ホーム パワー・マネージメント LED ドライバ バックライト LED ドライバ

TPS61169

アクティブ

TPS61169 38V 大電流昇圧 WLED ドライバ

製品詳細

Number of channels 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 38 Type Inductive Switching frequency (max) (kHz) 1500 Duty cycle (max) (%) 100 LED current per channel (mA) 400 Peak efficiency (%) 90 Topology Boost Features OVP, PWM control Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 38 Type Inductive Switching frequency (max) (kHz) 1500 Duty cycle (max) (%) 100 LED current per channel (mA) 400 Peak efficiency (%) 90 Topology Boost Features OVP, PWM control Operating temperature range (°C) -40 to 85 Rating Catalog
SOT-SC70 (DCK) 5 4.2 mm² 2 x 2.1
  • 2.7-V to 5.5-V Input Voltage
  • Integrated 40-V, 1.8-A MOSFET
  • Drives LED String up to 38 V
  • 1.2-A Minimum Switch Current Limit
  • 1.2-MHz Switching Frequency
  • 204-mV Reference Voltage
  • Internal Compensation
  • PWM Brightness Control
  • Open LED Protection
  • Undervoltage Protection
  • Built-in Soft-Start
  • Thermal Shutdown
  • Up to 90% Efficiency
  • 2.7-V to 5.5-V Input Voltage
  • Integrated 40-V, 1.8-A MOSFET
  • Drives LED String up to 38 V
  • 1.2-A Minimum Switch Current Limit
  • 1.2-MHz Switching Frequency
  • 204-mV Reference Voltage
  • Internal Compensation
  • PWM Brightness Control
  • Open LED Protection
  • Undervoltage Protection
  • Built-in Soft-Start
  • Thermal Shutdown
  • Up to 90% Efficiency

With a 40-V rated integrated switch FET, the TPS61169 is a boost converter that drives LEDs in series. The boost converter has a 40-V, 1.8-A internal MOSFET with minimum 1.2-A current limit; thus it can drive single or parallel LED strings for small- to large-size panel backlighting. The default white LED current is set with the external sensor resistor, RSET, and the feedback voltage is regulated to 204 mV, as shown in the . During the operation, the LED current can be controlled by using a pulse width modulation (PWM) signal applied to the CTRL pin, through which the duty cycle determines the feedback reference voltage. The TPS61169 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61169 to prevent the output voltage from exceeding the absolute maximum voltage ratings of the device during open LED conditions.

The TPS61169 is available in a space-saving 5-pin SC70 package.

For all available packages, see the orderable addendum at the end of the data sheet.

With a 40-V rated integrated switch FET, the TPS61169 is a boost converter that drives LEDs in series. The boost converter has a 40-V, 1.8-A internal MOSFET with minimum 1.2-A current limit; thus it can drive single or parallel LED strings for small- to large-size panel backlighting. The default white LED current is set with the external sensor resistor, RSET, and the feedback voltage is regulated to 204 mV, as shown in the . During the operation, the LED current can be controlled by using a pulse width modulation (PWM) signal applied to the CTRL pin, through which the duty cycle determines the feedback reference voltage. The TPS61169 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61169 to prevent the output voltage from exceeding the absolute maximum voltage ratings of the device during open LED conditions.

The TPS61169 is available in a space-saving 5-pin SC70 package.

For all available packages, see the orderable addendum at the end of the data sheet.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
TPS61161 アクティブ デジタルと PWM の各輝度制御機能搭載、2mm × 2mm WSON パッケージ封止、白色 LED ドライバ This product is a high-brightness, single string white LED driver.
TPS61165 アクティブ 2mm x 2mm QFN パッケージ、高輝度白色 LED ドライバ This product is a high-brightness, single string white LED driver.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS61169 38-V High Current-Boost WLED Driver With PWM Control データシート (Rev. A) PDF | HTML 2016年 3月 18日
ホワイト・ペーパー Common LED Functions and LED Driver Design Considerations.. 英語版 2020年 9月 21日
技術記事 Overcoming common design challenges in an UV sterilization box system PDF | HTML 2020年 7月 27日
アプリケーション・ノート Simple Backlight Driver Dimming Performance 2017年 3月 20日
アプリケーション・ノート Analog PWM Dimming in White-LED Drivers 2016年 12月 21日
アプリケーション・ノート Inductor Selection in Boost Converters for LCD Backlight Applications 2016年 10月 24日
アプリケーション・ノート Schottky Diode Selection in Asynchronous Boost Converters 2016年 9月 6日
ユーザー・ガイド Using the TPS61169 Evaluation Module 2014年 11月 11日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS61169EVM — TPS61169EVM WLED ドライバ評価ボード

The Texas Instruments TPS61169EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS61169, which are WLED driver providing highly integrated solutions for single-cell Li-ion battery powered backlight for small and media form factor LCD display.  The EVM (...)

ユーザー ガイド: PDF
シミュレーション・モデル

TPS61169 TINA-TI Reference Design

SNVMBI4.TSC (3026 KB) - TINA-TI Reference Design
シミュレーション・モデル

TPS61169 TINA-TI Transient Spice Model

SNVMBI5.ZIP (48 KB) - TINA-TI Spice Model
シミュレーション・モデル

TPS61169 Unencrypted PSpice Transient Model Package (Rev. B)

SNVMAV9B.ZIP (389 KB) - PSpice Model
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-01579 — 画像処理アプリケーション向け、高効率、低出力リップル電源のリファレンス・デザイン

The point-of-load power-tree on video surveillance systems is optimized with this reference design. This reference design has a high performance on key parameters such as output voltage accuracy, voltage ripple, and thermal dissipation. This high performance is possible with a small board area and (...)
設計ガイド: PDF
回路図: PDF
リファレンス・デザイン

TIDA-01586 — 日中/夜間撮影可能な IP ネットワーク・カメラ向け IR LED 照明 / ICR 制御のリファレンス・デザイン

This reference design showcases an Infrared LED illumination sub-system for Internet Protocol (IP) network cameras with day and night vision. The system features a cut filter control, LED dimming, ambient light measuring and ballasting for current of each IR LED string. Ballasting is an (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
SOT-SC70 (DCK) 5 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ