TPS92010EVM-592
TPS92010 評価モジュール、110VAC TRIAC 調光器対応、電球置き換え用
TPS92010EVM-592
概要
This EVM uses the TPS92010 high efficiency offline LED lighting driver controller. The power topology is a quasi resonant mode flyback. This makes for a cost competitive solution. This TPS92010 EVM implements a constant current, high efficiency, low ripple AC-DC LED lighting driver. The high efficiency is maintained even during deep dimming. Current sensing is done directly via a resistor and op-amp. This in turn drives an opto-coupler which sets the PWM pulses via the TPS92010 to control the output current at a constant level. The design also incorporates a circuit to ensure compatibility with a large number of commonly available TRIAC based dimmers. This circuit monitors the line voltage for TRIAC operation. When the TRIAC is operating the line voltage is chopped. This information is used by the circuit to reduce the constant output current level thus dimming the LED’s. It also applies a current path at the input to ensure the TRIAC triggers correctly and maintains triggered condition
特長
- TRIAC compatible dimming
- Low cost line powered LED driver solution
- Includes 5 HB-LED’s as a sample load
- Allows easy use of user own LED load
- Test points for LED voltage and current
- Accurate current sensing to maintain constant current to LED’s
- Modifiable output current from 0.2A to 0.7A, 0.325A is default
AC/DC & DC/DC controllers (external FET)
購入と開発の開始
TPS92010EVM-592 — TPS92010 評価モジュール、110VAC TRIAC 調光器対応、電球置き換え用
技術資料
種類 | タイトル | 英語版のダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | EVM ユーザー ガイド (英語) | Using the TPS92010EVM-592 (Rev. C) | 2010年 5月 28日 | |||
証明書 | TPS92010EVM-592 EU Declaration of Conformity (DoC) | 2019年 1月 2日 | ||||
データシート | High Efficiency Offline LED Lighting Driver Controller データシート | 2009年 12月 3日 |