Home
Design & development
Xilinx

DLPR410-IBIS

DLPR410 IBIS Model

Downloads

DLPR410-IBIS

From: Xilinx
Downloads

Overview

IBIS file for the DLPR410 PROM device which supports the DLPC410, DLP650LNIR, DLP7000, DLP7000UV, DLP9500 and DLP9500UV.
Download View video with transcript Video

Downloads

Simulation tool

DLPR410-IBIS — IBIS file for DLPR410 PROM

Supported products & hardware
Visit partner site

Supported products & hardware

Near-UV products (400 to 420 nm)
DLP7000 — DLP® 0.7 XGA 2xLVDS Type-A DMD
Near-UV products (400 to 420 nm)
DLP9500 — DLP® 0.95 1080p 2xLVDS Type-A DMD DLPC410 — Digital controller for DLP650LNIR, DLP7000/7000UV & DLP9500/DLP9500UV digital micromirror dev
Near-infrared products (> 700 nm)
DLP650LNIR — DLP 0.65 NIR WXGA S450 DMD
UV products (< 400 nm)
DLP7000UV — DLP® 0.7 XGA 2xLVDS UV Type-A DMD DLP9500UV — DLP® 0.95 1080p 2xLVDS UV Type-A DMD
Evaluation board
DLPLCRC410EVM — DLPLCRC410 Evaluation Module

Support & training

Third-party support
TI does not offer ongoing direct design support for this software. For support while working through your design, contact Xilinx.

Videos
Disclaimer

Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.