ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 降圧 (バック) レギュレータ 降圧コンバータ (スイッチ内蔵)

TPS62903

アクティブ

1.5mm × 2mm の QFN パッケージ封止、3V ~ 17V、3A、高効率、低静止電流 (IQ)、降圧コンバータ

製品詳細

Vin (min) (V) 3 Vin (max) (V) 17 Vout (min) (V) 0.4 Vout (max) (V) 5.5 Iout (max) (A) 3 Iq (typ) (mA) 0.004 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 150 Rating Catalog Regulated outputs (#) 1 Control mode DCS-Control Duty cycle (max) (%) 100 Type Converter
Vin (min) (V) 3 Vin (max) (V) 17 Vout (min) (V) 0.4 Vout (max) (V) 5.5 Iout (max) (A) 3 Iq (typ) (mA) 0.004 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Power good, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Operating temperature range (°C) -40 to 150 Rating Catalog Regulated outputs (#) 1 Control mode DCS-Control Duty cycle (max) (%) 100 Type Converter
VQFN-HR (RPJ) 9 3 mm² 2 x 1.5
  • High efficiency for wide duty cycle and load range
    • IQ: 4-µA typical
    • Selectable switching frequency: 2.5 MHz and 1.0 MHz
    • RDS(ON): 62-mΩ high side, 22-mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5-mm × 2.0-mm VQFN package with 0.5-mm pitch
  • Up to 3-A continuous output current
  • ±0.9% feedback voltage accuracy across temp (-40°C to 150°C)
  • Configurable ouput voltage options:
    • VFB external divider: 0.6 V to 5.5 V
    • VSET internal divider: 16 options between 0.4 V and 5.5 V
  • DCS-Control™ topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62903 using the WEBENCH Power Designer
  • High efficiency for wide duty cycle and load range
    • IQ: 4-µA typical
    • Selectable switching frequency: 2.5 MHz and 1.0 MHz
    • RDS(ON): 62-mΩ high side, 22-mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5-mm × 2.0-mm VQFN package with 0.5-mm pitch
  • Up to 3-A continuous output current
  • ±0.9% feedback voltage accuracy across temp (-40°C to 150°C)
  • Configurable ouput voltage options:
    • VFB external divider: 0.6 V to 5.5 V
    • VSET internal divider: 16 options between 0.4 V and 5.5 V
  • DCS-Control™ topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62903 using the WEBENCH Power Designer

The TPS62903 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ± 1% with the DCS-Control topology. The wide input voltage range of 3 V to 17 V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPS62903 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/Smart-CONF input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50 mm × 2.00 mm with 0.5-mm pitch.

The TPS62903 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ± 1% with the DCS-Control topology. The wide input voltage range of 3 V to 17 V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPS62903 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/Smart-CONF input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50 mm × 2.00 mm with 0.5-mm pitch.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
TPS62901 アクティブ 1.5mm × 2mm の QFN パッケージ封止、3V ~ 17V、1A、高効率、低静止電流 (IQ)、降圧コンバータ Pin-to-pin 1-A output current
TPS62902 アクティブ 1.5mm × 2mm の QFN パッケージ封止、3V ~ 17V、2A、高効率、低静止電流 (IQ)、降圧コンバータ Pin-to-pin 2-A output current
比較対象デバイスと同等の機能で、ピン配置が異なる製品
NEW TPS62903-Q1 アクティブ 車載対応、165℃ の TJ (接合部温度) 対応、3V ~ 18V、3A、低静止電流 (IQ)、同期整流降圧コンバータ Grade 1 AEC-Q100-qualified for automotive with extended junction temperature up to 165C
TPSM82903 アクティブ インダクタ内蔵、3V ~ 17V、3A、高効率、低静止電流 (IQ)、同期整流降圧コンバータ モジュール Module equivalent with integrated inductor

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS62903, 3-V to 17-V, High Efficiency and Low IQ Buck Converter in 1.5-mm × 2-mm QFN Package データシート (Rev. A) PDF | HTML 2021年 3月 18日
アプリケーション・ノート Using the TPS6290x in an Inverting Buck – Boost Topology PDF | HTML 2022年 7月 12日
アプリケーション・ノート How to Best Use TPS62903 for a Given Application Requirement PDF | HTML 2021年 8月 13日
アプリケーション・ノート Comparison of TPS6290x vs. TPS621x0 PDF | HTML 2021年 7月 23日
アプリケーション概要 Multi-Function Pins for Easy Designing PDF | HTML 2021年 7月 7日
技術記事 Which pinout is best? How individual, multifunctional and trimmed pinouts help add PDF | HTML 2021年 6月 28日
EVM ユーザー ガイド (英語) TPS6290x Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 5月 7日
証明書 TPS62903EVM-069 EU RoHS Declaration of Conformity (DoC) 2020年 12月 15日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TMDSCNCD263P — AM263Px Arm® ベース・マイコン向け、汎用 controlCARD™ 開発キット

TMDSCNCD263P は、HSEC180 controlCARD をベースとする、Sitara™ 高性能マイコンである AM263Px シリーズ向けの評価 / 開発ツールです。このボードは、初期の評価とプロトタイプ製作に最適です。次期アプリケーションの開発に適した、標準化済みで使いやすいプラットフォームを実現します。AM263P 制御カードは、Sitara AM263P4 プロセッサと PMIC ベースの電源ソリューションおよび付加的なコンポーネントを採用しています。開発ユーザーは、産業用イーサネット、標準的なイーサネット、高速シリアル・インターフェイス (FSI) (...)

ユーザー ガイド: PDF | HTML
評価ボード

TPS62903EVM-069 — 1.5mm x 2mm QFN パッケージ封止、17VIN、3A、低静止電流 (IQ) 降圧コンバータの評価基板

TPS62903EVM-069 (BSR069-003) 評価基板を使用すると、1.5mm x 2mm の小型 QFN パッケージに封止した 3A 降圧コンバータである TPS62903 を評価できます。この評価基板 (EVM) は、3V ~ 17V の入力電圧範囲で動作し、1.2V の出力電圧を供給します。TPS62903 は高効率、低静止電流 (IQ) の降圧コンバータであり、ファクトリ オートメーションやビル オートメーション、IP ネットワーク カメラ、産業用 PC、データセンター スイッチ、サーボ ドライブ、モバイル (...)
ユーザー ガイド: PDF | HTML
シミュレーション・モデル

TPS62903 PSpice Transient Model

SLVMDN8.ZIP (290 KB) - PSpice Model
シミュレーション・モデル

TPS62903 SIMPLIS Transient and Average Model

SLVMDP3.ZIP (945 KB) - SIMPLIS Model
ガーバー・ファイル

BSR069A Gerbers

SNVC242.ZIP (394 KB)
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

TIDA-050052 — 電力密度の高い降圧 DC/DC コンバータのリファレンス・デザイン

TIDA-050052 リファレンス・デザインは、TPS62903 を使用し、3V ~ 17V VIN を受け入れる降圧型電圧コンバータであり、設計スペースが非常に限定されているアプリケーションに最適です。このリファレンス・デザインは、入力電圧を 1.2V の VOUT に降圧変換し、高効率かつ低静止電流で最大 3A を供給できます。このデザインが使用しているインダクタは、DCR (直流抵抗) が約 48mΩ の 1μH インダクタです。すべての外部部品を含めたトータル ソリューション サイズは 25mm2 であり、業界最小の動作時静止電流 (IQ) を達成する、小型ソリューション (...)
設計ガイド: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VQFN-HR (RPJ) 9 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ