PMP10937
AC/DC 補助電源、リファレンス・デザイン、UCC28700 使用
PMP10937
概要
The PMP10937 reference design uses Buck converter to convert universal AC input voltage to a 18V/0.3A DC output with UCC28700 controller. Circuit simplicity is achieved with quasi-resonant valley-switching operation and the utilization of Buck topology. With all components placed within the dimension of 1.05" x 2.1", over 80% efficiency is achieved at full load and no load power consumption of this board is about 150mW.
特長
- Universal AC input with 18V/0.3A output
- About 150mW no load power consumption
- Over 80% efficiency is achieved at full load
- Less than 40degC temperature rise
- 1.05" x 2.1" X-Y dimension
- Test report is available
出力電圧オプション | PMP10937.1 |
---|---|
Vin (Min) (V) | 85 |
Vin (Max) (V) | 265 |
Vout (Nom) (V) | 18 |
Iout (Max) (A) | .3 |
Output Power (W) | 5.4 |
Isolated/Non-Isolated | Non-Isolated |
Input Type | AC |
Topology | Buck- Non Sync |
産業用
組み立てられたボードは、テストと性能検証のみの目的で開発されたものであり、販売していません。
設計ファイルと製品
設計ファイル
すぐに使用できるシステム・ファイルをダウンロードすると、設計プロセスを迅速化できます。
TIDRJZ6.PDF (118 K)
設計に使用したコンポーネント、参照指定子、メーカー名や型番などを記入した詳細なリスト
技術資料
= TI が選択した主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
すべて表示 1
種類 | タイトル | 英語版のダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | 試験報告書 | PMP10937 Test Results | 2015年 12月 21日 |