PMP10653

広 VIN フロントエンド付非圧縮デジタル・ビデオの自動車用カメラ・モジュール・リファレンス・デザイン

概要

PMP10653.1 is an Optimized Automotive Camera Module Design for Uncompressed Digital Video over Coax cable. The design is broadly divided into four Blocks.

  1. Power Block: This design support Wide Vin, i.e., 4.5V-36V. LM53601 is used for first stage DC/DC conversion, which can deliver 1A at 3.3V output. This device is synchronous, fully integrated and 2.1MHz switching which results in highly integrated design. Two ultra-low noise LDOs (LP5907) are used to power noise susceptible image sensor as well as serializes.   
  2. Serializers: 12-bit Serializer DS90UB913A is used which offers a FPD-Link III interface with a high-speed forward channel and a bidirectional control channel for data transmission over a single coaxial cable or differential pair.
  3. Digital image Sensor: Omnivision’s OV10640 image sensor is used which utilizes backside illumination technology, enabling industry leading sensitivity.
  4. Power Supply filter:  One of the most critical portions of a design which uses Power over Coax is the filter circuitry. The goal is twofold: 1) deliver a clean DC supply to the input of the switching regulators; and 2) protect the FPDLink communication channels from noise coupled backwards from the rest of the system.

特長
  • Integrated Front end Supports Wide Vin
  • Spread Sectrum -Best in Class EMIperformance
  • High PSRR LDO  for enabling Superior image quality
  • 12-bit Serializer DS90UB913A and Image Sensor OVT10640 for Higher resolution Video
  • Filter design to avoid noise coupling in the system
出力電圧オプション PMP10653.1 PMP10653.2 PMP10653.3
Vin (Min) (V) 4.8 3.3 3.3
Vin (Max) (V) 30 3.3 3.3
Vout (Nom) (V) 3.3 1.8 1.5
Iout (Max) (A) 1 .25 .25
Output Power (W) 3.3 .45 .375
Isolated/Non-Isolated Non-Isolated Non-Isolated Non-Isolated
Input Type DC DC DC
Topology Buck- Synchronous Buck- Synchronous Buck- Synchronous
??image.gallery.download_ja_JP?? 字幕付きのビデオを表示 ビデオ

組み立てられたボードは、テストと性能検証のみの目的で開発されたものであり、販売していません。

設計ファイルと製品

設計ファイル

すぐに使用できるシステム・ファイルをダウンロードすると、設計プロセスを迅速化できます。

TIDUB58.PDF (3220 K)

効率グラフや試験の前提条件などを含める、このリファレンス・デザインに関する試験結果

TIDRIX5.PDF (325 K)

設計レイアウトとコンポーネントを示した詳細な回路図

TIDRIX6.PDF (780 K)

設計レイアウトとコンポーネントを示した詳細な回路図

TIDRIX7.PDF (23 K)

設計に使用したコンポーネント、参照指定子、メーカー名や型番などを記入した詳細なリスト

TIDCBG2.ZIP (1083 K)

PCB 設計の基板層に関する情報を記載した設計ファイル

製品

設計や代替製品候補に TI 製品を含めます。

降圧コンバータ (スイッチ内蔵)

LM53601-Q1車載対応、3.5V ~ 36V、2.1MHz、1A、同期整流降圧コンバータ

データシート: PDF | HTML
FPD-Link SerDes

DS90UB913A-Q125 ~ 100MHz、10 ビットと 12 ビット、FPD-Link III シリアライザ

データシート: PDF | HTML
リニア・レギュレータと低ドロップアウト (LDO) レギュレータ

LP5907低静止電流 (IQ)、イネーブル搭載、250mA、低ノイズ、高 PSRR、超低ドロップアウト電圧レギュレータ

データシート: PDF | HTML

技術資料

star
= TI が選択した主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
すべて表示 1
種類 タイトル 英語版のダウンロード 日付
* 試験報告書 PMP10653 Test Results 2015年 11月 30日

サポートとトレーニング

TI E2E™ Forums (英語) では、TI のエンジニアからの技術サポートが活用できます

すべてのフォーラムトピックを英語で表示

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください

TI 製品の品質、パッケージ、ご注文に関する質問は、TI サポートのページをご覧ください。

ビデオ