PMP10749

車載インフォテインメント・システム向け 100W システムレベル電源のリファレンス・デザイン

概要

PMP10749 is a 100-W system-level SMPS design for a higher-power automotive infotainment system. The design has protections, such as load dump through TVS (ISO pulse testing), as well as reverse voltage (innovative smart diode with very low Iq) protection. Furthermore, all the controllers (boost and dual bucks) are in SYNC for EMI-optimized design.


The design is divided into four major blocks:

  1. Protection: Reverse battery protection through efficient smart diode and automotive transient protections through TVS.
  2. EMI filter: 14-A common modes choke at front end with a differential filter for conducted EMI suppression.
  3. Preboost: Highly efficient synchronous preboost design for 100-W application. The output is maintained at 10 V and when Vin > Vout , the output follows the input and true bypass operation is achieved.
  4. Dual buck controller: 2.2-MHz switching for AM band avoidance, as well as small size solution. Supports two outputs: 5 V at 10 A, as well as 3.3 V at 10 A. The syncout of controller is used to sync boost at F/10 frequency.

 

特長
  • 2.2-MHz switching for SYNC buck controller – avoid AM band + smaller size
  • Wide Vin support for automotive application
  • Cycle-by-cycle current limit and optional hiccup-mode overload protection
  • Low-cost and high-efficiency solution for 100-W application
  • Smart diode for highly efficient reverse battery protection
出力電圧オプション PMP10749.1 PMP10749.2 PMP10749.3
Vin (Min) (V) 4 10 10
Vin (Max) (V) 32 32 32
Vout (Nom) (V) 10 3.3 3.3
Iout (Max) (A) 10 10 10
Output Power (W) 100 33 33
Isolated/Non-Isolated Non-Isolated Non-Isolated Non-Isolated
Input Type DC DC DC
Topology Boost- Synchronous Buck- Synchronous Buck- Synchronous
??image.gallery.download_ja_JP?? 字幕付きのビデオを表示 ビデオ

組み立てられたボードは、テストと性能検証のみの目的で開発されたものであり、販売していません。

設計ファイルと製品

設計ファイル

すぐに使用できるシステム・ファイルをダウンロードすると、設計プロセスを迅速化できます。

TIDUBN1.PDF (6772 K)

効率グラフや試験の前提条件などを含める、このリファレンス・デザインに関する試験結果

TIDRKU4.PDF (495 K)

設計レイアウトとコンポーネントを示した詳細な回路図

TIDRKU5.PDF (611 K)

設計レイアウトとコンポーネントを示した詳細な回路図

TIDRKU6.PDF (25 K)

設計に使用したコンポーネント、参照指定子、メーカー名や型番などを記入した詳細なリスト

TIDRKU7.ZIP (1778 K)

IC コンポーネントの 3D モデルまたは 2D 図面に使用するファイル

TIDCBX9.ZIP (454 K)

PCB 設計の基板層に関する情報を記載した設計ファイル

製品

設計や代替製品候補に TI 製品を含めます。

AC/DC & DC/DC controllers (external FET)

LM5122-Q1車載対応、マルチフェーズ機能搭載、3V ~ 65V の広い入力電圧範囲 (VIN)、電流モード、同期整流昇圧コントローラ

データシート: PDF | HTML
AC/DC & DC/DC controllers (external FET)

LM5140-Q1ワイド入力電圧デュアル 2.2MHz 低静止電流(Iq)同期整流降圧コントローラ

データシート: PDF | HTML
カウンタ

CD74HC4017高速 CMOS ロジック 10 進カウンタ/分周、10 デコード出力

データシート: PDF
理想ダイオード / OR コントローラ

LM74610-Q1車載対応、0.48V ~ 42V、ゼロ静止電流 (IQ)、理想ダイオード・コントローラ

データシート: PDF | HTML

技術資料

star
= TI が選択した主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
すべて表示 1
種類 タイトル 英語版のダウンロード 日付
* 試験報告書 PMP10749 Test Results 2016年 3月 21日

サポートとトレーニング

TI E2E™ Forums (英語) では、TI のエンジニアからの技術サポートが活用できます

すべてのフォーラムトピックを英語で表示

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください

TI 製品の品質、パッケージ、ご注文に関する質問は、TI サポートのページをご覧ください。

ビデオ