CD74HCT297
- Digital Design Avoids Analog Compensation Errors
- Easily Cascadable for Higher Order Loops
- Useful Frequency Range
- K-Clock...DC to 55MHz (Typ)
- I/D-Clock...DC to 35MHz (Typ)
- Dynamically Variable Bandwidth
- Very Narrow Bandwidth Attainable
- Power-On Reset
- Output Capability
- Standard...XORPDOUT, ECPDOUT
- Bus Driver...I/DOUT
- Fanout (Over Temperature Range)
- Standard Outputs...10 LSTTL Loads
- Bus Driver Outputs...15 LSTTL Loads
- Balanced Propagation Delay and Transition Times
- Significant Power Reduction Compared to LSTTL Logic ICs
- ’HC297 Types
- Operation Voltage...2 to 6V
- High Noise Immunity NIL = 30%, NIH = 30% of VCC at 5V
- CD74HCT297 Types
- Operation Voltage...4.5 to 5.5V
- Direct LSTTL Input Logic Compatibility VIL =0.8V (Max), VIH =2V (Min)
- CMOS Input Compatibility II 1µA at VOL , VOH
Data sheet acquired from Harris Semiconductor
The HC297 and CD74HCT297 are high-speed silicon gate CMOS devices that are pin-compatible with low power Schottky TTL (LSTTL).
These devices are designed to provide a simple, cost-effective solution to high-accuracy, digital, phase-locked-loop applications. They contain all the necessary circuits, with the exception of the divide-by-N counter, to build first-order phase-locked-loops.
Both EXCLUSIVE-OR (XORPD) and edge-controlled phase detectors (ECPD) are provided for maximum flexibility. The input signals for the EXCLUSIVE-OR phase detector must have a 50% duty factor to obtain the maximum lock-range.
Proper partitioning of the loop function, with many of the building blocks external to the package, makes it easy for the designer to incorporate ripple cancellation (see Figure 2) or to cascade to higher order phase-locked-loops.
The length of the up/down K-counter is digitally programmable according to the K-counter function table. With A, B, C and D all LOW, the K-counter is disabled. With A HIGH and B, C and D LOW, the K-counter is only three stages long, which widens the bandwidth or capture range and shortens the lock time of the loop. When A, B, C and D are all programmed HIGH, the K-counter becomes seventeen stages long, which narrows the bandwidth or capture range and lengthens the lock time. Real-time control of loop bandwidth by manipulating the A to D inputs can maximize the overall performance of the digital phase-locked-loop.
The HC297 and CD74HCT297 can perform the classic first order phase-locked-loop function without using analog components. The accuracy of the digital phase-locked-loop (DPLL) is not affected by VCC and temperature variations but depends solely on accuracies of the K-clock and loop propagation delays.
お客様が関心を持ちそうな類似品
比較対象デバイスと類似の機能
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | CD54/74HC297, CD74HCT297 データシート (Rev. B) | 2003年 4月 16日 | |||
アプリケーション・ノート | Implications of Slow or Floating CMOS Inputs (Rev. E) | 2021年 7月 26日 | ||||
セレクション・ガイド | Logic Guide (Rev. AB) | 2017年 6月 12日 | ||||
アプリケーション・ノート | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 2015年 12月 2日 | ||||
セレクション・ガイド | ロジック・ガイド (Rev. AA 翻訳版) | 最新英語版 (Rev.AB) | 2014年 11月 6日 | |||
ユーザー・ガイド | LOGIC Pocket Data Book (Rev. B) | 2007年 1月 16日 | ||||
アプリケーション・ノート | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 2004年 7月 8日 | ||||
ユーザー・ガイド | Signal Switch Data Book (Rev. A) | 2003年 11月 14日 | ||||
アプリケーション・ノート | TI IBIS File Creation, Validation, and Distribution Processes | 2002年 8月 29日 | ||||
アプリケーション・ノート | CMOS Power Consumption and CPD Calculation (Rev. B) | 1997年 6月 1日 | ||||
アプリケーション・ノート | Designing With Logic (Rev. C) | 1997年 6月 1日 | ||||
アプリケーション・ノート | SN54/74HCT CMOS Logic Family Applications and Restrictions | 1996年 5月 1日 | ||||
アプリケーション・ノート | Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc | 1996年 4月 1日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
14-24-LOGIC-EVM — 14 ピンから 24 ピンの D、DB、DGV、DW、DYY、NS、PW の各パッケージに封止した各種ロジック製品向けの汎用評価基板
14-24-logic-EVM 評価基板は、14 ピンから 24 ピンの D、DW、DB、NS、PW、DYY、DGV の各パッケージに封止した各種ロジック デバイスをサポートする設計を採用しています。
パッケージ | ピン数 | ダウンロード |
---|---|---|
PDIP (N) | 16 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点