ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ 力率改善 (PFC) コントローラ

UCC28019

アクティブ

65kHz、連続導通モード (CCM) PFC コントローラ

この製品には新バージョンがあります。

open-in-new 代替品と比較
比較対象デバイスと類似の機能
UCC28019A アクティブ 拡張済みのスタートアップと過渡応答、65kHz CCM PFC コントローラ This product has improved power efficiency and feature set.

製品詳細

Topology Boost Control mode CCM Switching frequency (max) (kHz) 65 UVLO thresholds on/off (V) 10.5/9.5 Vin (max) (V) 22 Features < 150 W applications, > 750 W applications, Average current mode, Continuous Control Mode, Overvoltage protection Rating Catalog Operating temperature range (°C) -40 to 125 Duty cycle (max) (%) 99.3
Topology Boost Control mode CCM Switching frequency (max) (kHz) 65 UVLO thresholds on/off (V) 10.5/9.5 Vin (max) (V) 22 Features < 150 W applications, > 750 W applications, Average current mode, Continuous Control Mode, Overvoltage protection Rating Catalog Operating temperature range (°C) -40 to 125 Duty cycle (max) (%) 99.3
SOIC (D) 8 29.4 mm² 4.9 x 6
  • 8-pin Solution Without Sensing Line Voltage Reduces External Components
  • Wide-Range Universal AC Input Voltage
  • Fixed 65-kHz Operating Frequency
  • Maximum Duty Cycle of 97%
  • Output Over/Under-Voltage Protection
  • Input Brown-Out Protection
  • Cycle-by-Cycle Peak Current Limiting
  • Open Loop Detection
  • Low-Power User Controlled Standby Mode
  • APPLICATIONS
    • CCM Boost Power Factor Correction Power Converters in the 100 W to >2 kW Range
    • Server and Desktop Power Supplies
    • Telecom Rectifiers
    • Industrial Electronics
    • Home Electronics

  • 8-pin Solution Without Sensing Line Voltage Reduces External Components
  • Wide-Range Universal AC Input Voltage
  • Fixed 65-kHz Operating Frequency
  • Maximum Duty Cycle of 97%
  • Output Over/Under-Voltage Protection
  • Input Brown-Out Protection
  • Cycle-by-Cycle Peak Current Limiting
  • Open Loop Detection
  • Low-Power User Controlled Standby Mode
  • APPLICATIONS
    • CCM Boost Power Factor Correction Power Converters in the 100 W to >2 kW Range
    • Server and Desktop Power Supplies
    • Telecom Rectifiers
    • Industrial Electronics
    • Home Electronics

The UCC28019 8-pin active Power Factor Correction (PFC) controller uses the boost topology operating in Continuous Conduction Mode (CCM). The controller is suitable for systems in the 100 W to >2 kW range over a wide-range universal ac line input. Startup current during under-voltage lockout is less than 200 µA. The user can control low power standby mode by pulling the VSENSE pin below 0.77 V.

Low-distortion wave-shaping of the input current using average current mode control is achieved without input line sensing, reducing the Bill of Materials component count. Simple external networks allow for flexible compensation of the current and voltage control loops. The switching frequency is internally fixed and trimmed to better than 5% accuracy at 25°C. Fast 1.5-A gate peak current drives the external switch.

Numerous system-level protection features include peak current limit, soft over-current detection, open-loop detection, input brown-out detection, output over-voltage protection/under-voltage detection, a no-power discharge path on VCOMP, and overload protection on ICOMP. Soft-Start limits boost current during start-up. A trimmed internal reference provides accurate protection thresholds and regulation set-point. An internal clamp limits the gate drive voltage to 12.5 V.

The UCC28019 8-pin active Power Factor Correction (PFC) controller uses the boost topology operating in Continuous Conduction Mode (CCM). The controller is suitable for systems in the 100 W to >2 kW range over a wide-range universal ac line input. Startup current during under-voltage lockout is less than 200 µA. The user can control low power standby mode by pulling the VSENSE pin below 0.77 V.

Low-distortion wave-shaping of the input current using average current mode control is achieved without input line sensing, reducing the Bill of Materials component count. Simple external networks allow for flexible compensation of the current and voltage control loops. The switching frequency is internally fixed and trimmed to better than 5% accuracy at 25°C. Fast 1.5-A gate peak current drives the external switch.

Numerous system-level protection features include peak current limit, soft over-current detection, open-loop detection, input brown-out detection, output over-voltage protection/under-voltage detection, a no-power discharge path on VCOMP, and overload protection on ICOMP. Soft-Start limits boost current during start-up. A trimmed internal reference provides accurate protection thresholds and regulation set-point. An internal clamp limits the gate drive voltage to 12.5 V.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと類似の機能
UCC28180 アクティブ 拡張済みのスタートアップと過渡応答、18kHz ~ 250kHz CCM PFC コントローラ This product is a 8-pin continuous conduction mode (CCM) PFC controller, and has programmable frequency capability.

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート 8-Pin Continuous Conduction Mode (CCM) PFC Controller データシート (Rev. B) 2007年 12月 11日
アプリケーション・ノート Optimizing the UCC28019A to Avoid Audible Noise 2013年 6月 20日
ユーザー・ガイド UCC28019 350W Evaluation Module 2007年 3月 1日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・モデル

UCC28019 PSpice Average Model

SLUM056.ZIP (112 KB) - PSpice Model
シミュレーション・モデル

UCC28019 PSpice Transient Model

SLUM062.ZIP (44 KB) - PSpice Model
シミュレーション・モデル

UCC28019 TINA-TI Transient Reference Design

SLUM526.TSC (471 KB) - TINA-TI Reference Design
シミュレーション・モデル

UCC28019 TINA-TI Transient Spice Model

SLUM525.ZIP (11 KB) - TINA-TI Spice Model
計算ツール

UCC28019-DESIGN-CALC UCC28019 Design Calculator

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
力率改善 (PFC) コントローラ
UCC28019 65kHz、連続導通モード (CCM) PFC コントローラ
パッケージ ピン数 ダウンロード
SOIC (D) 8 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ