LM3658SD-AEV

2入力、USB/AC リチウム・ケミストリ・チャージャ IC、ポータブル・アプリケーション用

LM3658SD-AEV

購入

概要

The LM3658 is a single chip charger IC designed for hand-held applications. The LM3658 can safely charge and maintain a single cell Li-Ion/Polymer battery operating from an AC wall adapter or the USB power source. Input power source selection of USB/AC is automatic. With both power sources present, the AC power source has priority. Charge current is programmed through an external resistor when operating from an AC wall adapter allowing charge currents from 50mA to 1000mA. When the battery is charged using USB power, charge currents of 100mA or 500mA are pin selectable. The termination voltage is controlled to within plus or minus .35% of 4.2V. The LM3658 requires few external components and integrates internal Power FETs, reverse current protection and current sensing. The internal power FETs are thermally regulated to obtain the most efficient charging rate for a given ambient temperature.

The LM3658 operatesin five phases: pre-qualification mode, constant-current mode, constant-voltage mode, topoff mode and maintenance mode. Additionally the LM3658-B charger IC operates as a linear Regulator or in "LDO mode" when the AC wall adapter is connected and no battery is present. Optimal battery management is obtained through the integration of thermal protection, battery temperature measurement and a multi-mode safety timer. The LM3658 provides two open-drain outputs for LED status indication or connection to a GPIO.

The LM3658 evaluation kit supports complete functional evaluation of the battery charger IC. All user accessible functions of the circuit can be controlled through jumpers. The evaluation kits are available in three options: LM3658SDEV, LM3658SDAEV, and LM3658SDBEV. For details of the various options, please refer to the ordering information table located in either the data sheet or Application Note 1517.

特長
  • Integrated power FETs with thermal regulation
  • Charges from either an AC wall adapter or USB power source with automatic source selection
  • 50mA to 1000 mA charge currents using AC wall adapter
  • Pin-selectable USB charge currents of 100 mA or 500 mA
  • LDO mode with 1A of source current is automatically invoked when the battery is absent and the AC wall
    adapter is connected
  • Continuous battery temperature monitoring
  • Built-in multiple safety timers
  • Charge status indication
  • Continuous over-current and temperature protection
  • Near-depleted battery pre-conditioning
  • Sleep mode with ultra low quiescent current
  • On-board Kelvin-sensing achieves plus or minus .35% termination accuracy.
  • Maintenance mode with automatic recharge
  • Thermally enhanced 3 mm x 3 mm LLP package

Applications

  • Smartphones
  • Digital still cameras
  • PDAs
  • Hard drive and flash-based MP3 players
  • USB-powered devices

 

バッテリ・チャージャ IC
LM3658 ポータブル・アプリケーション向け、デュアル電力源、USB/AC リチウム・ケミストリ・チャージャ IC
ダウンロード 字幕付きのビデオを表示 ビデオ

購入と開発の開始

評価ボード

LM3658SD-AEV/NOPB — Dual Source USB AC Li Chemistry Charger IC for Portable Applications

TI.com で取り扱いなし
TI の評価品に関する標準契約約款が適用されます。

技術資料

star
= TI が選択した主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
すべて表示 2
種類 タイトル 英語版のダウンロード 日付
* ユーザー・ガイド AN-1517 LM3658 Evaluation Kit (Rev. E) 2013年 4月 30日
証明書 LM3658SD-AEV/NOPB EU Declaration of Conformity (DoC) 2019年 1月 2日

サポートとトレーニング

TI E2E™ Forums (英語) では、TI のエンジニアからの技術サポートが活用できます

すべてのフォーラムトピックを英語で表示

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください

TI 製品の品質、パッケージ、ご注文に関する質問は、TI サポートのページをご覧ください。

ビデオ