ホーム パワー・マネージメント AC/DC と絶縁型 DC/DC の各スイッチング・レギュレータ フライバック・コントローラ

UCC28722

アクティブ

バイポーラ・パワー・デバイス向け、1 次側レギュレーション搭載、低コスト CVCC フライバック・コントローラ

製品詳細

Control mode Primary-side regulation UVLO thresholds on/off (V) 21/7.7 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 80 Features CC/CV output regulation, Cable compensation, DCM, Low power, Overcurrent protection, Primary-side regulated, Soft start Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
Control mode Primary-side regulation UVLO thresholds on/off (V) 21/7.7 Duty cycle (max) (%) 99 Switching frequency (max) (kHz) 80 Features CC/CV output regulation, Cable compensation, DCM, Low power, Overcurrent protection, Primary-side regulated, Soft start Operating temperature range (°C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • < 50-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-
    Coupler
  • Dynamic BJT Drive
  • ± 5% Voltage and Current Regulation Across Line
    and Load
  • 80-kHz Maximum Switching Frequency Enables
    High-Power Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for
    Highest Overall Efficiency
  • Wide VDD Range Allows Small Bias Capacitor
  • Output Overvoltage, Low-Line, and Overcurrent
    Protection Functions
  • Programmable Cable Compensation
  • SOT23-6 Package
  • < 50-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-
    Coupler
  • Dynamic BJT Drive
  • ± 5% Voltage and Current Regulation Across Line
    and Load
  • 80-kHz Maximum Switching Frequency Enables
    High-Power Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for
    Highest Overall Efficiency
  • Wide VDD Range Allows Small Bias Capacitor
  • Output Overvoltage, Low-Line, and Overcurrent
    Protection Functions
  • Programmable Cable Compensation
  • SOT23-6 Package

The UCC28722 flyback power supply controller provides isolated-output constant-voltage (CV) and constant-current (CC) output regulation without the use of an optical coupler. The device processes information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

Dynamically-controlled operating states and a tailored modulation profile support high-efficiency operation at all load levels without sacrificing output transient response.

Control algorithms in the UCC28722 device allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a bipolar transistor power switch, enabling lower-cost converter design. Discontinuous conduction mode (DCM) with valley switching reduces switching losses, while modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. Output overvoltage and overcurrent as well as input undervoltage protection features help keep primary and secondary component stresses in check. The UCC28722 also allows compensation for voltage drop in the cable to be programmed with an external resistor.

The UCC28722 flyback power supply controller provides isolated-output constant-voltage (CV) and constant-current (CC) output regulation without the use of an optical coupler. The device processes information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

Dynamically-controlled operating states and a tailored modulation profile support high-efficiency operation at all load levels without sacrificing output transient response.

Control algorithms in the UCC28722 device allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a bipolar transistor power switch, enabling lower-cost converter design. Discontinuous conduction mode (DCM) with valley switching reduces switching losses, while modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. Output overvoltage and overcurrent as well as input undervoltage protection features help keep primary and secondary component stresses in check. The UCC28722 also allows compensation for voltage drop in the cable to be programmed with an external resistor.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
18 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート UCC28722 Constant-Voltage, Constant-Current Controller With Primary-Side Regulation, BJT Drive データシート (Rev. B) PDF | HTML 2015年 10月 30日
アプリケーション・ノート Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 2021年 8月 31日
アプリケーション・ノート Common-Mode-Chokeless Bias Supply Reference Design Example 2020年 1月 2日
アプリケーション・ノート Minimize Standby Consumption for UCC287XX Family 2019年 8月 1日
アプリケーション・ノート Selecting Electrolitic Bus Capacitor for Universal Input 2018年 7月 17日
アプリケーション・ノート Maximum Output Power and Thermal Considerations for UCC28720 and UCC28722 2017年 12月 6日
アプリケーション・ノート AC-DC Non-Isolated SMPS for Single-Phase Smart Meters Based on UCC28722 (Rev. A) 2017年 11月 2日
技術記事 Making smart meter eFuses robust and reliable PDF | HTML 2017年 6月 28日
技術記事 Powering the IoT PDF | HTML 2017年 1月 26日
アプリケーション・ノート Troubleshooting TI PSR controllers 2016年 10月 3日
技術記事 Solving the biggest challenges when designing smart meter power supplies PDF | HTML 2016年 9月 6日
アプリケーション・ノート UCC28722, Bias Supply Design Considerations for Intelligent eMeter Applications 2016年 8月 5日
技術記事 Slim down your flyback; lose that excess snubber PDF | HTML 2016年 2月 15日
アプリケーション・ノート Versatile Buck-Boost driver based on UCC28722 for 5W-9W LED Bulb 2015年 12月 8日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters 2015年 10月 2日
ホワイト・ペーパー Control Challenges for Low Power AC/DC Converters (PPT) 2015年 10月 2日
技術記事 Designing multiple output converters with primary side sensing PDF | HTML 2015年 8月 4日
アプリケーション・ノート 5-W USB Flyback Design Example Using the UCC28722 2014年 1月 8日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

UCC28720EVM-212 — UCC28720EVM-212 5W 評価基板、USB オフライン・アダプタ用

The UCC28720EVM-212 is a 5W evaluation module for evaluating an off line adapter for USB applications. It is intended for evaluation purposes and is not intended to be an end product. The UCC28720EVM-212 converters 100V to 240V RMS input voltage down to 5V DC, with a 1A current limit for USB (...)
ユーザー ガイド: PDF
シミュレーション・モデル

UCC28722 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM466A.ZIP (64 KB) - PSpice Model
計算ツール

SLUC528 UCC28722 MathCad Design Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
フライバック・コントローラ
UCC28720 1 次側レギュレーション機能搭載、バイポーラ・パワー・デバイス向け、定電圧、定電流コントローラ UCC28722 バイポーラ・パワー・デバイス向け、1 次側レギュレーション搭載、低コスト CVCC フライバック・コントローラ
計算ツール

SLUC529 UCC28722 Excel Design Tool

サポート対象の製品とハードウェア

サポート対象の製品とハードウェア

製品
フライバック・コントローラ
UCC28720 1 次側レギュレーション機能搭載、バイポーラ・パワー・デバイス向け、定電圧、定電流コントローラ UCC28722 バイポーラ・パワー・デバイス向け、1 次側レギュレーション搭載、低コスト CVCC フライバック・コントローラ

多くの TI リファレンス デザインには、UCC28722 があります。

TI のリファレンス デザイン セレクション ツールを使用すると、開発中のアプリケーションやパラメータとの適合度が最も高いデザインの確認と特定を進めることができます。

パッケージ ピン数 ダウンロード
SOT-23 (DBV) 6 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ