ホーム パワー・マネージメント DC/DC スイッチング・レギュレータ 昇降圧 / 反転レギュレータ 昇降圧、反転、および分割レールの各コンバータ (スイッチ内蔵)

TPS63020-Q1

アクティブ

高効率、オートモーティブ・シングル・インダクタ、昇降圧コンバータ、4A スイッチ付

製品詳細

Topology Buck-Boost Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Duty cycle (max) (%) 100 Features Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Power good, Synchronous Rectification, UVLO Fixed Switch current limit (typ) (A) 4 Switching frequency (min) (kHz) 2200 Switching frequency (max) (kHz) 2600 Iq (typ) (mA) 0.025 Iout (max) (A) 2 Rating Automotive Operating temperature range (°C) -40 to 125 Type Converter Thermal resistance θJA (°C/W) 41.8
Topology Buck-Boost Vin (min) (V) 1.8 Vin (max) (V) 5.5 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Duty cycle (max) (%) 100 Features Enable, Frequency synchronization, Light Load Efficiency, Load Disconnect, Power good, Synchronous Rectification, UVLO Fixed Switch current limit (typ) (A) 4 Switching frequency (min) (kHz) 2200 Switching frequency (max) (kHz) 2600 Iq (typ) (mA) 0.025 Iout (max) (A) 2 Rating Automotive Operating temperature range (°C) -40 to 125 Type Converter Thermal resistance θJA (°C/W) 41.8
VSON (DSJ) 14 12 mm² 4 x 3
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade: –40°C to 125°C
      Operating Junction Temperature Range
    • Device HBM ESD Classification Level H1B
    • Device CDM ESD Classification Level C4A
  • Input Voltage Range: 1.8 V to 5.5 V
  • Up to 96% Efficiency
  • 3 A Output Current at 3.3 V in Step Down Mode
    (VIN > 3.6 V)
  • More than 2 A Output Current at 3.3 V in Boost
    Mode (VIN > 2.5 V)
  • Automatic Transition Between Step Down and
    Boost Mode
  • Dynamic Input Current Limit
  • Device Quiescent Current less than 50 µA
  • Adjustable Output Voltage Range from 1.2 V to
    5.5 V
  • Power Save Mode for Improved Efficiency at
    Low Output Power
  • Forced Fixed Frequency Operation at 2.4 MHz
    and Synchronization Possible
  • Smart Power Good Output
  • Load Disconnect During Shutdown
  • Overtemperature Protection
  • Overvoltage Protection
  • Available in a 3-mm × 4-mm, VSON-14 Package
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade: –40°C to 125°C
      Operating Junction Temperature Range
    • Device HBM ESD Classification Level H1B
    • Device CDM ESD Classification Level C4A
  • Input Voltage Range: 1.8 V to 5.5 V
  • Up to 96% Efficiency
  • 3 A Output Current at 3.3 V in Step Down Mode
    (VIN > 3.6 V)
  • More than 2 A Output Current at 3.3 V in Boost
    Mode (VIN > 2.5 V)
  • Automatic Transition Between Step Down and
    Boost Mode
  • Dynamic Input Current Limit
  • Device Quiescent Current less than 50 µA
  • Adjustable Output Voltage Range from 1.2 V to
    5.5 V
  • Power Save Mode for Improved Efficiency at
    Low Output Power
  • Forced Fixed Frequency Operation at 2.4 MHz
    and Synchronization Possible
  • Smart Power Good Output
  • Load Disconnect During Shutdown
  • Overtemperature Protection
  • Overvoltage Protection
  • Available in a 3-mm × 4-mm, VSON-14 Package

The TPS63020-Q1 device provides a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-Polymer battery. Output currents can go as high as 3 A while using a single-cell Li-Ion or Li-Polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 4 A. The output voltage is programmable using an external resistor divider. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 3 mm × 4 mm 14-pin VSON PowerPAD™ package (DSJ).

The TPS63020-Q1 device provides a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-Polymer battery. Output currents can go as high as 3 A while using a single-cell Li-Ion or Li-Polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 4 A. The output voltage is programmable using an external resistor divider. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 3 mm × 4 mm 14-pin VSON PowerPAD™ package (DSJ).

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
TPS63020 アクティブ 高効率、シングル・インダクタ、昇降圧コンバータ、4A スイッチ付 Non-Q1 version

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS63020-Q1 High Efficiency Single Inductor Buck-Boost Converter With 4-A Switches データシート (Rev. A) PDF | HTML 2015年 12月 28日
アプリケーション・ノート Different Methods to Drive LEDs Using TPS63XXX Buck-Boost Converters (Rev. D) 2021年 8月 4日
アプリケーション・ノート Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) PDF | HTML 2021年 6月 9日
アプリケーション・ノート Understanding Undervoltage Lockout in Power Devices (Rev. A) 2018年 9月 19日
技術記事 A complete low-voltage backup battery solution for eCall systems PDF | HTML 2016年 3月 5日
技術記事 Why do you need a 5.5Vin buck-boost in a car? PDF | HTML 2016年 1月 21日
アプリケーション・ノート TPS63020Q Pin FMEA 2015年 10月 7日
ユーザー・ガイド TPS63020EVM-487 User's Guide 2010年 4月 19日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS63020EVM-487 — 評価モジュール・ボード、4A スイッチ付き TPS63020 バックブースト・コンバータ用

Buck-Boost Converter with 4A Switch Evaluation Module Board

The TPS63020EVM-487 evaluation module is a fully assembled and tested circuit for evaluating the TPS63020 Buck-Boost Converter with 4A Switch. The TPS63020EVM-487 operates from a 1.8V to 5.5V supply and provides a 3.3V output.
ユーザー ガイド: PDF
シミュレーション・モデル

TPS63020 TINA-TI Transient Reference Design

SLIM154.TSC (1688 KB) - TINA-TI Reference Design
シミュレーション・モデル

TPS63020 TINA-TI Transient Spice Model

SLIM155.ZIP (49 KB) - TINA-TI Spice Model
計算ツール

SLVC808 Battery Lifetime Estimator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
昇降圧、反転、および分割レールの各コンバータ (スイッチ内蔵)
TPS63000 1.8A 電流スイッチ搭載、3x3 QFN 封止、高効率、昇降圧コンバータ TPS63000-Q1 車載向け、1.8V ~ 5.5V の入力範囲、1.8A、高効率、昇降圧コンバータ TPS63001 1.7A の電流スイッチ搭載、3.3V 固定出力電圧、3x3 QFN 封止、96% 昇降圧コンバータ TPS63002 1.7A の電流スイッチ搭載、5V 固定出力電圧、3x3 QFN 封止、96% 昇降圧コンバータ TPS63010 2A スイッチ搭載、高効率シングル・インダクタ、昇降圧コンバータ TPS63011 2A スイッチ搭載、高効率シングル・インダクタ、昇降圧コンバータ TPS63012 2A スイッチ搭載、高効率シングル・インダクタ、昇降圧コンバータ TPS63020 高効率、シングル・インダクタ、昇降圧コンバータ、4A スイッチ付 TPS63020-Q1 高効率、オートモーティブ・シングル・インダクタ、昇降圧コンバータ、4A スイッチ付 TPS63021 高効率、シングル・インダクタ、昇降圧コンバータ、4A スイッチ付 TPS63024 高効率 1.5A シングル・インダクタ昇降圧コンバータ TPS630241 高効率 1.5A シングル・インダクタ昇降圧コンバータ TPS630242 高効率 1.5A シングル・インダクタ昇降圧コンバータ TPS630250 3.7mm² の DSBGA パッケージ封止、4A スイッチのシングル・インダクタ昇降圧コンバータ TPS630251 4A スイッチ・シングル・インダクタ昇降圧コンバータ、WCSP パッケージ TPS630252 4A スイッチ・シングル・インダクタ昇降圧コンバータ、WCSP パッケージ TPS63027 高効率、4.5A スイッチ、シングル・インダクタ昇降圧コンバータ TPS63030 1A スイッチ搭載、高効率シングル・インダクタ、昇降圧コンバータ TPS63031 1A スイッチ搭載、高効率シングル・インダクタ、昇降圧コンバータ TPS63036 1A スイッチ搭載、高効率シングル・インダクタ、昇降圧コンバータ TPS63050 TPS6305x 1A スイッチと可変ソフト・スタート機能搭載のシングル・インダクタ昇降圧コンバータ TPS63051 超小型シングル昇降圧コンバータ TPS63060 入力電圧 2.5V ~ 12V、効率 93%、2.25A スイッチ電流制限付き昇降圧コンバータ TPS63060-EP 高入力電圧降昇圧コンバータ、2 Aスイッチ電流機能付き TPS63061 入力電圧 2.5V ~ 12V、効率 93%、2.25A スイッチ電流制限付き昇降圧コンバータ TPS63070 広い入力電圧範囲(2V ~ 16V)の昇降圧コンバータ TPS63700 可変、-15V 出力反転 DC/DC コンバータ、3x3 QFN TPS63710 低ノイズ、1A、反転型同期整流・降圧コンバータ、3x3 WSON パッケージ TPS63802 QFN/DFN パッケージ封止、2A、高効率、静止電流 11μA、昇降圧コンバータ TPS63805 超小型ソリューション・サイズ、2A、高効率、静止電流 11μA、昇降圧コンバータ TPS63806 2.5A 高効率昇降圧コンバータ、超小型 WCSP で最適化された負荷ステップ応答 TPS63807 2A、静止電流が 11μA の昇降圧コンバータ TPS63810 ダイナミック電圧スケーリング向け、I²C インターフェイス搭載、2.5A 高効率昇降圧コンバータ TPS63811 ダイナミック電圧スケーリング向け、I²C インターフェイス搭載、2.5A 高効率昇降圧コンバータ TPS63900 入力電流制限機能とダイナミック電圧スケーリング機能搭載、1.8V ~ 5.5V、75nA の静止電流 (IQ)、昇降圧コンバータ
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
リファレンス・デザイン

PMP9769 — 低中間電圧型車載 eCall 電源のリファレンス・デザイン

このリファレンス・デザインは、車載環境で使用する緊急通報(eCall)システム向けの包括的な電源ソリューションを示します。この回路に対して、自動車のバッテリ・レールから直接電力を供給します。また、自動車のバッテリ・レールが使用できない場合、eCall システムに電力を供給するバックアップ・バッテリも管理します。このデザインは、eCall システムの不可欠な機能ブロックに電力を供給する 4 個の DC/DC (...)
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
VSON (DSJ) 14 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ