lines
  • Automatically Switch D+ and D– Lines Connections for an Attached Device
  • Hiccup Mode for Output Short-Circuit Protection
  • Provides CS Pin for USB Cable Compensation
  • Programmable Current Limit (ILIM_SET Pin)
  • Accurate ±10% Current Limit at 2.3 A (Typical)
  • 70-mΩ (Typical) High-Side MOSFET
  • Compatible With USB 2.0 and 3.0 Power Switch Requirements
  • Operating Range: 4.5 V to 5.5 V
  • Available in 8-Pin MSOP-PowerPAD™ Package
  • Supports a USB DCP Shorting D+ Line to D– Line
  • Supports a USB DCP Applying 2 V on D+ Line and 2.7 V on D– Line (or a USB DCP Applying
    2.7 V on D+ Line and 2 V on D– Line)
  • Supports a USB DCP Applying 1.2 V on D+ and D– Lines
  • Automatically Switch D+ and D– Lines Connections for an Attached Device
  • Hiccup Mode for Output Short-Circuit Protection
  • Provides CS Pin for USB Cable Compensation
  • Programmable Current Limit (ILIM_SET Pin)
  • Accurate ±10% Current Limit at 2.3 A (Typical)
  • 70-mΩ (Typical) High-Side MOSFET
  • Compatible With USB 2.0 and 3.0 Power Switch Requirements
  • Operating Range: 4.5 V to 5.5 V
  • Available in 8-Pin MSOP-PowerPAD™ Package

The TPS2511 device is a USB-dedicated charging port (DCP) controller and current-limiting power switch. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:

    1. Divider DCP, required to apply 2.7 V and 2 V on the D+ and D– lines respectively or 2 V and 2.7 V on the D+ and D– lines respectively
    2. BC1.2 DCP, required to short the D+ line to the D– line1.2 V on both D+ and D– lines

    The TPS2511 is a 70-mΩ power-distribution switch intended for applications where heavy capacitive loads and short circuits are likely to be encountered. This device also provides hiccup mode when the output (OUT) voltage is less than 3.8 V (typical) or when an overtemperature protection occurs during an overload condition. Accurate and programmable current limit provides flexibility and convenience for applications. The TPS2511 provides a CS pin for USB cable resistance compensation and an EN pin to control the device turnon and turnoff.

    The TPS2511 device is a USB-dedicated charging port (DCP) controller and current-limiting power switch. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:

      1. Divider DCP, required to apply 2.7 V and 2 V on the D+ and D– lines respectively or 2 V and 2.7 V on the D+ and D– lines respectively
      2. BC1.2 DCP, required to short the D+ line to the D– line1.2 V on both D+ and D– lines

      The TPS2511 is a 70-mΩ power-distribution switch intended for applications where heavy capacitive loads and short circuits are likely to be encountered. This device also provides hiccup mode when the output (OUT) voltage is less than 3.8 V (typical) or when an overtemperature protection occurs during an overload condition. Accurate and programmable current limit provides flexibility and convenience for applications. The TPS2511 provides a CS pin for USB cable resistance compensation and an EN pin to control the device turnon and turnoff.

      ダウンロード 字幕付きのビデオを表示 ビデオ

      お客様が関心を持ちそうな類似品

      open-in-new 代替品と比較
      比較対象デバイスと同等の機能で、ピン配置が異なる製品
      TPS2546 アクティブ CDP/SDP オート・スイッチと 2.5A パワー・スイッチと負荷検出機能搭載、USB 充電ポート・コントローラ Contains D+/D- switches for systems requiring support for USB data in addition to BC1.2 charging.

      技術資料

      star =TI が選定したこの製品の主要ドキュメント
      結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
      10 をすべて表示
      種類 タイトル 最新の英語版をダウンロード 日付
      * データシート TPS2511 USB Dedicated Charging Port Controller and Current Limiting Power Switch データシート (Rev. A) PDF | HTML 2015年 8月 5日
      セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
      セレクション・ガイド USB Type-A Power Switch and Charging Controller Selector Guide (Rev. F) 2018年 5月 24日
      アプリケーション・ノート Effective System ESD Protection Guidelines:TPS251x USB Charging Port Controllers 2016年 7月 19日
      技術記事 Power Tips: Don’t let a drooping USB voltage slow down your charger PDF | HTML 2015年 10月 30日
      アプリケーション・ノート Creating a Universal Car Charger for USB Devices From the TPS54240 and TPS2511 (Rev. E) 2013年 9月 16日
      試験報告書 Test Report for the iPad Automotive Charger 2013年 6月 11日
      アプリケーション・ノート Optimizing Li-ion Power Pack Performance 2012年 10月 4日
      アプリケーション・ノート Creating a Dual USB Universal Car Charger From the TPS40170 and Two TPS2511 2012年 5月 22日
      EVM ユーザー ガイド (英語) Using the TPS2511EVM 2012年 5月 4日

      設計と開発

      その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

      評価ボード

      TPS2511EVM-141 — TPS2511 評価モジュール

      The Texas Instruments TPS2511EVM-141 evaluation module (EVM) helps designers evaluate the performance of the TPS2511 USB Dedicated Charging Port Controller and Power Switch. The EVM charges devices without passing data to the host, so is not used as a data port.
      ユーザー ガイド: PDF
      シミュレーション・モデル

      TPS2511 PSpice Transient Model

      SLUM309.ZIP (41 KB) - PSpice Model
      リファレンス・デザイン

      TIDA-01253 — CISPR 25 Class 4 車載デュアル・リモート / ローカル USB ポートのリファレンス・デザイン

      This automotive media port design allows customers to accelerate media port systems by taking advantage of a complete reference design comprising analog AEC-100-qualified integrated circuits (ICs). The reference design is specified for automotive media ports that require both local-port and (...)
      設計ガイド: PDF
      回路図: PDF
      リファレンス・デザイン

      PMP8851 — オートモーティブ USB チャージャ、5V@2A を生成

      この USB バッテリ充電リファレンス・デザインは、自動車の電源アクセサリ・ポートに収まるようにサイズが最適化されています。この設計では、内蔵電流制限パワー・スイッチと 42V DC/DC コンバータが搭載された USB 専用充電ポート・コントローラが使用されています。高集積および小さなパッケージ・サイズにより、フォーム・ファクタを縮小できます。
      試験報告書: PDF
      回路図: PDF
      リファレンス・デザイン

      PMP9594 — 85~265VAC 入力、5V/1.5A AC/DC USB チャージャ、PSR フライバックに基づく自動検出付、BJT スイッチ付

      このリファレンス・デザインは、85 ~ 265VAC のユニバーサル入力から、78% を上回る効率で、絶縁型の 5V/1.5A 出力を供給します。UCC28722 1 次側レギュレーション(PSR)フライバック・コントローラを採用しており、光カプラと 2 次側レギュレーション部品が不要になる結果、このデザインではバイポーラ・パワー・スイッチを採用していっそうのコスト削減を達成できます。また、このデザインでは TPS2511 USB (...)
      試験報告書: PDF
      回路図: PDF
      リファレンス・デザイン

      PMP4344 — ユニバーサル AC 入力 5V@1.2A キューブ・チャージャ、10mW 未満の無負荷電力

      このリファレンス・デザインでは、 5V 1.2A のキューブ・チャージャとして低コストの単一 PCB ソリューションを示します。1 次側レギュレーション(PSR)モードのチップである UCC28710 を使用して、無負荷時消費電力 < 10mW を達成しています。全体のサイズは、22mm(奥行き)x 21mm(幅)x 20mm(高さ)という限られた体積です。
      試験報告書: PDF
      リファレンス・デザイン

      PMP8363 — 85VAC-265VAC 入力、 5V@2A Eco-Charger、タブレット/スマートフォン用

      This reference design uses the UCC28710 in a quasi-resonant flyback to generate an isolated 5V at up to 2A. This design is over 80% efficient while charging a device. In addition, the energy saving features of the UCC28710 allow this design to consume less than 20mW when plugged into an outlet (...)
      試験報告書: PDF
      回路図: PDF
      リファレンス・デザイン

      PMP8286 — ユニバーサル AC 入力、5V@2.1A、スマート USB チャージャ・キューブ

      このリファレンス・デザインでは、UCC28700 を疑似共振フライバックで使用し、5V の絶縁型出力を生成して最大 2.1A を供給します。UCC28700 によって 1 次側レギュレーションが実装されるため、光カプラが不要になり、合計部品点数が減ります。この結果、コンパクトでコスト効率に優れたデザインが実現します。この設計で実装する基板は、1 インチ x 1 インチ x 1 インチ(2.54cm x 2.54cm x 2.54cm)の体積を占めます。また、TPS2511 USB (...)
      試験報告書: PDF
      リファレンス・デザイン

      PMP7390 — デュアル・ポート、車載、USB チャージャ・リファレンス・デザイン

      TPS40170 PWM 降圧コントローラを使用するこのパワー・マネージメント・リファレンス・デザインでは、小型フォーム・ファクタで、5V の安定化電源を 2 つの USB ポートにそれぞれ 2.1A(合計 4.2A)で提供します。この設計は、公称 12V 入力に最適化されており、8 ~ 60V を受容します。
      試験報告書: PDF
      回路図: PDF
      リファレンス・デザイン

      PMP7388 — 9~40V オートモーティブ入力、5V@2.1A、スマート USB チャージャ

      このリファレンス・デザインは、カー・バッテリの電力を利用する車載用 USB チャージャ・ソリューションです。
      9V ~ 40V DC 入力から、スマートフォンやタブレットの充電に適した 5V/2.1A 出力を生成します。
      試験報告書: PDF
      回路図: PDF
      パッケージ ピン数 ダウンロード
      HVSSOP (DGN) 8 オプションの表示

      購入と品質

      記載されている情報:
      • RoHS
      • REACH
      • デバイスのマーキング
      • リード端子の仕上げ / ボールの原材料
      • MSL 定格 / ピーク リフロー
      • MTBF/FIT 推定値
      • 材質成分
      • 認定試験結果
      • 継続的な信頼性モニタ試験結果
      記載されている情報:
      • ファブの拠点
      • 組み立てを実施した拠点

      サポートとトレーニング

      TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

      コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

      TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

      ビデオ