ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧 コントローラ (外部スイッチ)

TPS51610

アクティブ

IMVP6+ CPU/GPU の Vcore 向け、単相、D-CAP+™ モード、降圧コントローラ

製品詳細

Vin (min) (V) 3 Vin (max) (V) 28 Vout (min) (V) 0.3 Vout (max) (V) 1.5 Iout (max) (A) 60 Iq (typ) (mA) 1.8 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 500 Features Power good Operating temperature range (°C) -40 to 105 Regulated outputs (#) 1 Number of phases 1 Rating Catalog Control mode D-CAP+ Type Controller
Vin (min) (V) 3 Vin (max) (V) 28 Vout (min) (V) 0.3 Vout (max) (V) 1.5 Iout (max) (A) 60 Iq (typ) (mA) 1.8 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 500 Features Power good Operating temperature range (°C) -40 to 105 Regulated outputs (#) 1 Number of phases 1 Rating Catalog Control mode D-CAP+ Type Controller
VQFN (RHB) 32 25 mm² 5 x 5
  • Minimum External Parts Count
  • Full IMVP6+ Compliance, Including VRTT and Output Power Monitor
  • Dual Mode DAC supports 5-Bit and 7-Bit VIDs
  • 0.3-V to 1.5-V Output Range
  • ±8 mV VCORE Accuracy Over Line/Load/Temp
  • Optimized Efficiency at Light and Heavy Loads
  • Patented Output Overshoot Reduction (OSR) Reduces Output Capacitance
  • Accurate, Adjustable Voltage Positioning
  • Selectable 200/300/400/500 kHz Frequency
  • 3-V to 28-V Conversion Voltage Range
  • Fast FET Driver w/Integrated Boost Diode
  • Integrated OVP Can Be Disabled
  • Available in 5 × 5, 32-Pin QFN PowerPAD Package
  • APPLICATIONS
    • IMVP6+ Single-Phase CPU and GPU VCORE Applications
  • Minimum External Parts Count
  • Full IMVP6+ Compliance, Including VRTT and Output Power Monitor
  • Dual Mode DAC supports 5-Bit and 7-Bit VIDs
  • 0.3-V to 1.5-V Output Range
  • ±8 mV VCORE Accuracy Over Line/Load/Temp
  • Optimized Efficiency at Light and Heavy Loads
  • Patented Output Overshoot Reduction (OSR) Reduces Output Capacitance
  • Accurate, Adjustable Voltage Positioning
  • Selectable 200/300/400/500 kHz Frequency
  • 3-V to 28-V Conversion Voltage Range
  • Fast FET Driver w/Integrated Boost Diode
  • Integrated OVP Can Be Disabled
  • Available in 5 × 5, 32-Pin QFN PowerPAD Package
  • APPLICATIONS
    • IMVP6+ Single-Phase CPU and GPU VCORE Applications

The TPS51610 is a fully Intel-compliant single-phase synchronous buck controller with integrated gate drivers designed for use in low-power CPUs and Intel integrated Graphics solutions for IMVP-6+ generation notebook systems. Advanced control features such as D-CAP architecture and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51610 DAC provides the 5-bit graphics "render" VID. The TPS51610 provides the full compliment of IMVP6+ I/O including VR_TT, and PMON. Adjustable control of VCORE slew rate and voltage positioning round out the IMVP6+ features. In addition, the TPS51610 includes two high-current FET gate drivers to drive external N-channel FETs with low switching loss. The TPS51610 is available in the 5 × 5, 32-pin QFN and is rated to operate from -10°C to 105°C

The TPS51610 is a fully Intel-compliant single-phase synchronous buck controller with integrated gate drivers designed for use in low-power CPUs and Intel integrated Graphics solutions for IMVP-6+ generation notebook systems. Advanced control features such as D-CAP architecture and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51610 DAC provides the 5-bit graphics "render" VID. The TPS51610 provides the full compliment of IMVP6+ I/O including VR_TT, and PMON. Adjustable control of VCORE slew rate and voltage positioning round out the IMVP6+ features. In addition, the TPS51610 includes two high-current FET gate drivers to drive external N-channel FETs with low switching loss. The TPS51610 is available in the 5 × 5, 32-pin QFN and is rated to operate from -10°C to 105°C

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Single Phase, D-CAP+(tm) Synchronous Buck Controller データシート 2008年 7月 2日
ユーザー・ガイド Single-Phase, D-CAP+ Synchronous Buck Controller for Intel Atom Applications 2010年 6月 16日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

TPS51610, TPS51620-1 PSpice Model

SLUC161.PDF (25 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP5835 — 同期整流・降圧(14A@1.15V)、ノートブック・コンピュータ用

産業用 PC 用の、12VIN Intel Atom E6xx(Tunnel Creek)CPU コア電源設計です。この設計は、小さい CPU コア・レギュレータ電源面積を実現するとともに、産業用オートメーションおよびプロセス制御で使用される COM Express モジュールおよびシングル・ボード・コンピュータの重要な設計要件の 1 つである優れた放熱性能を実現します。
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP5114 — Intel IMVP6+ Atom CPU コア・パワー・デザイン

High power density Intel IMVP6+ Atom CPU Core power supply for Embedded PCs; this design enables high power density and flexible configuration with the use of discrete TI NexFETs while meeting all Intel specifications
試験報告書: PDF
回路図: PDF
リファレンス・デザイン

PMP5486 — 同期整流・降圧、Intel IMVP6+ Atom 用

Atom IMVP6+ パワー・マネージメント・デザインは、プロセッサのコアへの電力供給を実現します。この同期整流・降圧コントローラは、特に IMVP モバイル・プロセッサへの電力供給用に設計されており、TI の D-CAP+ コントロールを実装することで、部品点数を減らし、厳しい電圧レギュレーション精度を維持し、過渡応答性能を向上させています。また、この設計では、TI の NexFET パワー・ブロックを装備しているため、ソリューション全体のサイズを削減できます。
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VQFN (RHB) 32 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ