BQ27621-G1 システム側 Impedance Track バッテリー残量計、ダイナミック電圧相関機能付き | TIJ.co.jp

BQ27621-G1
この製品はすでに市場にリリースされており、ご購入できます。 一部の製品は、より新しい代替品を使用できる可能性があります。
システム側 Impedance Track バッテリー残量計、ダイナミック電圧相関機能付き

システム側 Impedance Track バッテリー残量計、ダイナミック電圧相関機能付き - BQ27621-G1
データシート
 

概要

The Texas Instruments bq27621-G1 is a minimally configured microcontroller peripheral that provides system-side fuel gauging for single-cell Li-Ion batteries. The device requires very little user configuration and system microcontroller firmware development.

The bq27621-G1 uses the Dynamic Voltage Correlation algorithm for fuel gauging. This process eliminates the need for a sense resistor when calculating remaining battery capacity (mAh), state-of-charge (%), battery voltage (mV), and temperature (°C).

Battery fuel gauging with the bq27621-G1 requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery circuit. The tiny 9-pin, 1.62 mm × 1.58 mm, 0.5 mm pitch YZF package is ideal for space-constrained applications.

特長

  • Single-Cell Li-Ion Battery Fuel Gauge
    • Resides on System Board
    • Supports Embedded or Removable Batteries
    • Powered Directly from Battery with Integrated
      LDO
  • Easy To Configure Fuel Gauging Based on the
    Dynamic Voltage Correlation Algorithm
    • Reports Remaining Capacity and State of
      Charge (SOC) with Smoothing Filter
    • Automatically Adjusts for Self-Discharge,
      Temperature, and Rate Changes
  • Microcontroller Peripheral Supports:
    • 400-kHz I2C Serial Interface
    • Configurable SOC Interrupt or
      Battery Low Digital Output Warning
    • Internal Temperature Sensor or
      Host Reported Temperature
  • Support 4.2-V, 4.3-V, and 4.35-V Chemistries
  • 9-pin 1.62 × 1.58 mm, 0.5 mm pitch YZF package

機能一覧

他の製品と比較 バッテリ残量計 メール Excelへダウンロード
Part number オーダー・オプション Number of series cells Cell chemistry Battery capacity (Max) (mAh) Communication interface Battery capacity (Min) (mAh) External capacity indication Implementation Gas gauge algorithm Cell balancing Features Operating temperature range (C) Package Group Package size: mm2:W x L (PKG)
BQ27621-G1 ご注文 Single Cell     Li-Ion/Li-Polymer     32000     I2C     100     None     System     Dynamic Voltage Correlation         No Sense Resistor Required     -40 to 85     DSBGA | 9     9DSBGA: 3 mm2: 1.75 x 1.75 (DSBGA | 9)    
BQ27220 ご注文 Single Cell     Li-Ion/Li-Polymer     29000     I2C     100     None     Pack
System    
CEDV         CEDV     -40 to 85     DSBGA | 9     9DSBGA: 3 mm2: 1.75 x 1.75 (DSBGA | 9)    
BQ27426 ご注文 Single Cell     Li-Ion/Li-Polymer     14000     I2C     100     None     System     Impedance Track             -40 to 85     DSBGA | 9     9DSBGA: 3 mm2: 1.75 x 1.75 (DSBGA | 9)    
BQ27520-G4 ご注文 Single Cell     Li-Ion/Li-Polymer     32000     I2C     100     None     System     Impedance Track             -40 to 85     DSBGA | 15     15DSBGA: 5 mm2: 2.75 x 1.75 (DSBGA | 15)    
BQ35100 ご注文 Single Cell     Primary Lithium     32000     I2C     100     None     Pack
System    
Primary         Accumulated Coulomb Count     -40 to 85     TSSOP | 14     14TSSOP: 32 mm2: 6.4 x 5 (TSSOP | 14)