TPA2036D1

アクティブ

可変ゲインおよび短絡保護機能搭載、2.5W、モノラル、アナログ入力 Class-D オーディオ・アンプ

製品詳細

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Load (min) (Ω) 4 Output power (W) 2.5 SNR (dB) 97 THD + N at 1 kHz (%) 0.18 Iq (typ) (mA) 3.4 Control interface GPIO Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 75 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Load (min) (Ω) 4 Output power (W) 2.5 SNR (dB) 97 THD + N at 1 kHz (%) 0.18 Iq (typ) (mA) 3.4 Control interface GPIO Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 75 Operating temperature range (°C) -40 to 85
DSBGA (YZF) 9 3.0625 mm² 1.75 x 1.75
  • Pin-to-pin compatibility with TPA2010D1
  • Short Circuit Auto-recovery
  • Maximum Battery Life and Minimum Heat
    • Efficiency With an 8- Speaker:
      • 88% at 400 mW
      • 80% at 100 mW
    • 2.8-mA Quiescent Current
    • 0.5-µA Shutdown Current
  • Only Three External Components
    • Optimized PWM Output Stage Eliminates LC Output Filter
    • High PSRR (–75 dB) and Wide Supply Voltage (2.5 V to 5.5 V)
    • Fully Differential Design Reduces RF Rectification and Eliminates Bypass Capacitor
    • Improved CMRR Eliminates Two Input Coupling Capacitors
  • 1,45mm × 1,45 mm 9-Ball WCSP
    • NanoFree™ Lead-Free (YZF)
  • APPLICATIONS
    • Wireless or Cellular Handsets and PDAs
    • Personal Navigation Devices
    • General Portable Audio Devices
    • Linear Vibrator Drivers
  • See Also
    • TPA2031D1, TPA2032D1, TPA2033D1, TPA2034D1, TPA2035D1

NanoFree is a trademark of Texas Instruments.

  • Pin-to-pin compatibility with TPA2010D1
  • Short Circuit Auto-recovery
  • Maximum Battery Life and Minimum Heat
    • Efficiency With an 8- Speaker:
      • 88% at 400 mW
      • 80% at 100 mW
    • 2.8-mA Quiescent Current
    • 0.5-µA Shutdown Current
  • Only Three External Components
    • Optimized PWM Output Stage Eliminates LC Output Filter
    • High PSRR (–75 dB) and Wide Supply Voltage (2.5 V to 5.5 V)
    • Fully Differential Design Reduces RF Rectification and Eliminates Bypass Capacitor
    • Improved CMRR Eliminates Two Input Coupling Capacitors
  • 1,45mm × 1,45 mm 9-Ball WCSP
    • NanoFree™ Lead-Free (YZF)
  • APPLICATIONS
    • Wireless or Cellular Handsets and PDAs
    • Personal Navigation Devices
    • General Portable Audio Devices
    • Linear Vibrator Drivers
  • See Also
    • TPA2031D1, TPA2032D1, TPA2033D1, TPA2034D1, TPA2035D1

NanoFree is a trademark of Texas Instruments.

The TPA2036D1 is a 2.5-W high efficiency filter-free class-D audio power amplifier (class-D amp) in a 1,45 mm × 1,45 mm wafer chip scale package (WCSP) that requires only three external components.

Features such as 88% efficiency, –75-dB PSRR, improved RF immunity, and 8 mm2 total PCB area make TPA2036D1 ideal for cellular handsets. A fast start-up time of 1 ms with minimal pop makes TPA2036D1 ideal for portable applications.

In cellular handsets, TPA2036D1 is capable of driving the earpiece, speaker phone, and melody ringer. TPA2036D1 allows independent gain while summing signals from separate sources, and has a low 36 µVRMS noise floor, A-weighted.

The TPA2036D1 is a 2.5-W high efficiency filter-free class-D audio power amplifier (class-D amp) in a 1,45 mm × 1,45 mm wafer chip scale package (WCSP) that requires only three external components.

Features such as 88% efficiency, –75-dB PSRR, improved RF immunity, and 8 mm2 total PCB area make TPA2036D1 ideal for cellular handsets. A fast start-up time of 1 ms with minimal pop makes TPA2036D1 ideal for portable applications.

In cellular handsets, TPA2036D1 is capable of driving the earpiece, speaker phone, and melody ringer. TPA2036D1 allows independent gain while summing signals from separate sources, and has a low 36 µVRMS noise floor, A-weighted.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品
TPA2010D1 アクティブ 可変ゲインおよび短絡保護機能搭載、2.5W、アナログ入力 Class-D オーディオ・アンプ This product is an identical Class-D audio amp with short-circuit recovery
TPA2011D1 アクティブ 自動復帰の短絡保護機能搭載、1W、モノラル、アナログ入力 Class-D オーディオ・アンプ This product is a higher power (3.2-W) Class-D audio amp
比較対象デバイスと類似の機能
TPA2013D1 アクティブ 昇圧コンバータ内蔵、選択可能なゲイン機能搭載、2.7W、モノラル、アナログ入力 Class-D オーディオ・アンプ This product is a similar Class-D audio amp with integrated boost converter and selectable gain

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート 2.5-W MONO CLASS-D AUDIO AMPLIFIER WITH AUTO-RECOVERY データシート 2008年 10月 20日
ユーザー・ガイド TPA2036D1EVM - User Guide 2008年 11月 6日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPA2036D1YZFEVM — TPA2036D1 評価モジュール(EVM)

The TPA2036D1 audio power amplifier evaluation module is a complete, low-power single-channel audio power amplifier. It consists of the TI TPA2036D1 2.5-W low-voltage Class-D audio power amplifier IC in a very small NanoFree. WCSP package, along with a small number of other parts mounted on a (...)

ユーザー ガイド: PDF
シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
DSBGA (YZF) 9 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ