ホーム パワー・マネージメント LCD / OLED ディスプレイ向けの電源とドライバ

多様なサイズの TV 向け、ゲート パルス変調スイッチ搭載、全体が I²C プログラマブル、6 チャネル、LCD バイアス IC

TPS65177 は新規設計での使用を推奨しません
従来の設計をサポートできるようにこの製品は引き続き生産中ですが、TI はこの製品を新規の設計には推奨しません。以下の代替品のいずれかをご検討ください。
open-in-new 代替品と比較
比較対象デバイスにアップグレード機能を搭載した、ドロップ・イン代替製品
TPS65177A アクティブ 全サイズ TV 用完全 I2C プログラマブル 6 チャネル LCD バイアス IC、ゲートを含む The product has the same functionality and parametrics.

製品詳細

Vin (min) (V) 8.6 Vin (max) (V) 14.7 Applications 13 to 21 inches, 21 inches and above Source driver voltage (min) (V) 13.5 Source driver voltage (max) (V) 19.8 Level shifter/scan driver (Ch) 0 V_POS (min) (V) 20 V_POS (max) (V) 40 V_NEG (min) (V) -14.5 V_NEG (max) (V) -5.5 Features GPM or GVS, HAVDD, I2C interface, Temperature sensor or compensation Topology Boost, Buck Rating Catalog Operating temperature range (°C) -40 to 85
Vin (min) (V) 8.6 Vin (max) (V) 14.7 Applications 13 to 21 inches, 21 inches and above Source driver voltage (min) (V) 13.5 Source driver voltage (max) (V) 19.8 Level shifter/scan driver (Ch) 0 V_POS (min) (V) 20 V_POS (max) (V) 40 V_NEG (min) (V) -14.5 V_NEG (max) (V) -5.5 Features GPM or GVS, HAVDD, I2C interface, Temperature sensor or compensation Topology Boost, Buck Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RHA) 40 36 mm² 6 x 6
  • Enable / Disable
    • TPS65177: VI power cycle
    • TPS65177A: VI power cycle or EN-pin
  • 8.6-V to 14.7-V Input Voltage Range
  • Non-Synchronous Boost Converter (V(AVDD))
    • Integrated Isolation Switch
    • 13.5-V to 19.8-V Output Voltage (I2C)
    • 15-V Default Output Voltage
    • 4.25-A Switch Current Limit (I2C)
    • High Voltage Stress Mode (I2C)
  • Synchronous Buck Converter (V(HAVDD))
    • 4.8-V to 11.1-V Output Voltage (I2C)
    • 7.5-V Default Output Voltage
    • 1.7-A Switch Current Limit
    • High Voltage Stress Mode (I2C)
  • Non-Synchronous Buck Converter (V(IO))
    • 2.2-V to 3.7-V Output Voltage (I2C)
    • 2.5-V Default Output Voltage
    • 3-A Switch Current Limit
  • Synchronous Buck Converter (V(CORE))
    • 0.8-V to 3.3-V Output Voltage (I2C)
    • 1-V Default Output Voltage
    • 2.5-A Switch Current Limit
  • Positive Charge-Pump Controller (V(GH))
    • 20-V to 40-V Output Voltage (I2C)
    • 28-V Default Output Voltage
    • Temp. Compensation Offset 0-V to 15-V (I2C)
    • 4-V Default Offset (28 V to 32 V)
  • Negative Charge-Pump Controller (V(GL))
    • –14.5-V to –5.5-V Output Voltage (I2C)
    • –7.9-V Default Output Voltage
  • Gate Pulse Modulation (GPM)
    • Down to 0-V, 5-V, 10-V or 15-V (I2C)
    • 0-V Default Discharge Voltage
  • Temperature Compensation for V(GH)
  • Thermal Shutdown
  • I2C Compatible Interface
  • EEPROM Memory
  • 6-mm × 6-mm × 1-mm 40-Pin VQFN Package
  • Enable / Disable
    • TPS65177: VI power cycle
    • TPS65177A: VI power cycle or EN-pin
  • 8.6-V to 14.7-V Input Voltage Range
  • Non-Synchronous Boost Converter (V(AVDD))
    • Integrated Isolation Switch
    • 13.5-V to 19.8-V Output Voltage (I2C)
    • 15-V Default Output Voltage
    • 4.25-A Switch Current Limit (I2C)
    • High Voltage Stress Mode (I2C)
  • Synchronous Buck Converter (V(HAVDD))
    • 4.8-V to 11.1-V Output Voltage (I2C)
    • 7.5-V Default Output Voltage
    • 1.7-A Switch Current Limit
    • High Voltage Stress Mode (I2C)
  • Non-Synchronous Buck Converter (V(IO))
    • 2.2-V to 3.7-V Output Voltage (I2C)
    • 2.5-V Default Output Voltage
    • 3-A Switch Current Limit
  • Synchronous Buck Converter (V(CORE))
    • 0.8-V to 3.3-V Output Voltage (I2C)
    • 1-V Default Output Voltage
    • 2.5-A Switch Current Limit
  • Positive Charge-Pump Controller (V(GH))
    • 20-V to 40-V Output Voltage (I2C)
    • 28-V Default Output Voltage
    • Temp. Compensation Offset 0-V to 15-V (I2C)
    • 4-V Default Offset (28 V to 32 V)
  • Negative Charge-Pump Controller (V(GL))
    • –14.5-V to –5.5-V Output Voltage (I2C)
    • –7.9-V Default Output Voltage
  • Gate Pulse Modulation (GPM)
    • Down to 0-V, 5-V, 10-V or 15-V (I2C)
    • 0-V Default Discharge Voltage
  • Temperature Compensation for V(GH)
  • Thermal Shutdown
  • I2C Compatible Interface
  • EEPROM Memory
  • 6-mm × 6-mm × 1-mm 40-Pin VQFN Package

The TPS65177/A provides all supply rails needed by a GIP (Gate-in-Panel) or non-GIP TFT-LCD panel. All output voltages are I2C programmable.

V(IO) and V(CORE) for the T-CON, V(AVDD) and V(HAVDD) for the Source Driver and the Gamma Buffer, V(GH) and V(GL) for the Gate Driver or the Level Shifter. For use with non-GIP technology Gate Pulse Modulation (GPM) is implemented, for use with GIP technology the V(GH) rail can be temperature compensated. Furthermore a High Voltage Stress Mode (HVS) for V(AVDD) and V(HAVDD) and an integrated V(AVDD) Isolation Switch is implemented. V(CORE), V(HAVDD), V(GH), V(GL), GPM and the V(GH) temperature compensation can be enabled and disabled by I2C programming.

A single BOM (Bill of Materials) can cover several panel types and sizes whose desired output voltage levels can be programmed in production and stored in a non-volatile integrated memory.

The TPS65177/A provides all supply rails needed by a GIP (Gate-in-Panel) or non-GIP TFT-LCD panel. All output voltages are I2C programmable.

V(IO) and V(CORE) for the T-CON, V(AVDD) and V(HAVDD) for the Source Driver and the Gamma Buffer, V(GH) and V(GL) for the Gate Driver or the Level Shifter. For use with non-GIP technology Gate Pulse Modulation (GPM) is implemented, for use with GIP technology the V(GH) rail can be temperature compensated. Furthermore a High Voltage Stress Mode (HVS) for V(AVDD) and V(HAVDD) and an integrated V(AVDD) Isolation Switch is implemented. V(CORE), V(HAVDD), V(GH), V(GL), GPM and the V(GH) temperature compensation can be enabled and disabled by I2C programming.

A single BOM (Bill of Materials) can cover several panel types and sizes whose desired output voltage levels can be programmed in production and stored in a non-volatile integrated memory.

ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
8 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TPS65177/A Fully I2C Programmable 6-CH LCD Bias IC for all Size TV Including Gate Pulse Modulation データシート (Rev. C) PDF | HTML 2016年 2月 17日
アプリケーション・ノート 昇圧コンバータの電力段に関する基本的な計算 (Rev. D 翻訳版) PDF | HTML 英語版 (Rev.D) PDF | HTML 2022年 12月 1日
アプリケーション・ノート Basic Calculation of a Boost Converter's Power Stage... (Rev. D) PDF | HTML 2022年 11月 21日
アプリケーション・ノート Understanding Undervoltage Lockout in Power Devices (Rev. A) 2018年 9月 19日
セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018年 9月 13日
アプリケーション・ノート Generation of a VCOM buffer input using PWM signal 2015年 12月 21日
アプリケーション・ノート Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015年 8月 17日
アプリケーション・ノート Minimizing Ringing at the Switch Node of a Boost Converter 2006年 9月 15日

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

シミュレーション・ツール

PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
VQFN (RHA) 40 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 材質成分
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ