ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ 力率改善 (PFC) コントローラ

TPS92210

アクティブ

カスコード接続 MOSFET 付き、LED ライティング用コンスタント・オンタイム・ドライバ・コントローラ

製品詳細

Topology Buck, Flyback Control mode Current Switching frequency (max) (kHz) 133 UVLO thresholds on/off (V) 10.2/8 Vin (max) (V) 20 Features Overcurrent protection, Overtemperature protection, Overvoltage protection, Peak current mode, Transition Control Mode Rating Catalog Operating temperature range (°C) -40 to 125 Duty cycle (max) (%) 2
Topology Buck, Flyback Control mode Current Switching frequency (max) (kHz) 133 UVLO thresholds on/off (V) 10.2/8 Vin (max) (V) 20 Features Overcurrent protection, Overtemperature protection, Overvoltage protection, Peak current mode, Transition Control Mode Rating Catalog Operating temperature range (°C) -40 to 125 Duty cycle (max) (%) 2
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Flexible Operation Modes
    • Constant On-Time Enables Single Stage PFC Implementation
    • Peak Primary Current
  • Cascoded MOSFET Configuration
    • Fully Integrated Current Control Without Sense Resistor
    • Fast and Easy Startup
  • Discontinuous Conduction Mode or Transition Mode Operation
  • Transformer Zero Energy Detection
    • Enables Valley Switching Operation
    • Helps to Achieve High Efficiency and Low EMI
  • Open LED Detection
  • Advanced Overcurrent Protection
  • Output Overvoltage Protection
  • Line Surge Ruggedness
  • Internal Over-Temperature Protection
  • 8-Pin SOIC (D) Package
  • Flexible Operation Modes
    • Constant On-Time Enables Single Stage PFC Implementation
    • Peak Primary Current
  • Cascoded MOSFET Configuration
    • Fully Integrated Current Control Without Sense Resistor
    • Fast and Easy Startup
  • Discontinuous Conduction Mode or Transition Mode Operation
  • Transformer Zero Energy Detection
    • Enables Valley Switching Operation
    • Helps to Achieve High Efficiency and Low EMI
  • Open LED Detection
  • Advanced Overcurrent Protection
  • Output Overvoltage Protection
  • Line Surge Ruggedness
  • Internal Over-Temperature Protection
  • 8-Pin SOIC (D) Package

The TPS92210 is a natural power factor correction (PFC) light emmitting diode (LED) lighting driver controller with advanced energy features to provide high efficiency control for LED lighting applications.

A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation in all regions of operation. The TPS92210 cascode architecture enables low switching loss in the primary side and when combined with the discontinuous conduction mode (DCM) operation ensures that there is no reverse recovery loss in the output rectifier. These innovations result in efficiency, reliability or system cost improvements over a conventional flyback architecture.

The TPS92210 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. The overload fault response is user-programmed for retry or latch mode. Additional protection features include open-LED detection by output overvoltage protection and thermal shutdown.

The TPS92210 is offered in the 8-pin SOIC (D) package. Operating junction temperature range is –40°C to 125°C

The TPS92210 is a natural power factor correction (PFC) light emmitting diode (LED) lighting driver controller with advanced energy features to provide high efficiency control for LED lighting applications.

A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation in all regions of operation. The TPS92210 cascode architecture enables low switching loss in the primary side and when combined with the discontinuous conduction mode (DCM) operation ensures that there is no reverse recovery loss in the output rectifier. These innovations result in efficiency, reliability or system cost improvements over a conventional flyback architecture.

The TPS92210 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. The overload fault response is user-programmed for retry or latch mode. Additional protection features include open-LED detection by output overvoltage protection and thermal shutdown.

The TPS92210 is offered in the 8-pin SOIC (D) package. Operating junction temperature range is –40°C to 125°C

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
10 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Single-Stage PFC Driver Controller for LED Lighting データシート (Rev. B) 2012年 8月 10日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート Line Undervoltage and Overvoltage Protection for TPS92210-Based LED Drivers 2015年 8月 14日
アプリケーション・ノート Extending Dimming Range of TPS92210 Over Universal AC Range by Applying Frequenc 2013年 6月 16日
その他の技術資料 Single-Stage PFC Driver Controller for LED Lighting 2011年 5月 27日
試験報告書 Using the TPS92210-PMP6001, A Universal Input 38V 350mA Non Dimmable LED Driver1 2010年 12月 10日
試験報告書 Using the TPS92210-PMP6002 (Rev. A) 2010年 12月 10日
試験報告書 Using the TPS92210-PMP6003 (Rev. A) 2010年 12月 10日
EVM ユーザー ガイド (英語) Using the TPS92210EVM-647 Natural PFC LED Lighting Driver Controller (Rev. B) 2010年 12月 9日
EVM ユーザー ガイド (英語) Using the TPS92210EVM-613 Natural PFC LED Lighting Driver Controller (Rev. A) 2010年 11月 2日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS92210EVM-613 — TPS92210 評価モジュール、230VAC TRIAC 調光器対応、電球置き換え用、ナチュラル PFC 付

The TPS92210EVM-613 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the TPS92210 in a single stage PFC 230VAC light bulb replacement design that is TRIAC dimmable.
ユーザー ガイド: PDF
評価ボード

TPS92210EVM-647 — TPS92210 評価モジュール、120VAC TRIAC 調光器対応、電球置き換え用、ナチュラル PFC 付

The TPS92210EVM-647 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the TPS92210 in a single stage PFC 120VAC light bulb replacement design that is TRIAC dimmable.
ユーザー ガイド: PDF
計算ツール

TPS92210_DESIGN_CALC TPS92210 Design Calculator

The TPS92210 Design Calculator is a design tool for an AC/DC single LED string driver with a PFC and TRIAC dimming option. When using this tool the minimum output voltage should be greater than 5.2V and maximum output power should be less than 30W.
サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
力率改善 (PFC) コントローラ
TPS92210 カスコード接続 MOSFET 付き、LED ライティング用コンスタント・オンタイム・ドライバ・コントローラ
リファレンス・デザイン

PMP6023 — 25W、100~264VAC 入力、0~10V 調光 LED ドライバ、ダウンライト、反射板およびモジュール用

これは、0 ~ 10V による調光が可能で絶縁型の 25W を供給する LED ドライバのデザインであり、>0.9 の力率(PF)を達成し、商用のライティングの PF や、全高調波歪(THD)に関する要件を満たすか、それらを上回ります。  高輝度の LED エミッタを使用する、LED 照明器具への内蔵、またはバラスト(安定化機能)に適しています。  このデザインは、45V ~ 55V の入力を受け入れ、500mA(最大)の LED 出力電流と LED スタック電圧を供給する目的で最適化されています。
試験報告書: PDF
回路図: PDF
パッケージ ピン数 ダウンロード
SOIC (D) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ