ホーム インターフェイス USB IC USB Type-C と USB パワー・デリバリ (電力供給) IC

TPS25772-Q1

アクティブ

車載対応、昇降圧レギュレータとスマート・パワー・マネージメント機能搭載、デュアル・ポート USB Type-C® PD コントローラ

製品詳細

Function Type-C Type DC/DC converter, PD controller Power role Source Alternate mode No External power-path control I2C Data role Dataless Internal power path 20 V 3 A Rating Automotive Dead battery support No Operating temperature range (°C) -40 to 125
Function Type-C Type DC/DC converter, PD controller Power role Source Alternate mode No External power-path control I2C Data role Dataless Internal power path 20 V 3 A Rating Automotive Dead battery support No Operating temperature range (°C) -40 to 125
VQFN-HR (RQL) 29 30 mm² 6 x 5
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C2b
    • Enhanced connector pin ESD protection
  • USB Power Delivery (PD) controller with Programmable Power Supply (PPS) support
    • Wide V IN: 5.5 V to 18 V (40-V maximum)
    • Integrated buck-boost 4 power switches supporting up to 65-W USB PD output power
    • V BUS output: 3–21 V with ±20-mV step size
    • I BUS output: 0–3A with ±50-mA current limit step size
    • V BUS short circuit to V BAT and GND protection
    • V BUS cable droop compensation
    • MFi overcurrent protection
    • Switching frequency: 300, 400, 450 kHz
    • DC/DC sync in/out with dithering
  • USB port configurations options
    • 1 USB-PD Port (TPS25762-Q1)
    • 2 USB-PD Ports (TPS25772-Q1)
  • Compliant to USB
    • USB Type-C Power Delivery Rev 3.1
      • TPS25762-Q1: USB–IF certification with PPS, TID: 9509
      • TPS25772-Q1: USB–IF certification with PPS, TID: 9161
      • CC logic, V CONN source and discharge
      • USB cable polarity detection
    • Battery charging specification rev 1.2
      • DCP: Dedicated Charging Port
  • Legacy Fast Charging
    • 2.7-V divider-3 mode
    • 1.2-V divider mode
    • High Voltage DCP Protocol
  • Microcontroller core allows
  • Short to V BUS and V BAT protection
    • V BUS
    • Px_ DP and Px_DM
    • Px_CC1 and Px_CC2
  • HotRod™ QFN package with wettable flank
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C2b
    • Enhanced connector pin ESD protection
  • USB Power Delivery (PD) controller with Programmable Power Supply (PPS) support
    • Wide V IN: 5.5 V to 18 V (40-V maximum)
    • Integrated buck-boost 4 power switches supporting up to 65-W USB PD output power
    • V BUS output: 3–21 V with ±20-mV step size
    • I BUS output: 0–3A with ±50-mA current limit step size
    • V BUS short circuit to V BAT and GND protection
    • V BUS cable droop compensation
    • MFi overcurrent protection
    • Switching frequency: 300, 400, 450 kHz
    • DC/DC sync in/out with dithering
  • USB port configurations options
    • 1 USB-PD Port (TPS25762-Q1)
    • 2 USB-PD Ports (TPS25772-Q1)
  • Compliant to USB
    • USB Type-C Power Delivery Rev 3.1
      • TPS25762-Q1: USB–IF certification with PPS, TID: 9509
      • TPS25772-Q1: USB–IF certification with PPS, TID: 9161
      • CC logic, V CONN source and discharge
      • USB cable polarity detection
    • Battery charging specification rev 1.2
      • DCP: Dedicated Charging Port
  • Legacy Fast Charging
    • 2.7-V divider-3 mode
    • 1.2-V divider mode
    • High Voltage DCP Protocol
  • Microcontroller core allows
  • Short to V BUS and V BAT protection
    • V BUS
    • Px_ DP and Px_DM
    • Px_CC1 and Px_CC2
  • HotRod™ QFN package with wettable flank

The TPS25772-Q1 is a fully integrated dual-port USB Type-C® Power Delivery (PD) solution with integrated buck-boost converter for automotive dual USB port applications. Functionality includes: integrated Buck-Boost converter with 4 power switches; an ARM Cortex-M0; USB port controller with Type-C cable plug and orientation detection; USB Battery Charging Specification Version 1.2 (BC1.2) detection; USB Endpoint PHY; device power management and supervisory circuitry; and connector pin protection over-voltage and short-circuit protection;

An intelligent System Policy Manager maximizes delivered USB power while protecting the system from automotive battery transient and over-temperature conditions.

Device configuration settings are selected through an intuitive graphical user interface (GUI).

The TPS25772-Q1 is a fully integrated dual-port USB Type-C® Power Delivery (PD) solution with integrated buck-boost converter for automotive dual USB port applications. Functionality includes: integrated Buck-Boost converter with 4 power switches; an ARM Cortex-M0; USB port controller with Type-C cable plug and orientation detection; USB Battery Charging Specification Version 1.2 (BC1.2) detection; USB Endpoint PHY; device power management and supervisory circuitry; and connector pin protection over-voltage and short-circuit protection;

An intelligent System Policy Manager maximizes delivered USB power while protecting the system from automotive battery transient and over-temperature conditions.

Device configuration settings are selected through an intuitive graphical user interface (GUI).

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
TPS25762-Q1 アクティブ 車載対応、昇降圧レギュレータ内蔵、USB Type-C® PD コントローラ Automotive single USB PD controller

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
12 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS25772-Q1 Automotive Dual USB Type-C® Power Delivery Controller with Buck-Boost Regulator データシート (Rev. A) PDF | HTML 2023年 9月 18日
技術記事 Efficient, affordable USB power delivery for vehicle infotainment PDF | HTML 2024年 3月 1日
ユーザー・ガイド TPS257XX-Q1-GUI Configuration Guide (Rev. B) PDF | HTML 2024年 2月 26日
アプリケーション・ノート TPS257xx-Q1 Pass Compliance and QuadraMAX Best Practice PDF | HTML 2024年 2月 6日
アプリケーション・ノート TPS2576x/TPS2577x-Q1 Source Power Policy Management (Rev. A) PDF | HTML 2023年 11月 8日
アプリケーション概要 TPS257x2-Q1 Startup with Astable Supply Voltage PDF | HTML 2023年 9月 19日
アプリケーション・ノート TPS257x-Q1/77x-Q1 Firmware Update with a Host (Rev. A) PDF | HTML 2023年 8月 9日
EVM ユーザー ガイド (英語) TPS25762/72-Q1 EVM User's Guide PDF | HTML 2022年 11月 30日
証明書 TPS25772Q1EVM-149 EU RoHS Declaration of Conformity (DoC) (Rev. A) 2022年 11月 11日
証明書 TPS25772Q1EVM-150 EU RoHS Declaration of Conformity (DoC) 2022年 11月 8日
アプリケーション概要 TI Automotive USB Charging Port Solution PDF | HTML 2022年 2月 18日
証明書 TPS25772Q1EVM-CD-150 EU RoHS Declaration of Conformity (DoC) (Rev. A) 2021年 4月 19日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS25772Q1EVM-CD-150 — TPS25772-Q1 USB 2.0 ハブ搭載、デュアルポート USB Type-C®パワー デリバリ チャージャの評価基板

TPS25772Q1EVM-150 は、TPS25772-Q1 向けの評価基板 (EVM) です。この IC は、デュアル USB ポート アプリケーション向けの高集積 USB Type-C® PD (パワー デリバリ) コントローラであり、充電専用の用途と、充電に加えて USB 2.0 または USB 3.0 のデータも取り扱う用途に対応しています。この評価基板 (EVM) は、デュアル ポート充電に加えて USB 2.0 のデータをサポートしています。

ユーザー ガイド: PDF | HTML
評価ボード

TPS25772Q1EVM-CO-149 — TPS25772-Q1 デュアル ポート、USB Type-C® パワー デリバリ (PD) チャージャの評価基板

TPS25772Q1EVM-149 は、TPS25772-Q1 向けの評価基板 (EVM) です。この IC は、デュアル USB ポート アプリケーション向けの高集積 USB Type-C® PD (パワー デリバリ) コントローラであり、充電専用の用途と、充電に加えて USB 2.0 または 3.0 のデータも取り扱う用途に対応しています。この評価基板 (EVM) は、デュアル ポート充電のみをサポートしています。

ユーザー ガイド: PDF | HTML
評価基板 (EVM) 向けの GUI

TPS257XX-Q1-GUI Graphical user interface for the TPS2576x-Q1 and TPS2577x-Q1 USB Power Delivery controller device family and EVMs

The TPS257XX-Q1-GUI enables application-specific device configuration and programming of the TPS2576x-Q1 and TPS2577x-Q1 USB Power Delivery controller device family. The GUI is compatible with the corresponding hardware evaluation modules (EVMs) as well as custom hardware designs using the (...)

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
USB Type-C と USB パワー・デリバリ (電力供給) IC
TPS25772-Q1 車載対応、昇降圧レギュレータとスマート・パワー・マネージメント機能搭載、デュアル・ポート USB Type-C® PD コントローラ TPS25762-Q1 車載対応、昇降圧レギュレータ内蔵、USB Type-C® PD コントローラ
ハードウェア開発
評価ボード
TPS25762Q1EVM TPS25762-Q1 シングル ポート USB Type-C® パワー デリバリ (PD) コントローラの評価基板 TPS25772Q1EVM-CO-149 TPS25772-Q1 デュアル ポート、USB Type-C® パワー デリバリ (PD) チャージャの評価基板 TPS25772Q1EVM-CD-150 TPS25772-Q1 USB 2.0 ハブ搭載、デュアルポート USB Type-C®パワー デリバリ チャージャの評価基板
計算ツール

TPS257XX-Q1-EFFICIENCY-CALC TPS257xx-Q1 power loss and efficiency calculation spreadsheet

TPS257XX-Q1-EFFICIENCY-CALC is a spreadsheet tool used to estimate power loss and efficiency calculation results for the TPS2576x-Q1 and TPS2577x-Q1 devices. Results are calculated based on fixed device parameters and user-defined parameters.
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
USB Type-C と USB パワー・デリバリ (電力供給) IC
TPS25772-Q1 車載対応、昇降圧レギュレータとスマート・パワー・マネージメント機能搭載、デュアル・ポート USB Type-C® PD コントローラ TPS25762-Q1 車載対応、昇降圧レギュレータ内蔵、USB Type-C® PD コントローラ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
シミュレーション・ツール

TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム

TINA-TI は、DC 解析、過渡解析、周波数ドメイン解析など、SPICE の標準的な機能すべてを搭載しています。TINA には多彩な後処理機能があり、結果を必要なフォーマットにすることができます。仮想計測機能を使用すると、入力波形を選択し、回路ノードの電圧や波形を仮想的に測定することができます。TINA の回路キャプチャ機能は非常に直観的であり、「クイックスタート」を実現できます。

TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)

TINA は DesignSoft (...)

ユーザー ガイド: PDF
英語版 (Rev.A): PDF
リファレンス・デザイン

PMP40933 — 車載対応、CISPR 25 Class 5、400kHz 定格、120W、デュアル USB Type-C® PD チャージャのリファレンス・デザイン

このリファレンス・デザインは、車載対応デュアル USB Type-C® パワー・デリバリ (PD) チャージャ向けに、EMI (電磁干渉) を最適化した設計であり、ポートあたり 60W を供給します。TPS25772-Q1 は、昇降圧レギュレータを搭載したデュアル Type-C PD コントローラとして使用します。TPS55288-Q1 は、別のポート向けの昇降圧レギュレータとして使用します。このリファレンス・デザインの最大効率は 96.45% です。CISPR 25 Class 5 の厳格な伝導型 EMI (電磁干渉) 規格に合格するように、フロント・エンド・フィルタの設計と、PCB (...)
試験報告書: PDF
パッケージ ピン数 ダウンロード
VQFN-HR (RQL) 29 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ