The AMC7834 device is a highly-integrated, low-power, analog monitoring and control solution for power-amplifier (PA) biasing capable of temperature, current and voltage supervision.
The device integrates a multi-channel, 12-bit analog-to-digital converter (ADC); eight, 12-bit digital-to-analog converters (DAC); four high-side current-sense amplifiers that can be optionally set to operate as part of four independent closed-loop drain-current controllers; an accurate on-chip temperature sensor and two remote temperature-sensor diode drivers; four configurable general-purpose I/O ports (GPIOs); and an accurate internal reference. The high level of integration significantly reduces component count and simplifies PA-biasing system designs.
The function integration and wide operating-temperature range of the device make it suitable as an all-in-one, low-cost, bias control-circuit for PAs found in multi-channel RF communication systems. The flexible DAC output ranges and wide common mode voltage current sensors allow the device to be used as a biasing solution for a large variety of transistor technologies such as LDMOS, GaAs, and GaN. The AMC7834 feature set is similarly beneficial in general-purpose monitor and control systems.
For applications that require a different channel-count, additional features, or converter resolutions, Texas Instruments offers a complete family of analog monitor and control (AMC) products. For more information, go to www.ti.com/amc.
|Part number||オーダー・オプション||ADC input channels (#)||ADC resolution (bits)||DAC channels||DAC: resolution (Bits)||Temperature sensing||GPIOs||Interface||Special function||Operating temperature range (C)||Package Group||Package size: mm2:W x L (PKG)||ADC: sampling rate (KSPS)||ADC: analog input range (Min) (V)||ADC: analog input range (Max) (V)||DAC: settling time (uS)||DAC: output full scale (Min) (V)||DAC: output full scale (Max) (V)|
|4||SPI||4 High Common-Mode Current Sensors||-40 to 125||QFN | 56||56QFN: 64 mm2: 8 x 8 (QFN | 56)||62.5||0||2.5||10||-5||7.5|
|Temp Sensor||-40 to 125||
HTQFP | 64
VQFN | 64
64HTQFP: 144 mm2: 12 x 12 (HTQFP | 64)
64VQFN: 81 mm2: 9 x 9 (VQFN | 64)
|6||SPI||Current Source up to 10 mA||-40 to 85||WQFN | 40||40WQFN: 36 mm2: 6 x 6 (WQFN | 40)||200||0||5||2||0||5|