TPD4E6B06
- IEC 61000-4-2 Level 4
- ±15-kV Contact Discharge
- ±15-kV Air Gap Discharge
- IEC 61000-4-5 (Surge): 3 A (8/20 µs)
- IO Capacitance: 4.8 pF (Typical)
- RDYN: 0.75 Ω (Typical)
- DC Breakdown Voltage: ±6 V (Minimum)
- Ultra Low Leakage Current: 100 nA (Maximum)
- Clamping Voltage: 10 V (Maximum at IPP = 1 A)
- Industrial Temperature Range: –40°C to +125°C
- Space Saving DPW Package (0.8 mm × 0.8 mm)
The TPD4E6B06 is a four channel electrostatic discharge (ESD) protection device in an ultra small DPW package. It is the industry’s smallest 4-channel transient voltage suppressor (TVS) diode with a 0.48-mm pitch. This larger pitch helps save on printed-circuit board (PCB) manufacturing costs. The device provides IEC61000-4-2 compliance up to 15-kV contact discharge. It has an ESD clamp circuit with back-to-back diodes for bipolar-bidirectional signal support. The 4.8-pF (typical) line capacitance is suitable for a wide range of applications supporting data rates up to 700 MHz.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | TPD4E6B06 4-Channel Bidirectional Low Capacitance ESD Protection Device With 15-kV Contact and Ultra-Low Clamping Voltage データシート (Rev. C) | PDF | HTML | 2017年 2月 23日 | ||
ユーザー・ガイド | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023年 9月 19日 | |||
アプリケーション・ノート | ESD Packaging and Layout Guide (Rev. B) | PDF | HTML | 2022年 8月 18日 | |||
アプリケーション・ノート | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022年 4月 7日 | |||
ユーザー・ガイド | Generic ESD Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021年 9月 27日 | |||
ホワイト・ペーパー | Designing USB for short-to-battery tolerance in automotive environments | 2016年 2月 10日 | ||||
Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 2012年 9月 25日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
ESDEVM — 汎用 ESD の評価モジュール
<p>The electrostatic-sensitive device (ESD) evaluation module (EVM) is a development platform for most of our ESD portfolio. The board comes with all traditional ESD footprints in order to test any number of devices. Devices can be soldered onto their respect footprint and then tested.</p>
(...)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム
TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)
TINA は DesignSoft (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
X2SON (DPW) | 4 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。